[Sat Sep 24 13:58:10 2011] Detection parameters:
  Position = (1062.8, 453.7) = 17 45 13.25 -28 56 22.2
  Extent = 0.5" x 0.5", rotation angle = 41 degrees
  Source counts = 26.3 +/- 5.9
  Background counts = 8.7
  Rate = 0.0007 +/- 0.0002

[Sat Sep 24 13:58:16 2011] Off-axis axis estimate = 7.15'
[Sat Sep 24 14:00:24 2011] Using EEF radius (= 2.27 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:00:24 2011] Initial guess for spatial extent in simple fitting = 2.27"
[Sat Sep 24 14:00:24 2011] source mask rpix=4.6, npix_max = 104, mask sum = 90, frac = 0.858
[Sat Sep 24 14:00:24 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 2.27"
[Sat Sep 24 14:00:25 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src11.ximg exists
[Sat Sep 24 14:00:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src11.csv
[Sat Sep 24 14:00:25 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src11_1.ximg exists
[Sat Sep 24 14:00:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src11.csv
[Sat Sep 24 14:00:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02943_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:00:27 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sat Sep 24 14:00:27 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Sep 24 14:00:27 2011] Fit fullrun_ccd2_acisf02943_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Sep 24 14:00:56 2011] Spatial fit model total counts = 70.110200, observed total counts = 77.000000
[Sat Sep 24 14:00:56 2011] Offset between fit and detection position for source 11 = 2.398001 pixels
[Sat Sep 24 14:00:56 2011] 68.859700 total counts/ 22.576900 bgd. counts: snr = 9.740639
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 2.398001 pixels
  Position = (1065.1, 452.9) = 17 45 13.19 -28 56 22.8
  Extent = 2.4 (1.5-3.8)", rotation angle = 0
  Source counts = 46.3 +/- 8.3
  Background counts = 22.6
  Rate = 0.001 +/- 0.0002
[Sat Sep 24 14:00:57 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:00:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:00:57 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:00:57 2011] Source does appear to be extended
[Sat Sep 24 14:00:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:01:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:01:43 2011] Initial guess for spatial extent in simple fitting = 2.40"
[Sat Sep 24 14:01:43 2011] source mask rpix=4.9, npix_max = 115, mask sum = 90, frac = 0.778
[Sat Sep 24 14:01:43 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 2.40"
[Sat Sep 24 14:01:44 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src10.ximg exists
[Sat Sep 24 14:01:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src10.csv
[Sat Sep 24 14:01:44 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src10_1.ximg exists
[Sat Sep 24 14:01:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src10.csv
[Sat Sep 24 14:01:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02943_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:01:45 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sat Sep 24 14:01:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src10.csv
[Sat Sep 24 14:01:45 2011] fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Sep 24 14:01:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src10.csv
[Sat Sep 24 14:01:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02943_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:02:07 2011] Warning, spatial fit 10 centroid is now closest to src. 35
[Sat Sep 24 14:02:07 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:02:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:02:07 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:02:07 2011] Source does appear to be extended
[Sat Sep 24 14:02:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:04:45 2011] Not overwriting source region fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src11_src.reg
[Sat Sep 24 14:04:45 2011] Extracting stamp from image fullrun_ccd2_acisf02943_pi14-548_cl_sm2.00.img.gz, (955, 343) - (1175, 563)
[Sat Sep 24 14:04:45 2011] Writing fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src11.gif
[Sat Sep 24 14:05:20 2011] ../../acisf02943/products/events/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src11_src.evt and ../../acisf02943/products/events/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Sat Sep 24 14:05:20 2011] Size of ../../acisf02943/products/events/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src11_src.evt.gz[events] = 94 counts
[Sat Sep 24 14:05:20 2011] Mean chipx,y = (885.14, 799.06)
[Sat Sep 24 14:05:20 2011] Mean tdetx,y = (3860.06, 3200.86)
[Sat Sep 24 14:05:20 2011] chipx,y range = (860.00-910.00, 763.00-830.00)
[Sat Sep 24 14:05:20 2011] Size of ../../acisf02943/products/events/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 377 counts
[Sat Sep 24 14:05:20 2011] ../../acisf02943/products/images/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src11_src.img and ../../acisf02943/products/images/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Sat Sep 24 14:05:20 2011] ../../acisf02943/products/spectra/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src11_src.pi and ../../acisf02943/products/spectra/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Sat Sep 24 14:05:20 2011] Not generating rmf since there are only 46 counts
[Sat Sep 24 14:05:24 2011] ../../acisf02943/products/lightcurves/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src11_src.lc and ../../acisf02943/products/lightcurves/fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Sat Sep 24 14:07:12 2011] 169.347
[Sat Sep 24 14:10:42 2011] Updating aperture counts using extracted products
[Sat Sep 24 14:10:42 2011] Error reading totcts from fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src11_src.pi.gz
[Sat Sep 24 14:10:42 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 14:10:42 2011] Using photon index=1.80, rate=0.00122, arf fullrun_ccd2_acisf02943_pi14-548_pass1_cl_src11.arf
[Sat Sep 24 14:10:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 14:10:42 2011] Updating source flux to 2.2e-14
[Sat Sep 24 14:10:57 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting