[Sat Sep 24 08:19:45 2011] Detection parameters:
  Position = (556.6, 73.7) = 5 34 50.35 22 3 28.1
  Extent = 3.1" x 2.2", rotation angle = 100 degrees
  Source counts = 66.0 +/- 19.5
  Background counts = 316.0
  Rate = 0.003 +/- 0.001

[Sat Sep 24 08:19:45 2011] Off-axis axis estimate = 9.08'
[Sat Sep 24 08:22:30 2011] Using EEF radius (= 3.65 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 08:22:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 08:22:30 2011] Initial guess for spatial extent in simple fitting = 3.65"
[Sat Sep 24 08:22:30 2011] source mask rpix=7.4, npix_max = 250, mask sum = 256, frac = 1.023
[Sat Sep 24 08:22:30 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 3.65"
[Sat Sep 24 08:22:31 2011] fullrun_ccd2_acisf02798_pi14-548_cl_pass0_src5.ximg exists
[Sat Sep 24 08:22:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02798_pi14-548_cl_pass0_src5.csv
[Sat Sep 24 08:22:31 2011] fullrun_ccd2_acisf02798_pi14-548_cl_pass0_src5_1.ximg exists
[Sat Sep 24 08:22:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02798_pi14-548_cl_pass0_src5.csv
[Sat Sep 24 08:22:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02798_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02798_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 08:22:31 2011] fullrun_ccd2_acisf02798_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sat Sep 24 08:22:31 2011] fullrun_ccd2_acisf02798_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Sep 24 08:22:31 2011] Fit fullrun_ccd2_acisf02798_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Sep 24 08:22:44 2011] Spatial fit model total counts = 992.466000, observed total counts = 992.000000
[Sat Sep 24 08:22:44 2011] Offset between fit and detection position for source 20 = 0.597341 pixels
[Sat Sep 24 08:22:44 2011] 996.736900 total counts/ 959.013000 bgd. counts: snr = 1.218160
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.597341 pixels
  Position = (557.2, 73.5) = 5 34 50.35 22 3 27.7
  Extent = 2.1 (0.9-5.6)", rotation angle = 0
  Source counts = 37.7 +/- 31.6
  Background counts = 959.0
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability