[Sat Oct 29 04:47:03 2011] Detection parameters:
  Position = (1122.4, 909.2) = 5 35 8.05 -69 13 26.1
  Extent = 0.6" x 0.5", rotation angle = 63 degrees
  Source counts = 24.7 +/- 5.2
  Background counts = 2.3
  Rate = 0.0006 +/- 0.0001

[Sat Oct 29 04:47:06 2011] Off-axis axis estimate = 3.19'
[Sat Oct 29 04:48:05 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 04:48:05 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Sat Oct 29 04:48:05 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.970
[Sat Oct 29 04:48:05 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.62"
[Sat Oct 29 04:48:07 2011] fullrun_ccd7_acisf02832_pi14-548_cl_pass0_src19.ximg exists
[Sat Oct 29 04:48:07 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf02832_pi14-548_cl_pass0_src19.csv
[Sat Oct 29 04:48:07 2011] fullrun_ccd7_acisf02832_pi14-548_cl_pass0_src19_1.ximg exists
[Sat Oct 29 04:48:07 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf02832_pi14-548_cl_pass0_src19.csv
[Sat Oct 29 04:48:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02832_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02832_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 04:48:07 2011] fullrun_ccd7_acisf02832_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Sat Oct 29 04:48:07 2011] fullrun_ccd7_acisf02832_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Oct 29 04:48:07 2011] Fit fullrun_ccd7_acisf02832_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Oct 29 04:48:16 2011] Spatial fit model total counts = 30.989700, observed total counts = 31.000000
[Sat Oct 29 04:48:16 2011] Offset between fit and detection position for source 14 = 0.867390 pixels
[Sat Oct 29 04:48:16 2011] 30.763060 total counts/ 6.182460 bgd. counts: snr = 9.885800
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.867390 pixels
  Position = (1122.9, 909.9) = 5 35 8.05 -69 13 26.0
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 24.6 +/- 5.5
  Background counts = 6.2
  Rate = 0.0006 +/- 0.0001
[Sat Oct 29 04:48:17 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 04:48:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 04:48:17 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 04:48:17 2011] Source does appear to be extended
[Sat Oct 29 04:48:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 04:48:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 04:48:36 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Sat Oct 29 04:48:36 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.286
[Sat Oct 29 04:48:36 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.62"
[Sat Oct 29 04:48:37 2011] fullrun_ccd7_acisf02832_pi14-548_cl_pass1_src18.ximg exists
[Sat Oct 29 04:48:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02832_pi14-548_cl_pass1_src18.csv
[Sat Oct 29 04:48:37 2011] fullrun_ccd7_acisf02832_pi14-548_cl_pass1_src18_1.ximg exists
[Sat Oct 29 04:48:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02832_pi14-548_cl_pass1_src18.csv
[Sat Oct 29 04:48:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02832_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02832_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 04:48:38 2011] fullrun_ccd7_acisf02832_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Sat Oct 29 04:48:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02832_pi14-548_cl_pass1_tfrozen_src18.csv
[Sat Oct 29 04:48:38 2011] fullrun_ccd7_acisf02832_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Sat Oct 29 04:48:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02832_pi14-548_cl_pass1_tfrozen_src18.csv
[Sat Oct 29 04:48:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02832_pi14-548_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02832_pi14-548_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 04:48:46 2011] Spatial fit model total counts = 27.417800, observed total counts = 32.000000
[Sat Oct 29 04:48:46 2011] Offset between fit and detection position for source 14 = 0.059383 pixels
[Sat Oct 29 04:48:46 2011] 27.315716 total counts/ 0.147316 bgd. counts: snr = 70.784652
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.059383 pixels
  Position = (1122.9, 909.9) = 5 35 8.05 -69 13 26.0
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 27.2 +/- 5.2
  Background counts = 0.1
  Rate = 0.0006 +/- 0.0001
[Sat Oct 29 04:48:46 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 04:48:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 04:48:46 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 04:48:46 2011] Source does appear to be extended
[Sat Oct 29 04:48:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 04:50:03 2011] Not overwriting source region fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src14_src.reg
[Sat Oct 29 04:50:03 2011] Extracting stamp from image fullrun_ccd7_acisf02832_pi14-548_cl_sm2.00.img.gz, (1094, 881) - (1152, 939)
[Sat Oct 29 04:50:03 2011] Writing fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src14.gif
[Sat Oct 29 04:50:56 2011] ../../acisf02832/products/events/fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src14_src.evt and ../../acisf02832/products/events/fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Sat Oct 29 04:50:56 2011] Size of ../../acisf02832/products/events/fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src14_src.evt.gz[events] = 27 counts
[Sat Oct 29 04:50:56 2011] Mean chipx,y = (267.07, 902.93)
[Sat Oct 29 04:50:56 2011] Mean tdetx,y = (4184.07, 2604.93)
[Sat Oct 29 04:50:56 2011] chipx,y range = (250.00-283.00, 886.00-922.00)
[Sat Oct 29 04:50:56 2011] Size of ../../acisf02832/products/events/fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 35 counts
[Sat Oct 29 04:50:56 2011] ../../acisf02832/products/images/fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src14_src.img and ../../acisf02832/products/images/fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Sat Oct 29 04:50:56 2011] ../../acisf02832/products/spectra/fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src14_src.pi and ../../acisf02832/products/spectra/fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Sat Oct 29 04:50:56 2011] Not generating rmf since there are only 27 counts
[Sat Oct 29 04:50:59 2011] ../../acisf02832/products/lightcurves/fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src14_src.lc and ../../acisf02832/products/lightcurves/fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Sat Oct 29 04:51:28 2011] 232.732
[Sat Oct 29 04:51:32 2011] Updating aperture counts using extracted products
[Sat Oct 29 04:51:32 2011] Error reading totcts from fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src14_src.pi.gz
[Sat Oct 29 04:51:32 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 04:51:32 2011] Using photon index=1.80, rate=0.000614, arf fullrun_ccd7_acisf02832_pi14-548_pass1_cl_src14.arf
[Sat Oct 29 04:51:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 04:51:32 2011] Updating source flux to 5.1e-15
[Sat Oct 29 04:51:38 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting