[Sat Sep 24 08:19:45 2011] Detection parameters:
  Position = (783.0, 627.3) = 5 34 41.00 22 16 33.6
  Extent = 1.1" x 0.6", rotation angle = 42 degrees
  Source counts = 140.3 +/- 12.2
  Background counts = 8.7
  Rate = 0.007 +/- 0.0006

[Sat Sep 24 08:19:46 2011] Off-axis axis estimate = 5.09'
[Sat Sep 24 08:22:32 2011] Using EEF radius (= 1.22 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 08:22:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 08:22:32 2011] Initial guess for spatial extent in simple fitting = 1.22"
[Sat Sep 24 08:22:32 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.017
[Sat Sep 24 08:22:32 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.22"
[Sat Sep 24 08:22:33 2011] fullrun_ccd3_acisf02798_pi14-548_cl_pass0_src1.ximg exists
[Sat Sep 24 08:22:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02798_pi14-548_cl_pass0_src1.csv
[Sat Sep 24 08:22:33 2011] fullrun_ccd3_acisf02798_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Sep 24 08:22:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02798_pi14-548_cl_pass0_src1.csv
[Sat Sep 24 08:22:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02798_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02798_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 08:22:33 2011] fullrun_ccd3_acisf02798_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep 24 08:22:33 2011] fullrun_ccd3_acisf02798_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep 24 08:22:33 2011] Fit fullrun_ccd3_acisf02798_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep 24 08:22:45 2011] Spatial fit model total counts = 164.991000, observed total counts = 165.000000
[Sat Sep 24 08:22:45 2011] Offset between fit and detection position for source 2 = 0.383556 pixels
[Sat Sep 24 08:22:45 2011] 166.059900 total counts/ 47.747900 bgd. counts: snr = 17.121888
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.383556 pixels
  Position = (783.2, 627.7) = 5 34 41.01 22 16 33.5
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 118.3 +/- 12.9
  Background counts = 47.7
  Rate = 0.006 +/- 0.0006
[Sat Sep 24 08:22:45 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 08:22:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 08:22:45 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 08:22:45 2011] Source does appear to be extended
[Sat Sep 24 08:22:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 08:22:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 08:22:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 08:22:59 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Sat Sep 24 08:22:59 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.954
[Sat Sep 24 08:22:59 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.76"
[Sat Sep 24 08:22:59 2011] fullrun_ccd3_acisf02798_pi14-548_cl_pass1_src1.ximg exists
[Sat Sep 24 08:22:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02798_pi14-548_cl_pass1_src1.csv
[Sat Sep 24 08:22:59 2011] fullrun_ccd3_acisf02798_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Sep 24 08:22:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02798_pi14-548_cl_pass1_src1.csv
[Sat Sep 24 08:22:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02798_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02798_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 08:23:00 2011] fullrun_ccd3_acisf02798_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep 24 08:23:00 2011] fullrun_ccd3_acisf02798_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep 24 08:23:00 2011] Fit fullrun_ccd3_acisf02798_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep 24 08:23:08 2011] Spatial fit model total counts = 152.995000, observed total counts = 153.000000
[Sat Sep 24 08:23:08 2011] Offset between fit and detection position for source 2 = 0.041280 pixels
[Sat Sep 24 08:23:08 2011] 154.160800 total counts/ 39.023800 bgd. counts: snr = 18.431052
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.041280 pixels
  Position = (783.2, 627.7) = 5 34 41.01 22 16 33.6
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 115.1 +/- 12.4
  Background counts = 39.0
  Rate = 0.006 +/- 0.0006
[Sat Sep 24 08:23:08 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 08:23:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 08:23:08 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 08:23:08 2011] Source does appear to be extended
[Sat Sep 24 08:23:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 08:24:26 2011] Not overwriting source region fullrun_ccd3_acisf02798_pi14-548_pass1_cl_src2_src.reg
[Sat Sep 24 08:24:26 2011] Extracting stamp from image fullrun_ccd3_acisf02798_pi14-548_cl_sm2.00.img.gz, (749, 594) - (817, 662)
[Sat Sep 24 08:24:26 2011] Writing fullrun_ccd3_acisf02798_pi14-548_pass1_cl_src2.gif
[Sat Sep 24 08:24:26 2011] ../../acisf02798/products/events/fullrun_ccd3_acisf02798_pi14-548_pass1_cl_src2_src.evt and ../../acisf02798/products/events/fullrun_ccd3_acisf02798_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Sep 24 08:24:26 2011] Size of ../../acisf02798/products/events/fullrun_ccd3_acisf02798_pi14-548_pass1_cl_src2_src.evt.gz[events] = 134 counts
[Sat Sep 24 08:24:26 2011] Mean chipx,y = (750.00, 417.90)
[Sat Sep 24 08:24:26 2011] Mean tdetx,y = (4714.10, 3811.00)
[Sat Sep 24 08:24:26 2011] chipx,y range = (733.00-770.00, 400.00-437.00)
[Sat Sep 24 08:24:26 2011] Size of ../../acisf02798/products/events/fullrun_ccd3_acisf02798_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 66 counts
[Sat Sep 24 08:24:26 2011] ../../acisf02798/products/images/fullrun_ccd3_acisf02798_pi14-548_pass1_cl_src2_src.img and ../../acisf02798/products/images/fullrun_ccd3_acisf02798_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Sep 24 08:24:26 2011] ../../acisf02798/products/spectra/fullrun_ccd3_acisf02798_pi14-548_pass1_cl_src2_src.pi and ../../acisf02798/products/spectra/fullrun_ccd3_acisf02798_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Sep 24 08:24:29 2011] ../../acisf02798/products/lightcurves/fullrun_ccd3_acisf02798_pi14-548_pass1_cl_src2_src.lc and ../../acisf02798/products/lightcurves/fullrun_ccd3_acisf02798_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Sep 24 08:24:45 2011] Keeping rmf generated by specextract
[Sat Sep 24 08:24:45 2011] 186.788
[Sat Sep 24 08:24:48 2011] Updating aperture counts using extracted products
[Sat Sep 24 08:24:48 2011] Error reading totcts from fullrun_ccd3_acisf02798_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Sep 24 08:24:48 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 08:24:48 2011] Using photon index=1.80, rate=0.00576, arf fullrun_ccd3_acisf02798_pi14-548_pass1_cl_src2.arf
[Sat Sep 24 08:24:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 08:24:48 2011] Updating source flux to 7.1e-14
[Sat Sep 24 08:25:30 2011] Reading fit data from acisf02798/analysis//spectral/fullrun_ccd3_acisf02798_pi14-548_pass1_cl_src2_pl.csv
[Sat Sep 24 08:25:30 2011] Spectral fit parameter nH value = 3.78241e+21
[Sat Sep 24 08:25:30 2011] Spectral fit parameter PhoIndex value = 2.13942
[Sat Sep 24 08:25:30 2011] Failed to get F(0.3-8.0) from acisf02798/analysis//spectral/fullrun_ccd3_acisf02798_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Sep 24 08:25:30 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 08:25:30 2011] Using Nh = 3.8e+21, photon index=2.14, rate=0.00576, arf fullrun_ccd3_acisf02798_pi14-548_pass1_cl_src2.arf
[Sat Sep 24 08:25:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 08:25:30 2011] Updating source flux to 6.2e-14