[Sat Sep 24 10:10:38 2011] Detection parameters:
  Position = (883.2, 1111.2) = 19 38 24.65 17 25 54.6
  Extent = 3.7" x 2.1", rotation angle = 8 degrees
  Source counts = 18.8 +/- 5.3
  Background counts = 9.2
  Rate = 0.0006 +/- 0.0002

[Sat Sep 24 10:10:39 2011] Off-axis axis estimate = 8.65'
[Sat Sep 24 10:11:50 2011] Using EEF radius (= 3.31 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 10:11:50 2011] Initial guess for spatial extent in simple fitting = 3.31"
[Sat Sep 24 10:11:50 2011] source mask rpix=6.7, npix_max = 208, mask sum = 196, frac = 0.938
[Sat Sep 24 10:11:50 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 3.31"
[Sat Sep 24 10:11:51 2011] fullrun_ccd3_acisf02807_pi14-548_cl_pass0_src5.ximg exists
[Sat Sep 24 10:11:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02807_pi14-548_cl_pass0_src5.csv
[Sat Sep 24 10:11:51 2011] fullrun_ccd3_acisf02807_pi14-548_cl_pass0_src5_1.ximg exists
[Sat Sep 24 10:11:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02807_pi14-548_cl_pass0_src5.csv
[Sat Sep 24 10:11:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02807_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02807_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 10:11:51 2011] fullrun_ccd3_acisf02807_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sat Sep 24 10:11:51 2011] fullrun_ccd3_acisf02807_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Sep 24 10:11:51 2011] Fit fullrun_ccd3_acisf02807_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Sep 24 10:12:01 2011] Spatial fit model total counts = 30.359300, observed total counts = 30.000000
[Sat Sep 24 10:12:01 2011] Offset between fit and detection position for source 5 = 2.539377 pixels
[Sat Sep 24 10:12:01 2011] 30.744700 total counts/ 12.085400 bgd. counts: snr = 5.367411
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.539377 pixels
  Position = (880.9, 1112.2) = 19 38 24.74 17 25 54.9
  Extent = 3.1 (1.0-4.5)", rotation angle = 0
  Source counts = 18.7 +/- 5.5
  Background counts = 12.1
  Rate = 0.0005 +/- 0.0002
[Sat Sep 24 10:12:01 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 10:12:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 10:12:01 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 10:12:01 2011] Source does appear to be extended
[Sat Sep 24 10:12:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 10:12:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 10:12:23 2011] Initial guess for spatial extent in simple fitting = 3.07"
[Sat Sep 24 10:12:23 2011] source mask rpix=6.2, npix_max = 181, mask sum = 196, frac = 1.080
[Sat Sep 24 10:12:23 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 3.07"
[Sat Sep 24 10:12:23 2011] fullrun_ccd3_acisf02807_pi14-548_cl_pass1_src5.ximg exists
[Sat Sep 24 10:12:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02807_pi14-548_cl_pass1_src5.csv
[Sat Sep 24 10:12:23 2011] fullrun_ccd3_acisf02807_pi14-548_cl_pass1_src5_1.ximg exists
[Sat Sep 24 10:12:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02807_pi14-548_cl_pass1_src5.csv
[Sat Sep 24 10:12:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02807_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02807_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 10:12:25 2011] fullrun_ccd3_acisf02807_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sat Sep 24 10:12:25 2011] fullrun_ccd3_acisf02807_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Sep 24 10:12:25 2011] Fit fullrun_ccd3_acisf02807_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Sep 24 10:12:34 2011] Spatial fit model total counts = 26.100900, observed total counts = 27.000000
[Sat Sep 24 10:12:34 2011] Offset between fit and detection position for source 5 = 2.212572 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.212572 pixels
  Position = (883.1, 1112.4) = 19 38 24.67 17 25 55.0
  Extent = 3.6 (2.6-4.9)", rotation angle = 0
  Source counts = 26.1 +/- 5.1
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Sat Sep 24 10:12:34 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 10:12:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 10:12:34 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 10:12:34 2011] Source does appear to be extended
[Sat Sep 24 10:12:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 10:15:17 2011] Not overwriting source region fullrun_ccd3_acisf02807_pi14-548_pass1_cl_src5_src.reg
[Sat Sep 24 10:15:17 2011] Extracting stamp from image fullrun_ccd3_acisf02807_pi14-548_cl_sm2.00.img.gz, (717, 946) - (1049, 1278)
[Sat Sep 24 10:15:17 2011] Writing fullrun_ccd3_acisf02807_pi14-548_pass1_cl_src5.gif
[Sat Sep 24 10:15:32 2011] ../../acisf02807/products/events/fullrun_ccd3_acisf02807_pi14-548_pass1_cl_src5_src.evt and ../../acisf02807/products/events/fullrun_ccd3_acisf02807_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sat Sep 24 10:15:32 2011] Size of ../../acisf02807/products/events/fullrun_ccd3_acisf02807_pi14-548_pass1_cl_src5_src.evt.gz[events] = 42 counts
[Sat Sep 24 10:15:32 2011] Mean chipx,y = (543.52, 30.69)
[Sat Sep 24 10:15:32 2011] Mean tdetx,y = (5101.31, 3604.52)
[Sat Sep 24 10:15:32 2011] chipx,y range = (503.00-582.00, 3.00-62.00)
[Sat Sep 24 10:15:32 2011] Size of ../../acisf02807/products/events/fullrun_ccd3_acisf02807_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 153 counts
[Sat Sep 24 10:15:32 2011] ../../acisf02807/products/images/fullrun_ccd3_acisf02807_pi14-548_pass1_cl_src5_src.img and ../../acisf02807/products/images/fullrun_ccd3_acisf02807_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Sat Sep 24 10:15:32 2011] ../../acisf02807/products/spectra/fullrun_ccd3_acisf02807_pi14-548_pass1_cl_src5_src.pi and ../../acisf02807/products/spectra/fullrun_ccd3_acisf02807_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sat Sep 24 10:15:32 2011] Not generating rmf since there are only 26 counts
[Sat Sep 24 10:15:36 2011] ../../acisf02807/products/lightcurves/fullrun_ccd3_acisf02807_pi14-548_pass1_cl_src5_src.lc and ../../acisf02807/products/lightcurves/fullrun_ccd3_acisf02807_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sat Sep 24 10:16:07 2011] 165.515
[Sat Sep 24 10:16:23 2011] Updating aperture counts using extracted products
[Sat Sep 24 10:16:23 2011] Error reading totcts from fullrun_ccd3_acisf02807_pi14-548_pass1_cl_src5_src.pi.gz
[Sat Sep 24 10:16:23 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 10:16:23 2011] Using photon index=1.80, rate=0.000766, arf fullrun_ccd3_acisf02807_pi14-548_pass1_cl_src5.arf
[Sat Sep 24 10:16:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 10:16:23 2011] Updating source flux to 1.2e-14
[Sat Sep 24 10:16:41 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Sep 24 10:16:42 2011] acisf02807/analysis//spectral/fullrun_ccd3_acisf02807_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete