[Sat Sep 24 13:58:13 2011] Detection parameters:
  Position = (306.1, 26.2) = 17 45 41.62 -28 59 52.6
  Extent = 0.5" x 0.5", rotation angle = 94 degrees
  Source counts = 14.9 +/- 5.2
  Background counts = 12.1
  Rate = 0.0004 +/- 0.0001

[Sat Sep 24 13:58:16 2011] Off-axis axis estimate = 0.41'
[Sat Sep 24 14:00:25 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:00:25 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Sat Sep 24 14:00:25 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.877
[Sat Sep 24 14:00:25 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 0.40"
[Sat Sep 24 14:00:25 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src23.ximg exists
[Sat Sep 24 14:00:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src23.csv
[Sat Sep 24 14:00:26 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src23_1.ximg exists
[Sat Sep 24 14:00:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src23.csv
[Sat Sep 24 14:00:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:00:27 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Sat Sep 24 14:00:27 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Sat Sep 24 14:00:27 2011] Fit fullrun_ccd2_acisf02943_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Sat Sep 24 14:00:56 2011] Spatial fit model total counts = 69.146000, observed total counts = 74.000000
[Sat Sep 24 14:00:56 2011] Offset between fit and detection position for source 43 = 0.510867 pixels
[Sat Sep 24 14:00:56 2011] 70.020200 total counts/ 57.393300 bgd. counts: snr = 1.666733
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.510867 pixels
  Position = (306.6, 26.5) = 17 45 41.62 -28 59 52.7
  Extent = 0.4 (0.1-1.0)", rotation angle = 0
  Source counts = 12.6 +/- 8.4
  Background counts = 57.4
  Rate = 0.0003 +/- 0.0002
[Sat Sep 24 14:00:57 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:00:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:00:57 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:00:57 2011] Source does appear to be extended
[Sat Sep 24 14:00:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:01:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:01:43 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Sat Sep 24 14:01:43 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.283
[Sat Sep 24 14:01:43 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 0.41"
[Sat Sep 24 14:01:44 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src20.ximg exists
[Sat Sep 24 14:01:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src20.csv
[Sat Sep 24 14:01:44 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src20_1.ximg exists
[Sat Sep 24 14:01:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src20.csv
[Sat Sep 24 14:01:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:01:45 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Sat Sep 24 14:01:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src20.csv
[Sat Sep 24 14:01:45 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Sep 24 14:01:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src20.csv
[Sat Sep 24 14:01:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:02:07 2011] Warning, spatial fit 20 centroid is now closest to src. 81
[Sat Sep 24 14:02:07 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:02:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:02:07 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:02:07 2011] Source does appear to be extended
[Sat Sep 24 14:02:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:04:45 2011] Not overwriting source region fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src43_src.reg
[Sat Sep 24 14:04:45 2011] Extracting stamp from image fullrun_ccd2_acisf02943_pi14-548_cl_sm2.00.img.gz, (288, 8) - (325, 45)
[Sat Sep 24 14:04:45 2011] Writing fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src43.gif
[Sat Sep 24 14:05:52 2011] ../../acisf02943/products/events/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src43_src.evt and ../../acisf02943/products/events/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src43_bgd.evt exist, delete to re-create
[Sat Sep 24 14:05:53 2011] Size of ../../acisf02943/products/events/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src43_src.evt.gz[events] = 22 counts
[Sat Sep 24 14:05:53 2011] Mean chipx,y = (44.05, 1010.05)
[Sat Sep 24 14:05:53 2011] Mean tdetx,y = (4071.05, 4041.95)
[Sat Sep 24 14:05:53 2011] chipx,y range = (28.00-61.00, 1004.00-1022.00)
[Sat Sep 24 14:05:53 2011] Size of ../../acisf02943/products/events/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src43_bgd.evt.gz[events] = 73 counts
[Sat Sep 24 14:05:53 2011] ../../acisf02943/products/images/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src43_src.img and ../../acisf02943/products/images/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src43_bgd.img exist, delete to re-create
[Sat Sep 24 14:05:53 2011] ../../acisf02943/products/spectra/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src43_src.pi and ../../acisf02943/products/spectra/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src43_bgd.pi exist, delete to re-create
[Sat Sep 24 14:05:53 2011] Not generating rmf since there are only 12 counts
[Sat Sep 24 14:05:57 2011] ../../acisf02943/products/lightcurves/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src43_src.lc and ../../acisf02943/products/lightcurves/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src43_bgd.lc exist, delete to re-create
[Sat Sep 24 14:07:13 2011] 108.391
[Sat Sep 24 14:10:42 2011] Updating aperture counts using extracted products
[Sat Sep 24 14:10:42 2011] Error reading totcts from fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src43_src.pi.gz
[Sat Sep 24 14:10:42 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 14:10:42 2011] Using photon index=1.80, rate=0.000333, arf fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src43.arf
[Sat Sep 24 14:10:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 14:10:42 2011] Updating source flux to 9.5e-15
[Sat Sep 24 14:10:57 2011] Source 43 has fewer than 100.000000 counts, skipping spectral fitting