[Fri Sep 30 07:39:16 2011] Detection parameters:
  Position = (416.8, 805.3) = 10 47 47.64 13 58 26.1
  Extent = 0.5" x 0.5", rotation angle = 44 degrees
  Source counts = 28.5 +/- 5.5
  Background counts = 1.5
  Rate = 0.0007 +/- 0.0001

[Fri Sep 30 07:39:19 2011] Off-axis axis estimate = 1.58'
[Fri Sep 30 07:40:39 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 07:40:39 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Fri Sep 30 07:40:39 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.319
[Fri Sep 30 07:40:39 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.40"
[Fri Sep 30 07:40:49 2011] fullrun_ccd7_acisf02934_pi14-548_cl_pass0_src18.ximg exists
[Fri Sep 30 07:40:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02934_pi14-548_cl_pass0_src18.csv
[Fri Sep 30 07:40:49 2011] fullrun_ccd7_acisf02934_pi14-548_cl_pass0_src18_1.ximg exists
[Fri Sep 30 07:40:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02934_pi14-548_cl_pass0_src18.csv
[Fri Sep 30 07:40:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02934_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02934_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 07:40:54 2011] fullrun_ccd7_acisf02934_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Fri Sep 30 07:40:54 2011] fullrun_ccd7_acisf02934_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Sep 30 07:40:54 2011] Fit fullrun_ccd7_acisf02934_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Fri Sep 30 07:41:14 2011] Spatial fit model total counts = 33.992200, observed total counts = 35.000000
[Fri Sep 30 07:41:14 2011] Offset between fit and detection position for source 13 = 0.718269 pixels
[Fri Sep 30 07:41:14 2011] 32.997700 total counts/ 3.171400 bgd. counts: snr = 16.748421
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.718269 pixels
  Position = (417.3, 805.8) = 10 47 47.64 13 58 26.1
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 29.8 +/- 5.7
  Background counts = 3.2
  Rate = 0.0008 +/- 0.0001
[Fri Sep 30 07:41:14 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 07:41:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 07:41:14 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 07:41:14 2011] Source does appear to be extended
[Fri Sep 30 07:41:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 07:41:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 07:41:44 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Fri Sep 30 07:41:44 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.055
[Fri Sep 30 07:41:44 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.47"
[Fri Sep 30 07:41:45 2011] fullrun_ccd7_acisf02934_pi14-548_cl_pass1_src18.ximg exists
[Fri Sep 30 07:41:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02934_pi14-548_cl_pass1_src18.csv
[Fri Sep 30 07:41:45 2011] fullrun_ccd7_acisf02934_pi14-548_cl_pass1_src18_1.ximg exists
[Fri Sep 30 07:41:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02934_pi14-548_cl_pass1_src18.csv
[Fri Sep 30 07:41:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02934_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02934_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 07:41:46 2011] fullrun_ccd7_acisf02934_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Fri Sep 30 07:41:46 2011] fullrun_ccd7_acisf02934_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Sep 30 07:41:46 2011] Fit fullrun_ccd7_acisf02934_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Fri Sep 30 07:41:58 2011] Spatial fit model total counts = 34.062700, observed total counts = 35.000000
[Fri Sep 30 07:41:58 2011] Offset between fit and detection position for source 13 = 0.006358 pixels
[Fri Sep 30 07:41:58 2011] 33.135350 total counts/ 3.358150 bgd. counts: snr = 16.249268
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.006358 pixels
  Position = (417.3, 805.8) = 10 47 47.64 13 58 26.1
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 29.8 +/- 5.8
  Background counts = 3.4
  Rate = 0.0008 +/- 0.0001
[Fri Sep 30 07:41:58 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 07:41:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 07:41:58 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 07:41:58 2011] Source does appear to be extended
[Fri Sep 30 07:41:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 07:45:26 2011] Not overwriting source region fullrun_ccd7_acisf02934_pi14-548_pass1_cl_src13_src.reg
[Fri Sep 30 07:45:26 2011] Extracting stamp from image fullrun_ccd7_acisf02934_pi14-548_cl_sm2.00.img.gz, (396, 784) - (439, 827)
[Fri Sep 30 07:45:26 2011] Writing fullrun_ccd7_acisf02934_pi14-548_pass1_cl_src13.gif
[Fri Sep 30 07:46:38 2011] ../../acisf02934/products/events/fullrun_ccd7_acisf02934_pi14-548_pass1_cl_src13_src.evt and ../../acisf02934/products/events/fullrun_ccd7_acisf02934_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Fri Sep 30 07:46:38 2011] Size of ../../acisf02934/products/events/fullrun_ccd7_acisf02934_pi14-548_pass1_cl_src13_src.evt.gz[events] = 30 counts
[Fri Sep 30 07:46:38 2011] Mean chipx,y = (299.33, 691.53)
[Fri Sep 30 07:46:38 2011] Mean tdetx,y = (4216.33, 2393.53)
[Fri Sep 30 07:46:38 2011] chipx,y range = (279.00-314.00, 672.00-707.00)
[Fri Sep 30 07:46:38 2011] Size of ../../acisf02934/products/events/fullrun_ccd7_acisf02934_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 12 counts
[Fri Sep 30 07:46:38 2011] ../../acisf02934/products/images/fullrun_ccd7_acisf02934_pi14-548_pass1_cl_src13_src.img and ../../acisf02934/products/images/fullrun_ccd7_acisf02934_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Fri Sep 30 07:46:38 2011] ../../acisf02934/products/spectra/fullrun_ccd7_acisf02934_pi14-548_pass1_cl_src13_src.pi and ../../acisf02934/products/spectra/fullrun_ccd7_acisf02934_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Fri Sep 30 07:46:38 2011] Not generating rmf since there are only 29 counts
[Fri Sep 30 07:46:42 2011] ../../acisf02934/products/lightcurves/fullrun_ccd7_acisf02934_pi14-548_pass1_cl_src13_src.lc and ../../acisf02934/products/lightcurves/fullrun_ccd7_acisf02934_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Fri Sep 30 07:47:55 2011] 239.658
[Fri Sep 30 07:48:02 2011] Updating aperture counts using extracted products
[Fri Sep 30 07:48:02 2011] Error reading totcts from fullrun_ccd7_acisf02934_pi14-548_pass1_cl_src13_src.pi.gz
[Fri Sep 30 07:48:02 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 07:48:02 2011] Using photon index=1.80, rate=0.000751, arf fullrun_ccd7_acisf02934_pi14-548_pass1_cl_src13.arf
[Fri Sep 30 07:48:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 07:48:02 2011] Updating source flux to 5e-15
[Fri Sep 30 07:48:23 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting