[Sat Oct 29 04:47:03 2011] Detection parameters:
  Position = (1227.2, 946.2) = 5 34 58.37 -69 13 7.9
  Extent = 0.9" x 0.6", rotation angle = 45 degrees
  Source counts = 52.6 +/- 7.5
  Background counts = 4.4
  Rate = 0.001 +/- 0.0002

[Sat Oct 29 04:47:06 2011] Off-axis axis estimate = 3.86'
[Sat Oct 29 04:48:05 2011] Using EEF radius (= 0.79 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 04:48:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 04:48:05 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Sat Oct 29 04:48:05 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.906
[Sat Oct 29 04:48:05 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.79"
[Sat Oct 29 04:48:06 2011] fullrun_ccd7_acisf02832_pi14-548_cl_pass0_src5.ximg exists
[Sat Oct 29 04:48:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02832_pi14-548_cl_pass0_src5.csv
[Sat Oct 29 04:48:06 2011] fullrun_ccd7_acisf02832_pi14-548_cl_pass0_src5_1.ximg exists
[Sat Oct 29 04:48:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02832_pi14-548_cl_pass0_src5.csv
[Sat Oct 29 04:48:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02832_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02832_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 04:48:07 2011] fullrun_ccd7_acisf02832_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sat Oct 29 04:48:07 2011] fullrun_ccd7_acisf02832_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Oct 29 04:48:07 2011] Fit fullrun_ccd7_acisf02832_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Oct 29 04:48:16 2011] Spatial fit model total counts = 59.492600, observed total counts = 60.000000
[Sat Oct 29 04:48:16 2011] Offset between fit and detection position for source 4 = 0.824712 pixels
[Sat Oct 29 04:48:16 2011] 59.390810 total counts/ 7.816310 bgd. counts: snr = 18.447356
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.824712 pixels
  Position = (1227.8, 946.7) = 5 34 58.36 -69 13 7.8
  Extent = 0.9 (0.8-1.2)", rotation angle = 0
  Source counts = 51.6 +/- 7.7
  Background counts = 7.8
  Rate = 0.001 +/- 0.0002
[Sat Oct 29 04:48:17 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 04:48:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 04:48:17 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 04:48:17 2011] Source does appear to be extended
[Sat Oct 29 04:48:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 04:48:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 04:48:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 04:48:36 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Sat Oct 29 04:48:36 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.089
[Sat Oct 29 04:48:36 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.93"
[Sat Oct 29 04:48:37 2011] fullrun_ccd7_acisf02832_pi14-548_cl_pass1_src5.ximg exists
[Sat Oct 29 04:48:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02832_pi14-548_cl_pass1_src5.csv
[Sat Oct 29 04:48:37 2011] fullrun_ccd7_acisf02832_pi14-548_cl_pass1_src5_1.ximg exists
[Sat Oct 29 04:48:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02832_pi14-548_cl_pass1_src5.csv
[Sat Oct 29 04:48:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02832_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02832_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 04:48:37 2011] fullrun_ccd7_acisf02832_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sat Oct 29 04:48:37 2011] fullrun_ccd7_acisf02832_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Oct 29 04:48:37 2011] Fit fullrun_ccd7_acisf02832_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Oct 29 04:48:46 2011] Spatial fit model total counts = 60.999700, observed total counts = 61.000000
[Sat Oct 29 04:48:46 2011] Offset between fit and detection position for source 4 = 0.064252 pixels
[Sat Oct 29 04:48:46 2011] 60.588020 total counts/ 9.292820 bgd. counts: snr = 16.826855
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.064252 pixels
  Position = (1227.9, 946.7) = 5 34 58.35 -69 13 7.9
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 51.3 +/- 7.8
  Background counts = 9.3
  Rate = 0.001 +/- 0.0002
[Sat Oct 29 04:48:46 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 04:48:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 04:48:46 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 04:48:46 2011] Source does appear to be extended
[Sat Oct 29 04:48:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 04:50:02 2011] Not overwriting source region fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src4_src.reg
[Sat Oct 29 04:50:02 2011] Extracting stamp from image fullrun_ccd7_acisf02832_pi14-548_cl_sm2.00.img.gz, (1186, 905) - (1270, 989)
[Sat Oct 29 04:50:03 2011] Writing fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src4.gif
[Sat Oct 29 04:50:16 2011] ../../acisf02832/products/events/fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src4_src.evt and ../../acisf02832/products/events/fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Sat Oct 29 04:50:17 2011] Size of ../../acisf02832/products/events/fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src4_src.evt.gz[events] = 58 counts
[Sat Oct 29 04:50:17 2011] Mean chipx,y = (192.97, 988.17)
[Sat Oct 29 04:50:17 2011] Mean tdetx,y = (4109.97, 2690.17)
[Sat Oct 29 04:50:17 2011] chipx,y range = (174.00-216.00, 969.00-1008.00)
[Sat Oct 29 04:50:17 2011] Size of ../../acisf02832/products/events/fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 71 counts
[Sat Oct 29 04:50:17 2011] ../../acisf02832/products/images/fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src4_src.img and ../../acisf02832/products/images/fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Sat Oct 29 04:50:17 2011] ../../acisf02832/products/spectra/fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src4_src.pi and ../../acisf02832/products/spectra/fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Sat Oct 29 04:50:17 2011] Not generating rmf since there are only 51 counts
[Sat Oct 29 04:50:20 2011] ../../acisf02832/products/lightcurves/fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src4_src.lc and ../../acisf02832/products/lightcurves/fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Sat Oct 29 04:51:28 2011] 224.135
[Sat Oct 29 04:51:31 2011] Updating aperture counts using extracted products
[Sat Oct 29 04:51:31 2011] Error reading totcts from fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src4_src.pi.gz
[Sat Oct 29 04:51:32 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 04:51:32 2011] Using photon index=1.80, rate=0.00116, arf fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src4.arf
[Sat Oct 29 04:51:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 04:51:32 2011] Updating source flux to 1e-14
[Sat Oct 29 04:51:38 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting