[Wed Feb 22 14:26:21 2012] Detection parameters:
  Position = (903.8, 643.1) = 0 42 33.87 41 16 19.5
  Extent = 1.5" x 0.8", rotation angle = 62 degrees
  Source counts = 41.5 +/- 6.6
  Background counts = 2.5
  Rate = 0.008 +/- 0.001

[Wed Feb 22 14:26:21 2012] Off-axis axis estimate = 7.47'
[Wed Feb 22 14:49:41 2012] Using EEF radius (= 2.47 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 14:49:41 2012] Initial guess for spatial extent in simple fitting = 2.47"
[Wed Feb 22 14:49:41 2012] source mask rpix=5.0, npix_max = 121, mask sum = 121, frac = 0.992
[Wed Feb 22 14:49:41 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 2.47"
[Wed Feb 22 16:04:15 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src29.ximg exists
[Wed Feb 22 16:04:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src29.csv
[Wed Feb 22 16:04:15 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src29_1.ximg exists
[Wed Feb 22 16:04:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src29.csv
[Wed Feb 22 16:04:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 16:04:16 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Wed Feb 22 16:04:16 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Wed Feb 22 16:04:16 2012] Fit fullrun_ccd3_acisf02898_pi14-548_cl_pass0_tfrozen_src29 appears to have run properly
[Wed Feb 22 16:42:37 2012] Spatial fit model total counts = 55.895100, observed total counts = 49.000000
[Wed Feb 22 16:42:37 2012] Offset between fit and detection position for source 49 = 0.775111 pixels
[Wed Feb 22 16:42:37 2012] 56.242610 total counts/ 8.791610 bgd. counts: snr = 16.003360
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.775111 pixels
  Position = (904.4, 643.5) = 0 42 33.86 41 16 19.5
  Extent = 1.7" x 1.1", rotation angle = 293
  Source counts = 47.5 +/- 7.5
  Background counts = 8.8
  Rate = 0.01 +/- 0.002
[Wed Feb 22 16:42:37 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 16:42:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 16:42:37 2012] Assessing source extent using major
[Wed Feb 22 16:42:37 2012] Source does appear to be extended
[Wed Feb 22 16:42:37 2012] Computing asymmetry using major and minor axis, asym = 1.61
[Wed Feb 22 16:42:37 2012] Source is asymmetric
[Wed Feb 22 17:02:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 22 17:02:13 2012] Initial guess for spatial extent in simple fitting = 1.39"
[Wed Feb 22 17:02:13 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.102
[Wed Feb 22 17:02:13 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 1.39"
[Wed Feb 22 17:50:58 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src29.ximg exists
[Wed Feb 22 17:50:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src29.csv
[Wed Feb 22 17:50:58 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src29_1.ximg exists
[Wed Feb 22 17:50:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src29.csv
[Wed Feb 22 17:50:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 17:50:58 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass1_tfrozen_src29.ximg exists
[Wed Feb 22 17:50:58 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass1_tfrozen_src29_1.ximg exists
[Wed Feb 22 17:50:58 2012] Fit fullrun_ccd3_acisf02898_pi14-548_cl_pass1_tfrozen_src29 appears to have run properly
[Wed Feb 22 18:30:43 2012] Spatial fit model total counts = 40.477700, observed total counts = 43.000000
[Wed Feb 22 18:30:43 2012] Offset between fit and detection position for source 49 = 1.148168 pixels
[Wed Feb 22 18:30:43 2012] 42.233800 total counts/ 1.592700 bgd. counts: snr = 32.203158
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 1.148168 pixels
  Position = (903.6, 642.7) = 0 42 33.90 41 16 19.1
  Extent = 1.3 (1.0-1.5)", rotation angle = 0
  Source counts = 40.6 +/- 6.5
  Background counts = 1.6
  Rate = 0.008 +/- 0.001
[Wed Feb 22 18:30:43 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 18:30:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 18:30:43 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 18:30:43 2012] Source does appear to be extended
[Wed Feb 22 18:30:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 18:34:15 2012] Writing source region out to fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src49_src.reg
[Wed Feb 22 18:34:15 2012] Extracting stamp from image fullrun_ccd3_acisf02898_pi14-548_cl_sm2.00.img.gz, (844, 583) - (963, 702)
[Wed Feb 22 18:34:15 2012] Writing fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src49.gif
[Wed Feb 22 18:39:03 2012] Size of ../../acisf02898/products/events/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src49_src.evt.gz[events] = 43 counts
[Wed Feb 22 18:39:03 2012] Mean chipx,y = (138.35, 614.35)
[Wed Feb 22 18:39:03 2012] Mean tdetx,y = (4517.65, 3199.35)
[Wed Feb 22 18:39:03 2012] chipx,y range = (116.00-152.00, 599.00-639.00)
[Wed Feb 22 18:39:03 2012] Size of ../../acisf02898/products/events/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src49_bgd.evt.gz[events] = 16 counts
[Wed Feb 22 18:39:04 2012] Not generating rmf since there are only 40 counts
[Wed Feb 22 18:39:04 2012] arf not found, will run specextract
[Wed Feb 22 18:39:06 2012] ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src49_bkg.pi not found
[Wed Feb 22 18:39:06 2012] ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src49.warf not found
[Wed Feb 22 18:39:06 2012] ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src49.wrmf not found
[Wed Feb 22 18:39:06 2012] Removal of ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src49.soff failed
[Wed Feb 22 18:39:06 2012] Failed to rename ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src49_grp.pi to ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src49_src.pi
[Wed Feb 22 18:41:57 2012] No arf file found
[Wed Feb 22 18:42:52 2012] Updating aperture counts using extracted products
[Wed Feb 22 18:42:52 2012] Error reading totcts from fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src49_src.pi
[Wed Feb 22 18:42:52 2012] No arf file for this source, not re-computing flux
[Wed Feb 22 18:42:59 2012] Source 49 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Feb 22 18:43:00 2012] acisf02898/analysis//spectral/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete