[Thu Oct 20 18:54:50 2011] Detection parameters:
  Position = (270.1, 907.3) = 1 25 34.44 1 54 30.3
  Extent = 2.1" x 1.6", rotation angle = 54 degrees
  Source counts = 106.8 +/- 11.0
  Background counts = 13.2
  Rate = 0.003 +/- 0.0003

[Thu Oct 20 18:54:52 2011] Off-axis axis estimate = 7.83'
[Thu Oct 20 18:55:41 2011] Using EEF radius (= 2.71 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 18:55:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 18:55:41 2011] Initial guess for spatial extent in simple fitting = 2.71"
[Thu Oct 20 18:55:41 2011] source mask rpix=5.5, npix_max = 144, mask sum = 144, frac = 0.996
[Thu Oct 20 18:55:41 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.71"
[Thu Oct 20 18:55:42 2011] fullrun_ccd6_acisf02880_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 20 18:55:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02880_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 18:55:42 2011] fullrun_ccd6_acisf02880_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 20 18:55:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02880_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 18:55:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02880_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02880_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 18:55:42 2011] fullrun_ccd6_acisf02880_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 20 18:55:42 2011] fullrun_ccd6_acisf02880_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 20 18:55:42 2011] Fit fullrun_ccd6_acisf02880_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 20 18:55:49 2011] Spatial fit model total counts = 228.054000, observed total counts = 228.000000
[Thu Oct 20 18:55:49 2011] Offset between fit and detection position for source 1 = 4.286543 pixels
[Thu Oct 20 18:55:49 2011] 228.089900 total counts/ 26.342900 bgd. counts: snr = 39.307488
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.286543 pixels
  Position = (269.7, 911.6) = 1 25 34.47 1 54 32.1
  Extent = 3.6 (3.2-4.0)", rotation angle = 0
  Source counts = 201.7 +/- 15.1
  Background counts = 26.3
  Rate = 0.005 +/- 0.0004
[Thu Oct 20 18:55:49 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 18:55:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 18:55:49 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 18:55:49 2011] Source does appear to be extended
[Thu Oct 20 18:55:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 18:56:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 18:56:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 18:56:05 2011] Initial guess for spatial extent in simple fitting = 3.55"
[Thu Oct 20 18:56:05 2011] source mask rpix=7.2, npix_max = 238, mask sum = 225, frac = 0.944
[Thu Oct 20 18:56:05 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.55"
[Thu Oct 20 18:56:05 2011] fullrun_ccd6_acisf02880_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 20 18:56:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02880_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 18:56:05 2011] fullrun_ccd6_acisf02880_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 20 18:56:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02880_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 18:56:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02880_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02880_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 18:56:05 2011] fullrun_ccd6_acisf02880_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 20 18:56:05 2011] fullrun_ccd6_acisf02880_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 20 18:56:05 2011] Fit fullrun_ccd6_acisf02880_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 20 18:56:14 2011] Spatial fit model total counts = 248.777000, observed total counts = 248.000000
[Thu Oct 20 18:56:14 2011] Offset between fit and detection position for source 1 = 0.312697 pixels
[Thu Oct 20 18:56:14 2011] 248.566200 total counts/ 41.988200 bgd. counts: snr = 31.880156
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.312697 pixels
  Position = (269.9, 911.4) = 1 25 34.47 1 54 32.0
  Extent = 3.6 (3.3-4.0)", rotation angle = 0
  Source counts = 206.6 +/- 15.8
  Background counts = 42.0
  Rate = 0.005 +/- 0.0004
[Thu Oct 20 18:56:14 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 18:56:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 18:56:14 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 18:56:14 2011] Source does appear to be extended
[Thu Oct 20 18:56:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 18:56:51 2011] Not overwriting source region fullrun_ccd6_acisf02880_pi14-548_pass1_cl_src1_src.reg
[Thu Oct 20 18:56:51 2011] Extracting stamp from image fullrun_ccd6_acisf02880_pi14-548_cl_sm2.00.img.gz, (104, 746) - (436, 1077)
[Thu Oct 20 18:56:51 2011] Writing fullrun_ccd6_acisf02880_pi14-548_pass1_cl_src1.gif
[Thu Oct 20 18:56:53 2011] ../../acisf02880/products/events/fullrun_ccd6_acisf02880_pi14-548_pass1_cl_src1_src.evt and ../../acisf02880/products/events/fullrun_ccd6_acisf02880_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Oct 20 18:56:53 2011] Size of ../../acisf02880/products/events/fullrun_ccd6_acisf02880_pi14-548_pass1_cl_src1_src.evt.gz[events] = 235 counts
[Thu Oct 20 18:56:53 2011] Mean chipx,y = (411.68, 972.71)
[Thu Oct 20 18:56:53 2011] Mean tdetx,y = (3286.68, 2674.71)
[Thu Oct 20 18:56:53 2011] chipx,y range = (376.00-446.00, 933.00-1011.00)
[Thu Oct 20 18:56:53 2011] Size of ../../acisf02880/products/events/fullrun_ccd6_acisf02880_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 219 counts
[Thu Oct 20 18:56:53 2011] ../../acisf02880/products/images/fullrun_ccd6_acisf02880_pi14-548_pass1_cl_src1_src.img and ../../acisf02880/products/images/fullrun_ccd6_acisf02880_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Oct 20 18:56:53 2011] ../../acisf02880/products/spectra/fullrun_ccd6_acisf02880_pi14-548_pass1_cl_src1_src.pi and ../../acisf02880/products/spectra/fullrun_ccd6_acisf02880_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Oct 20 18:56:56 2011] ../../acisf02880/products/lightcurves/fullrun_ccd6_acisf02880_pi14-548_pass1_cl_src1_src.lc and ../../acisf02880/products/lightcurves/fullrun_ccd6_acisf02880_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Oct 20 18:57:48 2011] Keeping rmf generated by specextract
[Thu Oct 20 18:57:48 2011] 178.931
[Thu Oct 20 18:58:32 2011] Updating aperture counts using extracted products
[Thu Oct 20 18:58:32 2011] Error reading totcts from fullrun_ccd6_acisf02880_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Oct 20 18:58:32 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 18:58:32 2011] Using photon index=1.80, rate=0.00549, arf fullrun_ccd6_acisf02880_pi14-548_pass1_cl_src1.arf
[Thu Oct 20 18:58:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 18:58:32 2011] Updating source flux to 6.5e-14
[Thu Oct 20 18:58:43 2011] Reading fit data from acisf02880/analysis//spectral/fullrun_ccd6_acisf02880_pi14-548_pass1_cl_src1_pl.csv
[Thu Oct 20 18:58:43 2011] Spectral fit parameter nH value = 3.1073e+13
[Thu Oct 20 18:58:43 2011] Spectral fit parameter PhoIndex value = 1.96673
[Thu Oct 20 18:58:43 2011] Failed to get F(0.3-8.0) from acisf02880/analysis//spectral/fullrun_ccd6_acisf02880_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Oct 20 18:58:43 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 18:58:43 2011] Using Nh = 3.1e+13, photon index=1.97, rate=0.00549, arf fullrun_ccd6_acisf02880_pi14-548_pass1_cl_src1.arf
[Thu Oct 20 18:58:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 18:58:43 2011] Updating source flux to 6.5e-14