[Mon Sep 26 05:57:11 2011] Detection parameters:
  Position = (959.0, 529.8) = 0 24 57.04 -72 6 51.8
  Extent = 0.8" x 0.5", rotation angle = 55 degrees
  Source counts = 730.7 +/- 27.2
  Background counts = 9.3
  Rate = 0.01 +/- 0.0004

[Mon Sep 26 05:57:13 2011] Off-axis axis estimate = 3.50'
[Mon Sep 26 05:58:21 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 05:58:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 05:58:21 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Mon Sep 26 05:58:21 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.101
[Mon Sep 26 05:58:21 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.69"
[Mon Sep 26 05:58:21 2011] fullrun_ccd6_acisf02738_pi14-548_cl_pass0_src1.ximg exists
[Mon Sep 26 05:58:21 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf02738_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 05:58:21 2011] fullrun_ccd6_acisf02738_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Sep 26 05:58:21 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf02738_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 05:58:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02738_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02738_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 05:58:21 2011] fullrun_ccd6_acisf02738_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep 26 05:58:21 2011] fullrun_ccd6_acisf02738_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep 26 05:58:21 2011] Fit fullrun_ccd6_acisf02738_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep 26 05:58:40 2011] Spatial fit model total counts = 737.242000, observed total counts = 740.000000
[Mon Sep 26 05:58:40 2011] Offset between fit and detection position for source 3 = 0.759502 pixels
[Mon Sep 26 05:58:40 2011] 736.051600 total counts/ 32.765600 bgd. counts: snr = 122.863508
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.759502 pixels
  Position = (959.5, 530.4) = 0 24 57.04 -72 6 51.8
  Extent = 0.9 (0.8-0.9)", rotation angle = 0
  Source counts = 703.3 +/- 27.1
  Background counts = 32.8
  Rate = 0.01 +/- 0.0004
[Mon Sep 26 05:58:40 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 05:58:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 05:58:40 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 05:58:40 2011] Source does appear to be extended
[Mon Sep 26 05:58:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:59:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 05:59:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 05:59:10 2011] Initial guess for spatial extent in simple fitting = 0.87"
[Mon Sep 26 05:59:10 2011] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.211
[Mon Sep 26 05:59:10 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.87"
[Mon Sep 26 05:59:10 2011] fullrun_ccd6_acisf02738_pi14-548_cl_pass1_src1.ximg exists
[Mon Sep 26 05:59:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02738_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 05:59:10 2011] fullrun_ccd6_acisf02738_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Sep 26 05:59:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02738_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 05:59:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02738_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02738_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 05:59:10 2011] fullrun_ccd6_acisf02738_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Sep 26 05:59:10 2011] fullrun_ccd6_acisf02738_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Sep 26 05:59:10 2011] Fit fullrun_ccd6_acisf02738_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Sep 26 05:59:28 2011] Spatial fit model total counts = 740.000000, observed total counts = 740.000000
[Mon Sep 26 05:59:28 2011] Offset between fit and detection position for source 3 = 0.003680 pixels
[Mon Sep 26 05:59:28 2011] 738.781500 total counts/ 33.812500 bgd. counts: snr = 121.235938
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.003680 pixels
  Position = (959.5, 530.4) = 0 24 57.04 -72 6 51.8
  Extent = 0.9 (0.8-0.9)", rotation angle = 0
  Source counts = 705.0 +/- 27.2
  Background counts = 33.8
  Rate = 0.01 +/- 0.0004
[Mon Sep 26 05:59:28 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 05:59:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 05:59:28 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 05:59:28 2011] Source does appear to be extended
[Mon Sep 26 05:59:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 06:01:09 2011] Not overwriting source region fullrun_ccd6_acisf02738_pi14-548_pass1_cl_src3_src.reg
[Mon Sep 26 06:01:09 2011] Extracting stamp from image fullrun_ccd6_acisf02738_pi14-548_cl_sm2.00.img.gz, (920, 491) - (999, 570)
[Mon Sep 26 06:01:09 2011] Writing fullrun_ccd6_acisf02738_pi14-548_pass1_cl_src3.gif
[Mon Sep 26 06:01:11 2011] ../../acisf02738/products/events/fullrun_ccd6_acisf02738_pi14-548_pass1_cl_src3_src.evt and ../../acisf02738/products/events/fullrun_ccd6_acisf02738_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon Sep 26 06:01:11 2011] Size of ../../acisf02738/products/events/fullrun_ccd6_acisf02738_pi14-548_pass1_cl_src3_src.evt.gz[events] = 729 counts
[Mon Sep 26 06:01:11 2011] Mean chipx,y = (855.53, 654.93)
[Mon Sep 26 06:01:11 2011] Mean tdetx,y = (3730.53, 2356.93)
[Mon Sep 26 06:01:11 2011] chipx,y range = (834.00-877.00, 635.00-677.00)
[Mon Sep 26 06:01:11 2011] Size of ../../acisf02738/products/events/fullrun_ccd6_acisf02738_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 43 counts
[Mon Sep 26 06:01:11 2011] ../../acisf02738/products/images/fullrun_ccd6_acisf02738_pi14-548_pass1_cl_src3_src.img and ../../acisf02738/products/images/fullrun_ccd6_acisf02738_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon Sep 26 06:01:11 2011] ../../acisf02738/products/spectra/fullrun_ccd6_acisf02738_pi14-548_pass1_cl_src3_src.pi and ../../acisf02738/products/spectra/fullrun_ccd6_acisf02738_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon Sep 26 06:01:14 2011] ../../acisf02738/products/lightcurves/fullrun_ccd6_acisf02738_pi14-548_pass1_cl_src3_src.lc and ../../acisf02738/products/lightcurves/fullrun_ccd6_acisf02738_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon Sep 26 06:02:26 2011] Keeping rmf generated by specextract
[Mon Sep 26 06:02:26 2011] 208.68
[Mon Sep 26 06:09:54 2011] Updating aperture counts using extracted products
[Mon Sep 26 06:09:54 2011] Error reading totcts from fullrun_ccd6_acisf02738_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Sep 26 06:09:55 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 06:09:55 2011] Using photon index=1.80, rate=0.0103, arf fullrun_ccd6_acisf02738_pi14-548_pass1_cl_src3.arf
[Mon Sep 26 06:09:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 06:09:55 2011] Updating source flux to 1e-13
[Mon Sep 26 06:10:31 2011] Reading fit data from acisf02738/analysis//spectral/fullrun_ccd6_acisf02738_pi14-548_pass1_cl_src3_pl.csv
[Mon Sep 26 06:10:31 2011] Spectral fit parameter nH value = 7.20156e+20
[Mon Sep 26 06:10:31 2011] Spectral fit parameter PhoIndex value = 1.73257
[Mon Sep 26 06:10:31 2011] Failed to get F(0.3-8.0) from acisf02738/analysis//spectral/fullrun_ccd6_acisf02738_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Mon Sep 26 06:10:31 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 06:10:31 2011] Using Nh = 7.2e+20, photon index=1.73, rate=0.0103, arf fullrun_ccd6_acisf02738_pi14-548_pass1_cl_src3.arf
[Mon Sep 26 06:10:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 06:10:31 2011] Updating source flux to 1e-13