[Wed Feb 22 14:26:19 2012] Detection parameters:
  Position = (943.0, 265.0) = 0 42 32.19 41 13 13.5
  Extent = 2.7" x 1.6", rotation angle = 49 degrees
  Source counts = 158.9 +/- 13.4
  Background counts = 20.1
  Rate = 0.03 +/- 0.003

[Wed Feb 22 14:26:21 2012] Off-axis axis estimate = 9.39'
[Wed Feb 22 14:49:41 2012] Using EEF radius (= 3.90 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 14:49:41 2012] Initial guess for spatial extent in simple fitting = 3.90"
[Wed Feb 22 14:49:41 2012] source mask rpix=7.9, npix_max = 283, mask sum = 256, frac = 0.902
[Wed Feb 22 14:49:41 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 3.90"
[Wed Feb 22 16:04:15 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src13.ximg exists
[Wed Feb 22 16:04:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src13.csv
[Wed Feb 22 16:04:15 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src13_1.ximg exists
[Wed Feb 22 16:04:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src13.csv
[Wed Feb 22 16:04:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02898_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 16:04:16 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Wed Feb 22 16:04:16 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Feb 22 16:04:16 2012] Fit fullrun_ccd3_acisf02898_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Wed Feb 22 16:42:37 2012] Spatial fit model total counts = 174.795000, observed total counts = 176.000000
[Wed Feb 22 16:42:37 2012] Offset between fit and detection position for source 16 = 2.736389 pixels
[Wed Feb 22 16:42:37 2012] 174.134600 total counts/ 43.006600 bgd. counts: snr = 19.995298
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 2.736389 pixels
  Position = (944.7, 267.1) = 0 42 32.13 41 13 14.3
  Extent = 3.2 (2.5-3.9)", rotation angle = 0
  Source counts = 131.1 +/- 13.2
  Background counts = 43.0
  Rate = 0.03 +/- 0.003
[Wed Feb 22 16:42:37 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 16:42:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 16:42:37 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 16:42:37 2012] Source does appear to be extended
[Wed Feb 22 16:42:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 17:02:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 22 17:02:13 2012] Initial guess for spatial extent in simple fitting = 3.16"
[Wed Feb 22 17:02:13 2012] source mask rpix=6.4, npix_max = 191, mask sum = 196, frac = 1.021
[Wed Feb 22 17:02:13 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 3.16"
[Wed Feb 22 17:50:58 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src13.ximg exists
[Wed Feb 22 17:50:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src13.csv
[Wed Feb 22 17:50:58 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src13_1.ximg exists
[Wed Feb 22 17:50:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src13.csv
[Wed Feb 22 17:50:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02898_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 17:50:58 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Wed Feb 22 17:50:58 2012] fullrun_ccd3_acisf02898_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Feb 22 17:50:58 2012] Fit fullrun_ccd3_acisf02898_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Wed Feb 22 18:30:43 2012] Spatial fit model total counts = 168.011000, observed total counts = 169.000000
[Wed Feb 22 18:30:43 2012] Offset between fit and detection position for source 16 = 1.066442 pixels
[Wed Feb 22 18:30:43 2012] 166.542100 total counts/ 64.150100 bgd. counts: snr = 12.784018
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.066442 pixels
  Position = (945.6, 267.7) = 0 42 32.09 41 13 14.5
  Extent = 2.5 (1.9-3.0)", rotation angle = 0
  Source counts = 102.4 +/- 12.9
  Background counts = 64.2
  Rate = 0.02 +/- 0.003
[Wed Feb 22 18:30:43 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 18:30:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 18:30:43 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 18:30:43 2012] Source does appear to be extended
[Wed Feb 22 18:30:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 18:34:14 2012] Writing source region out to fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src16_src.reg
[Wed Feb 22 18:34:14 2012] Extracting stamp from image fullrun_ccd3_acisf02898_pi14-548_cl_sm2.00.img.gz, (829, 151) - (1062, 384)
[Wed Feb 22 18:34:14 2012] Writing fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src16.gif
[Wed Feb 22 18:36:21 2012] Size of ../../acisf02898/products/events/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src16_src.evt.gz[events] = 159 counts
[Wed Feb 22 18:36:21 2012] Mean chipx,y = (104.04, 239.50)
[Wed Feb 22 18:36:21 2012] Mean tdetx,y = (4892.50, 3165.04)
[Wed Feb 22 18:36:21 2012] chipx,y range = (70.00-134.00, 209.00-270.00)
[Wed Feb 22 18:36:21 2012] Size of ../../acisf02898/products/events/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 50 counts
[Wed Feb 22 18:36:22 2012] rmf not found, will run specextract
[Wed Feb 22 18:36:22 2012] arf not found, will run specextract
[Wed Feb 22 18:36:24 2012] ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src16_bkg.pi not found
[Wed Feb 22 18:36:24 2012] ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src16.warf not found
[Wed Feb 22 18:36:24 2012] ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src16.wrmf not found
[Wed Feb 22 18:36:24 2012] Removal of ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src16.soff failed
[Wed Feb 22 18:36:24 2012] Failed to rename ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src16_grp.pi to ../../acisf02898/products/spectra/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src16_src.pi
[Wed Feb 22 18:41:57 2012] No arf file found
[Wed Feb 22 18:42:52 2012] Updating aperture counts using extracted products
[Wed Feb 22 18:42:52 2012] Error reading totcts from fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src16_src.pi
[Wed Feb 22 18:42:52 2012] No arf file for this source, not re-computing flux
[Wed Feb 22 18:42:59 2012] Source 16 has no response, skipping
[Wed Feb 22 18:43:00 2012] acisf02898/analysis//spectral/fullrun_ccd3_acisf02898_pi14-548_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete