[Sat Sep 24 13:58:02 2011] Detection parameters:
  Position = (940.5, 1163.3) = 17 45 46.14 -29 0 57.5
  Extent = 1.0" x 0.5", rotation angle = 137 degrees
  Source counts = 13.7 +/- 4.5
  Background counts = 6.3
  Rate = 0.0004 +/- 0.0001

[Sat Sep 24 13:58:07 2011] Off-axis axis estimate = 1.38'
[Sat Sep 24 14:00:21 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:00:21 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sat Sep 24 14:00:21 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.358
[Sat Sep 24 14:00:21 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.39"
[Sat Sep 24 14:00:24 2011] fullrun_ccd1_acisf02943_pi14-548_cl_pass0_src21.ximg exists
[Sat Sep 24 14:00:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02943_pi14-548_cl_pass0_src21.csv
[Sat Sep 24 14:00:24 2011] fullrun_ccd1_acisf02943_pi14-548_cl_pass0_src21_1.ximg exists
[Sat Sep 24 14:00:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02943_pi14-548_cl_pass0_src21.csv
[Sat Sep 24 14:00:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf02943_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf02943_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:00:24 2011] fullrun_ccd1_acisf02943_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Sat Sep 24 14:00:24 2011] fullrun_ccd1_acisf02943_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Sat Sep 24 14:00:24 2011] Fit fullrun_ccd1_acisf02943_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Sat Sep 24 14:00:51 2011] Spatial fit model total counts = 30.639500, observed total counts = 31.000000
[Sat Sep 24 14:00:51 2011] Offset between fit and detection position for source 23 = 0.931439 pixels
[Sat Sep 24 14:00:51 2011] 28.893100 total counts/ 15.194400 bgd. counts: snr = 3.514290
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.931439 pixels
  Position = (941.0, 1164.1) = 17 45 46.14 -29 0 57.4
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 13.7 +/- 5.4
  Background counts = 15.2
  Rate = 0.0004 +/- 0.0001
[Sat Sep 24 14:00:51 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:00:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:00:51 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:00:51 2011] Source does appear to be extended
[Sat Sep 24 14:00:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:01:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:01:40 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Sat Sep 24 14:01:40 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.233
[Sat Sep 24 14:01:40 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 0.64"
[Sat Sep 24 14:01:41 2011] fullrun_ccd1_acisf02943_pi14-548_cl_pass1_src21.ximg exists
[Sat Sep 24 14:01:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02943_pi14-548_cl_pass1_src21.csv
[Sat Sep 24 14:01:41 2011] fullrun_ccd1_acisf02943_pi14-548_cl_pass1_src21_1.ximg exists
[Sat Sep 24 14:01:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02943_pi14-548_cl_pass1_src21.csv
[Sat Sep 24 14:01:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf02943_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf02943_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:01:43 2011] fullrun_ccd1_acisf02943_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Sat Sep 24 14:01:43 2011] fullrun_ccd1_acisf02943_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Sep 24 14:01:43 2011] Fit fullrun_ccd1_acisf02943_pi14-548_cl_pass1_tfrozen_src21 appears to have run properly
[Sat Sep 24 14:02:02 2011] Spatial fit model total counts = 26.169300, observed total counts = 27.000000
[Sat Sep 24 14:02:02 2011] Offset between fit and detection position for source 23 = 0.033373 pixels
[Sat Sep 24 14:02:02 2011] 24.371800 total counts/ 10.914100 bgd. counts: snr = 4.073586
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.033373 pixels
  Position = (941.0, 1164.1) = 17 45 46.14 -29 0 57.4
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 13.5 +/- 4.9
  Background counts = 10.9
  Rate = 0.0004 +/- 0.0001
[Sat Sep 24 14:02:02 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:02:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:02:02 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:02:02 2011] Source does appear to be extended
[Sat Sep 24 14:02:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:03:17 2011] Not overwriting source region fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src23_src.reg
[Sat Sep 24 14:03:17 2011] Extracting stamp from image fullrun_ccd1_acisf02943_pi14-548_cl_sm2.00.img.gz, (913, 1136) - (969, 1192)
[Sat Sep 24 14:03:17 2011] Writing fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src23.gif
[Sat Sep 24 14:04:16 2011] ../../acisf02943/products/events/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src23_src.evt and ../../acisf02943/products/events/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Sat Sep 24 14:04:16 2011] Size of ../../acisf02943/products/events/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src23_src.evt.gz[events] = 17 counts
[Sat Sep 24 14:04:16 2011] Mean chipx,y = (81.76, 953.53)
[Sat Sep 24 14:04:16 2011] Mean tdetx,y = (4178.47, 4188.76)
[Sat Sep 24 14:04:16 2011] chipx,y range = (67.00-99.00, 936.00-970.00)
[Sat Sep 24 14:04:16 2011] Size of ../../acisf02943/products/events/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 76 counts
[Sat Sep 24 14:04:16 2011] ../../acisf02943/products/images/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src23_src.img and ../../acisf02943/products/images/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Sat Sep 24 14:04:16 2011] ../../acisf02943/products/spectra/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src23_src.pi and ../../acisf02943/products/spectra/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Sat Sep 24 14:04:16 2011] Not generating rmf since there are only 13 counts
[Sat Sep 24 14:04:19 2011] ../../acisf02943/products/lightcurves/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src23_src.lc and ../../acisf02943/products/lightcurves/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Sat Sep 24 14:04:44 2011] 195.603
[Sat Sep 24 14:10:41 2011] Updating aperture counts using extracted products
[Sat Sep 24 14:10:41 2011] Error reading totcts from fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src23_src.pi.gz
[Sat Sep 24 14:10:42 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 14:10:42 2011] Using photon index=1.80, rate=0.000354, arf fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src23.arf
[Sat Sep 24 14:10:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 14:10:42 2011] Updating source flux to 5.6e-15
[Sat Sep 24 14:10:52 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting