[Wed Feb 22 14:26:20 2012] Detection parameters:
  Position = (405.1, 918.4) = 0 42 55.62 41 18 35.3
  Extent = 0.6" x 0.5", rotation angle = 152 degrees
  Source counts = 21.6 +/- 4.7
  Background counts = 0.4
  Rate = 0.004 +/- 0.001

[Wed Feb 22 14:26:21 2012] Off-axis axis estimate = 2.86'
[Wed Feb 22 14:49:41 2012] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 14:49:41 2012] Initial guess for spatial extent in simple fitting = 0.55"
[Wed Feb 22 14:49:41 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.140
[Wed Feb 22 14:49:41 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 0.55"
[Wed Feb 22 16:04:15 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src35.ximg exists
[Wed Feb 22 16:04:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src35.csv
[Wed Feb 22 16:04:15 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src35_1.ximg exists
[Wed Feb 22 16:04:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src35.csv
[Wed Feb 22 16:04:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 16:04:16 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass0_tfrozen_src35.ximg exists
[Wed Feb 22 16:04:16 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass0_tfrozen_src35_1.ximg exists
[Wed Feb 22 16:04:16 2012] Fit fullrun_ccd3_acisf02898_pi14-548_cl_pass0_tfrozen_src35 appears to have run properly
[Wed Feb 22 16:42:37 2012] Spatial fit model total counts = 21.677100, observed total counts = 22.000000
[Wed Feb 22 16:42:37 2012] Offset between fit and detection position for source 36 = 0.834191 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.834191 pixels
  Position = (405.8, 918.8) = 0 42 55.61 41 18 35.2
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 21.6 +/- 4.6
  Background counts = 0.0
  Rate = 0.004 +/- 0.0009
[Wed Feb 22 16:42:37 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 16:42:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 16:42:37 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 16:42:37 2012] Source does appear to be extended
[Wed Feb 22 16:42:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 17:02:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 22 17:02:13 2012] Initial guess for spatial extent in simple fitting = 0.58"
[Wed Feb 22 17:02:13 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.052
[Wed Feb 22 17:02:13 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 0.58"
[Wed Feb 22 17:50:58 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src35.ximg exists
[Wed Feb 22 17:50:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src35.csv
[Wed Feb 22 17:50:58 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src35_1.ximg exists
[Wed Feb 22 17:50:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src35.csv
[Wed Feb 22 17:50:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 17:50:58 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass1_tfrozen_src35.ximg exists
[Wed Feb 22 17:50:58 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass1_tfrozen_src35_1.ximg exists
[Wed Feb 22 17:50:58 2012] Fit fullrun_ccd3_acisf02898_pi14-548_cl_pass1_tfrozen_src35 appears to have run properly
[Wed Feb 22 18:30:43 2012] Spatial fit model total counts = 20.494200, observed total counts = 22.000000
[Wed Feb 22 18:30:43 2012] Offset between fit and detection position for source 36 = 0.042569 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.042569 pixels
  Position = (405.8, 918.9) = 0 42 55.61 41 18 35.3
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 20.3 +/- 4.5
  Background counts = 0.0
  Rate = 0.004 +/- 0.0009
[Wed Feb 22 18:30:43 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 18:30:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 18:30:43 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 18:30:43 2012] Source does appear to be extended
[Wed Feb 22 18:30:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 18:34:15 2012] Writing source region out to fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src36_src.reg
[Wed Feb 22 18:34:15 2012] Extracting stamp from image fullrun_ccd3_acisf02898_pi14-548_cl_sm2.00.img.gz, (379, 892) - (433, 946)
[Wed Feb 22 18:34:15 2012] Writing fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src36.gif
[Wed Feb 22 18:40:03 2012] Size of ../../acisf02898/products/events/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src36_src.evt.gz[events] = 22 counts
[Wed Feb 22 18:40:03 2012] Mean chipx,y = (624.77, 911.27)
[Wed Feb 22 18:40:03 2012] Mean tdetx,y = (4220.73, 3685.77)
[Wed Feb 22 18:40:03 2012] chipx,y range = (611.00-647.00, 892.00-924.00)
[Wed Feb 22 18:40:03 2012] Size of ../../acisf02898/products/events/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 8 counts
[Wed Feb 22 18:40:04 2012] Not generating rmf since there are only 20 counts
[Wed Feb 22 18:40:04 2012] arf not found, will run specextract
[Wed Feb 22 18:40:06 2012] ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src36_bkg.pi not found
[Wed Feb 22 18:40:06 2012] ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src36.warf not found
[Wed Feb 22 18:40:06 2012] ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src36.wrmf not found
[Wed Feb 22 18:40:06 2012] Removal of ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src36.soff failed
[Wed Feb 22 18:40:06 2012] Failed to rename ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src36_grp.pi to ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src36_src.pi
[Wed Feb 22 18:41:57 2012] No arf file found
[Wed Feb 22 18:42:52 2012] Updating aperture counts using extracted products
[Wed Feb 22 18:42:52 2012] Error reading totcts from fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src36_src.pi
[Wed Feb 22 18:42:52 2012] No arf file for this source, not re-computing flux
[Wed Feb 22 18:42:59 2012] Source 36 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Feb 22 18:43:00 2012] acisf02898/analysis//spectral/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete