[Wed Feb 22 14:26:19 2012] Detection parameters:
  Position = (343.9, 539.8) = 0 42 58.31 41 15 29.0
  Extent = 0.7" x 0.5", rotation angle = 44 degrees
  Source counts = 81.2 +/- 9.1
  Background counts = 0.8
  Rate = 0.02 +/- 0.002

[Wed Feb 22 14:26:21 2012] Off-axis axis estimate = 4.42'
[Wed Feb 22 14:49:41 2012] Using EEF radius (= 0.96 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 14:49:41 2012] Initial guess for spatial extent in simple fitting = 0.96"
[Wed Feb 22 14:49:41 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.033
[Wed Feb 22 14:49:41 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 0.96"
[Wed Feb 22 16:04:15 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src21.ximg exists
[Wed Feb 22 16:04:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src21.csv
[Wed Feb 22 16:04:15 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src21_1.ximg exists
[Wed Feb 22 16:04:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src21.csv
[Wed Feb 22 16:04:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 16:04:16 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Wed Feb 22 16:04:16 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Wed Feb 22 16:04:16 2012] Fit fullrun_ccd3_acisf02898_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Wed Feb 22 16:42:37 2012] Spatial fit model total counts = 81.431800, observed total counts = 82.000000
[Wed Feb 22 16:42:37 2012] Offset between fit and detection position for source 19 = 0.824649 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.824649 pixels
  Position = (344.4, 540.4) = 0 42 58.30 41 15 29.0
  Extent = 0.8 (0.7-0.8)", rotation angle = 0
  Source counts = 81.1 +/- 9.0
  Background counts = 0.0
  Rate = 0.02 +/- 0.002
[Wed Feb 22 16:42:37 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 16:42:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 16:42:37 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 16:42:37 2012] Source does appear to be extended
[Wed Feb 22 16:42:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 17:02:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 22 17:02:13 2012] Initial guess for spatial extent in simple fitting = 0.76"
[Wed Feb 22 17:02:13 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.964
[Wed Feb 22 17:02:13 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 0.76"
[Wed Feb 22 17:50:58 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src21.ximg exists
[Wed Feb 22 17:50:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src21.csv
[Wed Feb 22 17:50:58 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src21_1.ximg exists
[Wed Feb 22 17:50:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src21.csv
[Wed Feb 22 17:50:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 17:50:58 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Wed Feb 22 17:50:58 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Wed Feb 22 17:50:58 2012] Fit fullrun_ccd3_acisf02898_pi14-548_cl_pass1_tfrozen_src21 appears to have run properly
[Wed Feb 22 18:30:43 2012] Spatial fit model total counts = 80.735700, observed total counts = 82.000000
[Wed Feb 22 18:30:43 2012] Offset between fit and detection position for source 19 = 0.007691 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.007691 pixels
  Position = (344.4, 540.4) = 0 42 58.30 41 15 29.0
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 80.4 +/- 9.0
  Background counts = 0.0
  Rate = 0.02 +/- 0.002
[Wed Feb 22 18:30:43 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 18:30:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 18:30:43 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 18:30:43 2012] Source does appear to be extended
[Wed Feb 22 18:30:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 18:34:14 2012] Writing source region out to fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src19_src.reg
[Wed Feb 22 18:34:14 2012] Extracting stamp from image fullrun_ccd3_acisf02898_pi14-548_cl_sm2.00.img.gz, (309, 505) - (380, 576)
[Wed Feb 22 18:34:14 2012] Writing fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src19.gif
[Wed Feb 22 18:37:42 2012] Size of ../../acisf02898/products/events/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src19_src.evt.gz[events] = 81 counts
[Wed Feb 22 18:37:42 2012] Mean chipx,y = (698.53, 528.27)
[Wed Feb 22 18:37:42 2012] Mean tdetx,y = (4603.73, 3759.53)
[Wed Feb 22 18:37:42 2012] chipx,y range = (681.00-716.00, 511.00-548.00)
[Wed Feb 22 18:37:42 2012] Size of ../../acisf02898/products/events/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 8 counts
[Wed Feb 22 18:37:43 2012] Not generating rmf since there are only 80 counts
[Wed Feb 22 18:37:43 2012] arf not found, will run specextract
[Wed Feb 22 18:37:44 2012] ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src19_bkg.pi not found
[Wed Feb 22 18:37:44 2012] ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src19.warf not found
[Wed Feb 22 18:37:44 2012] ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src19.wrmf not found
[Wed Feb 22 18:37:44 2012] Removal of ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src19.soff failed
[Wed Feb 22 18:37:44 2012] Failed to rename ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src19_grp.pi to ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src19_src.pi
[Wed Feb 22 18:41:57 2012] No arf file found
[Wed Feb 22 18:42:52 2012] Updating aperture counts using extracted products
[Wed Feb 22 18:42:52 2012] Error reading totcts from fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src19_src.pi
[Wed Feb 22 18:42:52 2012] No arf file for this source, not re-computing flux
[Wed Feb 22 18:42:59 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Feb 22 18:43:00 2012] acisf02898/analysis//spectral/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete