[Sat Sep 24 13:58:11 2011] Detection parameters:
  Position = (745.5, 370.5) = 17 45 25.15 -28 57 3.2
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 14.4 +/- 4.0
  Background counts = 1.6
  Rate = 0.0004 +/- 0.0001

[Sat Sep 24 13:58:16 2011] Off-axis axis estimate = 4.67'
[Sat Sep 24 14:00:25 2011] Using EEF radius (= 1.05 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:00:25 2011] Initial guess for spatial extent in simple fitting = 1.05"
[Sat Sep 24 14:00:25 2011] source mask rpix=2.1, npix_max = 27, mask sum = 21, frac = 0.752
[Sat Sep 24 14:00:25 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 1.05"
[Sat Sep 24 14:00:26 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src26.ximg exists
[Sat Sep 24 14:00:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src26.csv
[Sat Sep 24 14:00:26 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src26_1.ximg exists
[Sat Sep 24 14:00:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src26.csv
[Sat Sep 24 14:00:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:00:27 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Sat Sep 24 14:00:27 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Sat Sep 24 14:00:27 2011] Fit fullrun_ccd2_acisf02943_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Sat Sep 24 14:00:57 2011] Spatial fit model total counts = 28.968200, observed total counts = 26.000000
[Sat Sep 24 14:00:57 2011] Offset between fit and detection position for source 22 = 1.444874 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 1.444874 pixels
  Position = (746.6, 371.4) = 17 45 25.12 -28 57 3.0
  Extent = 0.9 (0.8-1.3)", rotation angle = 0
  Source counts = 27.9 +/- 5.3
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Sat Sep 24 14:00:57 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:00:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:00:57 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:00:57 2011] Source does appear to be extended
[Sat Sep 24 14:00:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:01:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:01:43 2011] Initial guess for spatial extent in simple fitting = 0.89"
[Sat Sep 24 14:01:43 2011] source mask rpix=1.8, npix_max = 21, mask sum = 18, frac = 0.843
[Sat Sep 24 14:01:43 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 0.89"
[Sat Sep 24 14:01:44 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src23.ximg exists
[Sat Sep 24 14:01:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src23.csv
[Sat Sep 24 14:01:44 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src23_1.ximg exists
[Sat Sep 24 14:01:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src23.csv
[Sat Sep 24 14:01:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:01:45 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Sat Sep 24 14:01:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src23.csv
[Sat Sep 24 14:01:45 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Sat Sep 24 14:01:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src23.csv
[Sat Sep 24 14:01:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:02:07 2011] Spatial fit model total counts = 32.364400, observed total counts = 29.000000
[Sat Sep 24 14:02:07 2011] Offset between fit and detection position for source 22 = 0.067738 pixels
[Sat Sep 24 14:02:07 2011] 31.267400 total counts/ 10.892200 bgd. counts: snr = 6.173679
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.067738 pixels
  Position = (746.7, 371.4) = 17 45 25.12 -28 57 3.0
  Extent = 0.7 (0.4-1.1)", rotation angle = 0
  Source counts = 20.4 +/- 5.6
  Background counts = 10.9
  Rate = 0.0005 +/- 0.0001
[Sat Sep 24 14:02:07 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:02:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:02:07 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:02:07 2011] Source does appear to be extended
[Sat Sep 24 14:02:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:04:45 2011] Not overwriting source region fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src22_src.reg
[Sat Sep 24 14:04:45 2011] Extracting stamp from image fullrun_ccd2_acisf02943_pi14-548_cl_sm2.00.img.gz, (713, 337) - (781, 405)
[Sat Sep 24 14:04:45 2011] Writing fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src22.gif
[Sat Sep 24 14:06:04 2011] ../../acisf02943/products/events/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src22_src.evt and ../../acisf02943/products/events/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src22_bgd.evt exist, delete to re-create
[Sat Sep 24 14:06:04 2011] Size of ../../acisf02943/products/events/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src22_src.evt.gz[events] = 23 counts
[Sat Sep 24 14:06:04 2011] Mean chipx,y = (554.04, 800.52)
[Sat Sep 24 14:06:04 2011] Mean tdetx,y = (3861.52, 3531.96)
[Sat Sep 24 14:06:04 2011] chipx,y range = (540.00-575.00, 779.00-818.00)
[Sat Sep 24 14:06:04 2011] Size of ../../acisf02943/products/events/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 34 counts
[Sat Sep 24 14:06:04 2011] ../../acisf02943/products/images/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src22_src.img and ../../acisf02943/products/images/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src22_bgd.img exist, delete to re-create
[Sat Sep 24 14:06:04 2011] ../../acisf02943/products/spectra/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src22_src.pi and ../../acisf02943/products/spectra/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src22_bgd.pi exist, delete to re-create
[Sat Sep 24 14:06:04 2011] Not generating rmf since there are only 20 counts
[Sat Sep 24 14:06:07 2011] ../../acisf02943/products/lightcurves/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src22_src.lc and ../../acisf02943/products/lightcurves/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src22_bgd.lc exist, delete to re-create
[Sat Sep 24 14:07:13 2011] 136.691
[Sat Sep 24 14:10:42 2011] Updating aperture counts using extracted products
[Sat Sep 24 14:10:42 2011] Error reading totcts from fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src22_src.pi.gz
[Sat Sep 24 14:10:42 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 14:10:42 2011] Using photon index=1.80, rate=0.000537, arf fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src22.arf
[Sat Sep 24 14:10:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 14:10:42 2011] Updating source flux to 1.2e-14
[Sat Sep 24 14:10:57 2011] Source 22 has fewer than 100.000000 counts, skipping spectral fitting