[Mon Jan 23 10:56:32 2012] Detection parameters:
  Position = (411.3, 373.4) = 0 42 49.24 41 18 16.0
  Extent = 0.7" x 0.5", rotation angle = 157 degrees
  Source counts = 38.4 +/- 6.2
  Background counts = 0.6
  Rate = 0.008 +/- 0.001

[Mon Jan 23 10:56:33 2012] Off-axis axis estimate = 3.88'
[Mon Jan 23 11:43:13 2012] Using EEF radius (= 0.80 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 11:43:13 2012] Initial guess for spatial extent in simple fitting = 0.80"
[Mon Jan 23 11:43:13 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.115
[Mon Jan 23 11:43:13 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 0.80"
[Mon Jan 23 12:07:12 2012] fullrun_ccd1_acisf02897_pi14-548_cl_pass0_src11.ximg exists
[Mon Jan 23 12:07:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02897_pi14-548_cl_pass0_src11.csv
[Mon Jan 23 12:07:12 2012] fullrun_ccd1_acisf02897_pi14-548_cl_pass0_src11_1.ximg exists
[Mon Jan 23 12:07:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02897_pi14-548_cl_pass0_src11.csv
[Mon Jan 23 12:07:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf02897_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf02897_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 12:07:13 2012] fullrun_ccd1_acisf02897_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Mon Jan 23 12:07:13 2012] fullrun_ccd1_acisf02897_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Jan 23 12:07:13 2012] Fit fullrun_ccd1_acisf02897_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Mon Jan 23 12:34:45 2012] Spatial fit model total counts = 42.997400, observed total counts = 43.000000
[Mon Jan 23 12:34:45 2012] Offset between fit and detection position for source 10 = 0.733191 pixels
[Mon Jan 23 12:34:45 2012] 43.429760 total counts/ 6.812260 bgd. counts: snr = 14.029529
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.733191 pixels
  Position = (411.9, 373.8) = 0 42 49.24 41 18 16.0
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 36.6 +/- 6.6
  Background counts = 6.8
  Rate = 0.007 +/- 0.001
[Mon Jan 23 12:34:45 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 12:34:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 12:34:45 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 12:34:45 2012] Source does appear to be extended
[Mon Jan 23 12:34:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 13:20:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 13:20:30 2012] Initial guess for spatial extent in simple fitting = 0.70"
[Mon Jan 23 13:20:30 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.082
[Mon Jan 23 13:20:30 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 0.70"
[Mon Jan 23 13:39:36 2012] fullrun_ccd1_acisf02897_pi14-548_cl_pass1_src11.ximg exists
[Mon Jan 23 13:39:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02897_pi14-548_cl_pass1_src11.csv
[Mon Jan 23 13:39:36 2012] fullrun_ccd1_acisf02897_pi14-548_cl_pass1_src11_1.ximg exists
[Mon Jan 23 13:39:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02897_pi14-548_cl_pass1_src11.csv
[Mon Jan 23 13:39:36 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf02897_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf02897_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 13:39:36 2012] fullrun_ccd1_acisf02897_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Mon Jan 23 13:39:36 2012] fullrun_ccd1_acisf02897_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Jan 23 13:39:36 2012] Fit fullrun_ccd1_acisf02897_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Jan 23 14:07:38 2012] Spatial fit model total counts = 42.999400, observed total counts = 43.000000
[Mon Jan 23 14:07:38 2012] Offset between fit and detection position for source 10 = 0.025733 pixels
[Mon Jan 23 14:07:38 2012] 43.084940 total counts/ 6.037840 bgd. counts: snr = 15.076947
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.025733 pixels
  Position = (411.9, 373.8) = 0 42 49.24 41 18 16.0
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 37.0 +/- 6.6
  Background counts = 6.0
  Rate = 0.008 +/- 0.001
[Mon Jan 23 14:07:38 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 14:07:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 14:07:38 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 14:07:38 2012] Source does appear to be extended
[Mon Jan 23 14:07:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 14:13:16 2012] Writing source region out to fullrun_ccd1_acisf02897_pi14-548_pass1_cl_src10_src.reg
[Mon Jan 23 14:13:16 2012] Extracting stamp from image fullrun_ccd1_acisf02897_pi14-548_cl_sm2.00.img.gz, (379, 341) - (444, 406)
[Mon Jan 23 14:13:16 2012] Writing fullrun_ccd1_acisf02897_pi14-548_pass1_cl_src10.gif
[Mon Jan 23 14:15:05 2012] Size of ../../acisf02897/products/events/fullrun_ccd1_acisf02897_pi14-548_pass1_cl_src10_src.evt.gz[events] = 40 counts
[Mon Jan 23 14:15:05 2012] Mean chipx,y = (379.07, 871.00)
[Mon Jan 23 14:15:05 2012] Mean tdetx,y = (4261.00, 4486.07)
[Mon Jan 23 14:15:05 2012] chipx,y range = (363.00-396.00, 852.00-886.00)
[Mon Jan 23 14:15:05 2012] Size of ../../acisf02897/products/events/fullrun_ccd1_acisf02897_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 4 counts
[Mon Jan 23 14:15:06 2012] Not generating rmf since there are only 37 counts
[Mon Jan 23 14:15:06 2012] arf not found, will run specextract
[Mon Jan 23 14:15:07 2012] ../../acisf02897/products/spectra/fullrun_ccd1_acisf02897_pi14-548_pass1_cl_src10_bkg.pi not found
[Mon Jan 23 14:15:07 2012] ../../acisf02897/products/spectra/fullrun_ccd1_acisf02897_pi14-548_pass1_cl_src10.warf not found
[Mon Jan 23 14:15:07 2012] ../../acisf02897/products/spectra/fullrun_ccd1_acisf02897_pi14-548_pass1_cl_src10.wrmf not found
[Mon Jan 23 14:15:07 2012] Removal of ../../acisf02897/products/spectra/fullrun_ccd1_acisf02897_pi14-548_pass1_cl_src10.soff failed
[Mon Jan 23 14:15:07 2012] Failed to rename ../../acisf02897/products/spectra/fullrun_ccd1_acisf02897_pi14-548_pass1_cl_src10_grp.pi to ../../acisf02897/products/spectra/fullrun_ccd1_acisf02897_pi14-548_pass1_cl_src10_src.pi
[Mon Jan 23 14:17:10 2012] No arf file found
[Mon Jan 23 14:20:51 2012] Updating aperture counts using extracted products
[Mon Jan 23 14:20:51 2012] Error reading totcts from fullrun_ccd1_acisf02897_pi14-548_pass1_cl_src10_src.pi
[Mon Jan 23 14:20:51 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 14:20:55 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jan 23 14:20:56 2012] acisf02897/analysis//spectral/fullrun_ccd1_acisf02897_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete