[Sat Sep 24 13:58:10 2011] Detection parameters:
  Position = (352.8, 129.6) = 17 45 39.87 -28 59 1.8
  Extent = 0.6" x 0.5", rotation angle = 118 degrees
  Source counts = 20.6 +/- 5.1
  Background counts = 5.4
  Rate = 0.0005 +/- 0.0001

[Sat Sep 24 13:58:16 2011] Off-axis axis estimate = 1.23'
[Sat Sep 24 14:00:25 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:00:25 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sat Sep 24 14:00:25 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.919
[Sat Sep 24 14:00:25 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.38"
[Sat Sep 24 14:00:25 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src17.ximg exists
[Sat Sep 24 14:00:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src17.csv
[Sat Sep 24 14:00:25 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src17_1.ximg exists
[Sat Sep 24 14:00:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src17.csv
[Sat Sep 24 14:00:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:00:27 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Sat Sep 24 14:00:27 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Sep 24 14:00:27 2011] Fit fullrun_ccd2_acisf02943_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Sat Sep 24 14:00:56 2011] Spatial fit model total counts = 39.994300, observed total counts = 40.000000
[Sat Sep 24 14:00:56 2011] Offset between fit and detection position for source 14 = 0.877915 pixels
[Sat Sep 24 14:00:56 2011] 39.528000 total counts/ 19.237000 bgd. counts: snr = 4.626311
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.877915 pixels
  Position = (353.0, 130.4) = 17 45 39.88 -28 59 1.6
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 20.3 +/- 6.3
  Background counts = 19.2
  Rate = 0.0005 +/- 0.0002
[Sat Sep 24 14:00:57 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:00:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:00:57 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:00:57 2011] Source does appear to be extended
[Sat Sep 24 14:00:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:01:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:01:43 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sat Sep 24 14:01:43 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.899
[Sat Sep 24 14:01:43 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.39"
[Sat Sep 24 14:01:44 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src15.ximg exists
[Sat Sep 24 14:01:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src15.csv
[Sat Sep 24 14:01:44 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src15_1.ximg exists
[Sat Sep 24 14:01:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src15.csv
[Sat Sep 24 14:01:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:01:45 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Sat Sep 24 14:01:45 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Sep 24 14:01:45 2011] Fit fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Sat Sep 24 14:02:07 2011] Spatial fit model total counts = 37.987200, observed total counts = 38.000000
[Sat Sep 24 14:02:07 2011] Offset between fit and detection position for source 14 = 0.003393 pixels
[Sat Sep 24 14:02:07 2011] 37.788500 total counts/ 17.298500 bgd. counts: snr = 4.926491
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.003393 pixels
  Position = (353.0, 130.4) = 17 45 39.88 -28 59 1.6
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 20.5 +/- 6.1
  Background counts = 17.3
  Rate = 0.0005 +/- 0.0002
[Sat Sep 24 14:02:07 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:02:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:02:07 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:02:07 2011] Source does appear to be extended
[Sat Sep 24 14:02:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:04:45 2011] Not overwriting source region fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src14_src.reg
[Sat Sep 24 14:04:45 2011] Extracting stamp from image fullrun_ccd2_acisf02943_pi14-548_cl_sm2.00.img.gz, (335, 113) - (371, 148)
[Sat Sep 24 14:04:45 2011] Writing fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src14.gif
[Sat Sep 24 14:05:35 2011] ../../acisf02943/products/events/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src14_src.evt and ../../acisf02943/products/events/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Sat Sep 24 14:05:35 2011] Size of ../../acisf02943/products/events/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src14_src.evt.gz[events] = 22 counts
[Sat Sep 24 14:05:35 2011] Mean chipx,y = (112.86, 934.18)
[Sat Sep 24 14:05:35 2011] Mean tdetx,y = (3995.18, 3973.14)
[Sat Sep 24 14:05:35 2011] chipx,y range = (98.00-131.00, 915.00-949.00)
[Sat Sep 24 14:05:35 2011] Size of ../../acisf02943/products/events/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 33 counts
[Sat Sep 24 14:05:35 2011] ../../acisf02943/products/images/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src14_src.img and ../../acisf02943/products/images/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Sat Sep 24 14:05:35 2011] ../../acisf02943/products/spectra/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src14_src.pi and ../../acisf02943/products/spectra/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Sat Sep 24 14:05:35 2011] Not generating rmf since there are only 20 counts
[Sat Sep 24 14:05:39 2011] ../../acisf02943/products/lightcurves/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src14_src.lc and ../../acisf02943/products/lightcurves/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Sat Sep 24 14:07:13 2011] 198.324
[Sat Sep 24 14:10:42 2011] Updating aperture counts using extracted products
[Sat Sep 24 14:10:42 2011] Error reading totcts from fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src14_src.pi.gz
[Sat Sep 24 14:10:42 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 14:10:42 2011] Using photon index=1.80, rate=0.00054, arf fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src14.arf
[Sat Sep 24 14:10:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 14:10:42 2011] Updating source flux to 8.4e-15
[Sat Sep 24 14:10:57 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting