[Wed Apr 11 02:01:01 2012] Detection parameters:
  Position = (929.2, 339.8) = 3 38 36.71 -35 35 54.7
  Extent = 0.7" x 0.5", rotation angle = 73 degrees
  Source counts = 11.0 +/- 3.6
  Background counts = 2.0
  Rate = 0.0004 +/- 0.0001

[Wed Apr 11 02:01:02 2012] Off-axis axis estimate = 3.12'
[Wed Apr 11 02:02:02 2012] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 02:02:02 2012] Initial guess for spatial extent in simple fitting = 0.60"
[Wed Apr 11 02:02:02 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.339
[Wed Apr 11 02:02:02 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 0.60"
[Wed Apr 11 02:02:04 2012] fullrun_ccd7_acisf02942_pi14-548_cl_pass0_src43.ximg exists
[Wed Apr 11 02:02:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02942_pi14-548_cl_pass0_src43.csv
[Wed Apr 11 02:02:04 2012] fullrun_ccd7_acisf02942_pi14-548_cl_pass0_src43_1.ximg exists
[Wed Apr 11 02:02:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02942_pi14-548_cl_pass0_src43.csv
[Wed Apr 11 02:02:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02942_pi14-548_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02942_pi14-548_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 02:02:05 2012] fullrun_ccd7_acisf02942_pi14-548_cl_pass0_tfrozen_src43.ximg exists
[Wed Apr 11 02:02:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02942_pi14-548_cl_pass0_tfrozen_src43.csv
[Wed Apr 11 02:02:05 2012] fullrun_ccd7_acisf02942_pi14-548_cl_pass0_tfrozen_src43_1.ximg exists
[Wed Apr 11 02:02:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02942_pi14-548_cl_pass0_tfrozen_src43.csv
[Wed Apr 11 02:02:05 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02942_pi14-548_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02942_pi14-548_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 02:02:20 2012] Spatial fit model total counts = 15.243400, observed total counts = 18.000000
[Wed Apr 11 02:02:20 2012] Offset between fit and detection position for source 29 = 0.437248 pixels
[Wed Apr 11 02:02:20 2012] 15.074250 total counts/ 3.127750 bgd. counts: snr = 6.754989
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.437248 pixels
  Position = (929.6, 339.8) = 3 38 36.71 -35 35 55.0
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 11.9 +/- 3.9
  Background counts = 3.1
  Rate = 0.0004 +/- 0.0001
[Wed Apr 11 02:02:21 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 02:02:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 02:02:21 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 02:02:21 2012] Source does appear to be extended
[Wed Apr 11 02:02:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 02:02:21 2012] Deleting source due to low Poisson probability 0.8