[Sat Sep 24 13:57:58 2011] Detection parameters:
  Position = (999.7, 677.6) = 17 45 43.92 -29 4 56.5
  Extent = 1.1" x 0.5", rotation angle = 27 degrees
  Source counts = 124.8 +/- 11.5
  Background counts = 7.2
  Rate = 0.003 +/- 0.0003

[Sat Sep 24 13:58:07 2011] Off-axis axis estimate = 4.75'
[Sat Sep 24 14:00:21 2011] Using EEF radius (= 1.08 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:00:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 14:00:21 2011] Initial guess for spatial extent in simple fitting = 1.08"
[Sat Sep 24 14:00:21 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.855
[Sat Sep 24 14:00:21 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.08"
[Sat Sep 24 14:00:22 2011] fullrun_ccd1_acisf02943_pi14-548_cl_pass0_src1.ximg exists
[Sat Sep 24 14:00:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02943_pi14-548_cl_pass0_src1.csv
[Sat Sep 24 14:00:22 2011] fullrun_ccd1_acisf02943_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Sep 24 14:00:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02943_pi14-548_cl_pass0_src1.csv
[Sat Sep 24 14:00:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf02943_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf02943_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:00:24 2011] fullrun_ccd1_acisf02943_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep 24 14:00:24 2011] fullrun_ccd1_acisf02943_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep 24 14:00:24 2011] Fit fullrun_ccd1_acisf02943_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep 24 14:00:51 2011] Spatial fit model total counts = 138.999000, observed total counts = 139.000000
[Sat Sep 24 14:00:51 2011] Offset between fit and detection position for source 1 = 0.964950 pixels
[Sat Sep 24 14:00:51 2011] 139.542900 total counts/ 36.258900 bgd. counts: snr = 17.152433
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.964950 pixels
  Position = (1000.5, 678.2) = 17 45 43.91 -29 4 56.4
  Extent = 0.8 (0.6-0.9)", rotation angle = 0
  Source counts = 103.3 +/- 11.8
  Background counts = 36.3
  Rate = 0.003 +/- 0.0003
[Sat Sep 24 14:00:51 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:00:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:00:51 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:00:51 2011] Source does appear to be extended
[Sat Sep 24 14:00:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:01:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:01:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 14:01:40 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Sat Sep 24 14:01:40 2011] source mask rpix=1.5, npix_max = 16, mask sum = 20, frac = 1.203
[Sat Sep 24 14:01:40 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.76"
[Sat Sep 24 14:01:40 2011] fullrun_ccd1_acisf02943_pi14-548_cl_pass1_src1.ximg exists
[Sat Sep 24 14:01:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02943_pi14-548_cl_pass1_src1.csv
[Sat Sep 24 14:01:40 2011] fullrun_ccd1_acisf02943_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Sep 24 14:01:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02943_pi14-548_cl_pass1_src1.csv
[Sat Sep 24 14:01:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf02943_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf02943_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:01:41 2011] fullrun_ccd1_acisf02943_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep 24 14:01:41 2011] fullrun_ccd1_acisf02943_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep 24 14:01:41 2011] Fit fullrun_ccd1_acisf02943_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep 24 14:02:02 2011] Spatial fit model total counts = 138.000000, observed total counts = 138.000000
[Sat Sep 24 14:02:02 2011] Offset between fit and detection position for source 1 = 0.075996 pixels
[Sat Sep 24 14:02:02 2011] 137.038200 total counts/ 36.839200 bgd. counts: snr = 16.508526
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.075996 pixels
  Position = (1000.5, 678.2) = 17 45 43.91 -29 4 56.4
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 100.2 +/- 11.7
  Background counts = 36.8
  Rate = 0.003 +/- 0.0003
[Sat Sep 24 14:02:02 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:02:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:02:02 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:02:02 2011] Source does appear to be extended
[Sat Sep 24 14:02:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:03:16 2011] Not overwriting source region fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src1_src.reg
[Sat Sep 24 14:03:16 2011] Extracting stamp from image fullrun_ccd1_acisf02943_pi14-548_cl_sm2.00.img.gz, (967, 645) - (1034, 712)
[Sat Sep 24 14:03:16 2011] Writing fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src1.gif
[Sat Sep 24 14:03:18 2011] ../../acisf02943/products/events/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src1_src.evt and ../../acisf02943/products/events/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Sep 24 14:03:18 2011] Size of ../../acisf02943/products/events/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src1_src.evt.gz[events] = 119 counts
[Sat Sep 24 14:03:18 2011] Mean chipx,y = (146.18, 466.37)
[Sat Sep 24 14:03:18 2011] Mean tdetx,y = (4665.63, 4253.18)
[Sat Sep 24 14:03:18 2011] chipx,y range = (128.00-167.00, 450.00-485.00)
[Sat Sep 24 14:03:18 2011] Size of ../../acisf02943/products/events/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 43 counts
[Sat Sep 24 14:03:18 2011] ../../acisf02943/products/images/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src1_src.img and ../../acisf02943/products/images/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Sep 24 14:03:18 2011] ../../acisf02943/products/spectra/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src1_src.pi and ../../acisf02943/products/spectra/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Sep 24 14:03:21 2011] ../../acisf02943/products/lightcurves/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src1_src.lc and ../../acisf02943/products/lightcurves/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Sep 24 14:04:43 2011] Keeping rmf generated by specextract
[Sat Sep 24 14:04:44 2011] 195.962
[Sat Sep 24 14:10:41 2011] Updating aperture counts using extracted products
[Sat Sep 24 14:10:41 2011] Error reading totcts from fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Sep 24 14:10:41 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 14:10:41 2011] Using photon index=1.80, rate=0.00264, arf fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src1.arf
[Sat Sep 24 14:10:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 14:10:41 2011] Updating source flux to 4.1e-14
[Sat Sep 24 14:10:57 2011] Reading fit data from acisf02943/analysis//spectral/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src1_pl.csv
[Sat Sep 24 14:10:57 2011] Spectral fit parameter nH value = 3.63295e+21
[Sat Sep 24 14:10:57 2011] Spectral fit parameter PhoIndex value = 6.28443
[Sat Sep 24 14:10:57 2011] Failed to get F(0.3-8.0) from acisf02943/analysis//spectral/fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Sep 24 14:10:57 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 14:10:57 2011] Using Nh = 3.6e+21, photon index=6.28, rate=0.00264, arf fullrun_ccd1_acisf02943_pi14-548_pass1_cl_src1.arf
[Sat Sep 24 14:10:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 14:10:57 2011] Updating source flux to 2.6e-14