[Sat Oct 15 00:42:14 2011] Detection parameters:
  Position = (590.6, 634.5) = 10 27 23.99 28 28 36.2
  Extent = 0.5" x 0.5", rotation angle = 14 degrees
  Source counts = 144.4 +/- 12.0
  Background counts = 0.6
  Rate = 0.01 +/- 0.001

[Sat Oct 15 00:42:15 2011] Off-axis axis estimate = 2.71'
[Sat Oct 15 00:43:08 2011] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 00:43:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 00:43:08 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Sat Oct 15 00:43:08 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.912
[Sat Oct 15 00:43:08 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.53"
[Sat Oct 15 00:43:09 2011] fullrun_ccd7_acisf02926_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 15 00:43:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02926_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 00:43:09 2011] fullrun_ccd7_acisf02926_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 15 00:43:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02926_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 00:43:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02926_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02926_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 00:43:09 2011] fullrun_ccd7_acisf02926_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 15 00:43:09 2011] fullrun_ccd7_acisf02926_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 15 00:43:09 2011] Fit fullrun_ccd7_acisf02926_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 15 00:43:14 2011] Spatial fit model total counts = 146.694000, observed total counts = 147.000000
[Sat Oct 15 00:43:14 2011] Offset between fit and detection position for source 8 = 0.691371 pixels
[Sat Oct 15 00:43:14 2011] 147.169100 total counts/ 4.918100 bgd. counts: snr = 64.144090
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.691371 pixels
  Position = (591.1, 634.9) = 10 27 23.99 28 28 36.2
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 142.3 +/- 12.1
  Background counts = 4.9
  Rate = 0.01 +/- 0.001
[Sat Oct 15 00:43:14 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 00:43:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 00:43:14 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 00:43:14 2011] Source does appear to be extended
[Sat Oct 15 00:43:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 00:43:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 00:43:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 00:43:34 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Sat Oct 15 00:43:34 2011] source mask rpix=1.1, npix_max = 10, mask sum = 16, frac = 1.574
[Sat Oct 15 00:43:34 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.54"
[Sat Oct 15 00:43:34 2011] fullrun_ccd7_acisf02926_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 15 00:43:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02926_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 00:43:34 2011] fullrun_ccd7_acisf02926_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 15 00:43:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02926_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 00:43:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02926_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02926_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 00:43:35 2011] fullrun_ccd7_acisf02926_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 15 00:43:35 2011] fullrun_ccd7_acisf02926_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 15 00:43:35 2011] Fit fullrun_ccd7_acisf02926_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 15 00:43:39 2011] Spatial fit model total counts = 162.395000, observed total counts = 147.000000
[Sat Oct 15 00:43:39 2011] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Oct 15 00:43:39 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 00:43:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 00:43:39 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 00:43:39 2011] Source does appear to be extended
[Sat Oct 15 00:43:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 00:45:00 2011] Not overwriting source region fullrun_ccd7_acisf02926_pi14-548_pass1_cl_src8_src.reg
[Sat Oct 15 00:45:00 2011] Extracting stamp from image fullrun_ccd7_acisf02926_pi14-548_cl_sm2.00.img.gz, (566, 610) - (616, 660)
[Sat Oct 15 00:45:00 2011] Writing fullrun_ccd7_acisf02926_pi14-548_pass1_cl_src8.gif
[Sat Oct 15 00:45:01 2011] ../../acisf02926/products/events/fullrun_ccd7_acisf02926_pi14-548_pass1_cl_src8_src.evt and ../../acisf02926/products/events/fullrun_ccd7_acisf02926_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Sat Oct 15 00:45:01 2011] Size of ../../acisf02926/products/events/fullrun_ccd7_acisf02926_pi14-548_pass1_cl_src8_src.evt.gz[events] = 144 counts
[Sat Oct 15 00:45:01 2011] Mean chipx,y = (539.77, 568.63)
[Sat Oct 15 00:45:01 2011] Mean tdetx,y = (4456.77, 2270.63)
[Sat Oct 15 00:45:01 2011] chipx,y range = (524.00-560.00, 552.00-588.00)
[Sat Oct 15 00:45:01 2011] Size of ../../acisf02926/products/events/fullrun_ccd7_acisf02926_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 6 counts
[Sat Oct 15 00:45:01 2011] ../../acisf02926/products/images/fullrun_ccd7_acisf02926_pi14-548_pass1_cl_src8_src.img and ../../acisf02926/products/images/fullrun_ccd7_acisf02926_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Sat Oct 15 00:45:01 2011] ../../acisf02926/products/spectra/fullrun_ccd7_acisf02926_pi14-548_pass1_cl_src8_src.pi and ../../acisf02926/products/spectra/fullrun_ccd7_acisf02926_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Sat Oct 15 00:45:04 2011] ../../acisf02926/products/lightcurves/fullrun_ccd7_acisf02926_pi14-548_pass1_cl_src8_src.lc and ../../acisf02926/products/lightcurves/fullrun_ccd7_acisf02926_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Sat Oct 15 00:45:50 2011] Keeping rmf generated by specextract
[Sat Oct 15 00:45:50 2011] 233.239
[Sat Oct 15 00:45:53 2011] Updating aperture counts using extracted products
[Sat Oct 15 00:45:53 2011] Error reading totcts from fullrun_ccd7_acisf02926_pi14-548_pass1_cl_src8_src.pi.gz
[Sat Oct 15 00:45:53 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 00:45:53 2011] Using photon index=1.80, rate=0.0148, arf fullrun_ccd7_acisf02926_pi14-548_pass1_cl_src8.arf
[Sat Oct 15 00:45:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 00:45:53 2011] Updating source flux to 9.6e-14
[Sat Oct 15 00:45:59 2011] Flag p found in src. 8 procflags, skipping spectral fitting
[Sat Oct 15 00:46:02 2011] Reading fit data from acisf02926/analysis//spectral/fullrun_ccd7_acisf02926_pi14-548_pass1_cl_src8_pl.csv
[Sat Oct 15 00:46:02 2011] Spectral fit parameter nH value = 8.00535e+20
[Sat Oct 15 00:46:02 2011] Spectral fit parameter PhoIndex value = 1.71606
[Sat Oct 15 00:46:02 2011] Failed to get F(0.3-8.0) from acisf02926/analysis//spectral/fullrun_ccd7_acisf02926_pi14-548_pass1_cl_src8_pl.csv, possibly due to different flux energy range selected
[Sat Oct 15 00:46:02 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 00:46:02 2011] Using Nh = 8e+20, photon index=1.72, rate=0.0148, arf fullrun_ccd7_acisf02926_pi14-548_pass1_cl_src8.arf
[Sat Oct 15 00:46:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 00:46:02 2011] Updating source flux to 1.1e-13