[Mon Oct 31 16:22:52 2011] Detection parameters:
  Position = (1020.7, 632.9) = 14 3 50.46 54 24 13.6
  Extent = 1.8" x 1.2", rotation angle = 120 degrees
  Source counts = 67.2 +/- 8.5
  Background counts = 5.8
  Rate = 0.005 +/- 0.0006

[Mon Oct 31 16:22:53 2011] Off-axis axis estimate = 6.21'
[Mon Oct 31 16:23:36 2011] Using EEF radius (= 1.74 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 16:23:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 31 16:23:36 2011] Initial guess for spatial extent in simple fitting = 1.74"
[Mon Oct 31 16:23:36 2011] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.985
[Mon Oct 31 16:23:36 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.74"
[Mon Oct 31 16:23:37 2011] fullrun_ccd7_acisf02779_pi14-548_cl_pass0_src3.ximg exists
[Mon Oct 31 16:23:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02779_pi14-548_cl_pass0_src3.csv
[Mon Oct 31 16:23:37 2011] fullrun_ccd7_acisf02779_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Oct 31 16:23:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02779_pi14-548_cl_pass0_src3.csv
[Mon Oct 31 16:23:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02779_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02779_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 16:23:37 2011] fullrun_ccd7_acisf02779_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Oct 31 16:23:37 2011] fullrun_ccd7_acisf02779_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Oct 31 16:23:37 2011] Fit fullrun_ccd7_acisf02779_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Oct 31 16:23:43 2011] Spatial fit model total counts = 71.997100, observed total counts = 72.000000
[Mon Oct 31 16:23:43 2011] Offset between fit and detection position for source 3 = 1.022061 pixels
[Mon Oct 31 16:23:43 2011] 71.876600 total counts/ 12.975300 bgd. counts: snr = 16.351823
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.022061 pixels
  Position = (1020.9, 633.9) = 14 3 50.47 54 24 13.8
  Extent = 1.8 (1.5-2.3)", rotation angle = 0
  Source counts = 58.9 +/- 8.5
  Background counts = 13.0
  Rate = 0.004 +/- 0.0006
[Mon Oct 31 16:23:43 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 16:23:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 16:23:43 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 16:23:43 2011] Source does appear to be extended
[Mon Oct 31 16:23:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 16:23:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 16:23:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 31 16:23:58 2011] Initial guess for spatial extent in simple fitting = 1.84"
[Mon Oct 31 16:23:58 2011] source mask rpix=3.7, npix_max = 71, mask sum = 64, frac = 0.892
[Mon Oct 31 16:23:58 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.84"
[Mon Oct 31 16:23:58 2011] fullrun_ccd7_acisf02779_pi14-548_cl_pass1_src3.ximg exists
[Mon Oct 31 16:23:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02779_pi14-548_cl_pass1_src3.csv
[Mon Oct 31 16:23:58 2011] fullrun_ccd7_acisf02779_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Oct 31 16:23:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02779_pi14-548_cl_pass1_src3.csv
[Mon Oct 31 16:23:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02779_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02779_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 16:23:58 2011] fullrun_ccd7_acisf02779_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Oct 31 16:23:58 2011] fullrun_ccd7_acisf02779_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Oct 31 16:23:58 2011] Fit fullrun_ccd7_acisf02779_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Oct 31 16:24:05 2011] Spatial fit model total counts = 73.995200, observed total counts = 74.000000
[Mon Oct 31 16:24:05 2011] Offset between fit and detection position for source 3 = 0.659194 pixels
[Mon Oct 31 16:24:05 2011] 73.900320 total counts/ 9.382020 bgd. counts: snr = 21.063704
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.659194 pixels
  Position = (1021.2, 633.4) = 14 3 50.45 54 24 13.6
  Extent = 1.9 (1.6-2.3)", rotation angle = 0
  Source counts = 64.5 +/- 8.6
  Background counts = 9.4
  Rate = 0.005 +/- 0.0006
[Mon Oct 31 16:24:05 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 16:24:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 16:24:05 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 16:24:05 2011] Source does appear to be extended
[Mon Oct 31 16:24:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 16:25:50 2011] Not overwriting source region fullrun_ccd7_acisf02779_pi14-548_pass1_cl_src3_src.reg
[Mon Oct 31 16:25:50 2011] Extracting stamp from image fullrun_ccd7_acisf02779_pi14-548_cl_sm2.00.img.gz, (933, 545) - (1110, 722)
[Mon Oct 31 16:25:50 2011] Writing fullrun_ccd7_acisf02779_pi14-548_pass1_cl_src3.gif
[Mon Oct 31 16:25:57 2011] ../../acisf02779/products/events/fullrun_ccd7_acisf02779_pi14-548_pass1_cl_src3_src.evt and ../../acisf02779/products/events/fullrun_ccd7_acisf02779_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon Oct 31 16:25:57 2011] Size of ../../acisf02779/products/events/fullrun_ccd7_acisf02779_pi14-548_pass1_cl_src3_src.evt.gz[events] = 76 counts
[Mon Oct 31 16:25:57 2011] Mean chipx,y = (962.68, 399.68)
[Mon Oct 31 16:25:57 2011] Mean tdetx,y = (4879.68, 2101.68)
[Mon Oct 31 16:25:57 2011] chipx,y range = (937.00-986.00, 373.00-424.00)
[Mon Oct 31 16:25:57 2011] Size of ../../acisf02779/products/events/fullrun_ccd7_acisf02779_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 74 counts
[Mon Oct 31 16:25:57 2011] ../../acisf02779/products/images/fullrun_ccd7_acisf02779_pi14-548_pass1_cl_src3_src.img and ../../acisf02779/products/images/fullrun_ccd7_acisf02779_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon Oct 31 16:25:57 2011] ../../acisf02779/products/spectra/fullrun_ccd7_acisf02779_pi14-548_pass1_cl_src3_src.pi and ../../acisf02779/products/spectra/fullrun_ccd7_acisf02779_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon Oct 31 16:25:57 2011] Not generating rmf since there are only 64 counts
[Mon Oct 31 16:26:00 2011] ../../acisf02779/products/lightcurves/fullrun_ccd7_acisf02779_pi14-548_pass1_cl_src3_src.lc and ../../acisf02779/products/lightcurves/fullrun_ccd7_acisf02779_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon Oct 31 16:26:33 2011] 214.557
[Mon Oct 31 16:26:35 2011] Updating aperture counts using extracted products
[Mon Oct 31 16:26:35 2011] Error reading totcts from fullrun_ccd7_acisf02779_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Oct 31 16:26:35 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 16:26:35 2011] Using photon index=1.80, rate=0.00452, arf fullrun_ccd7_acisf02779_pi14-548_pass1_cl_src3.arf
[Mon Oct 31 16:26:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 16:26:36 2011] Updating source flux to 3.2e-14
[Mon Oct 31 16:26:47 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting