[Mon Oct 10 08:21:06 2011] Detection parameters:
  Position = (687.4, 670.5) = 0 25 22.02 -72 4 10.0
  Extent = 1.1" x 0.8", rotation angle = 34 degrees
  Source counts = 51.3 +/- 7.4
  Background counts = 3.7
  Rate = 0.0008 +/- 0.0001

[Mon Oct 10 08:21:07 2011] Off-axis axis estimate = 5.00'
[Mon Oct 10 08:22:29 2011] Using EEF radius (= 1.18 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 08:22:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 08:22:29 2011] Initial guess for spatial extent in simple fitting = 1.18"
[Mon Oct 10 08:22:29 2011] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.744
[Mon Oct 10 08:22:29 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.18"
[Mon Oct 10 08:22:29 2011] fullrun_ccd6_acisf02737_pi14-548_cl_pass0_src2.ximg exists
[Mon Oct 10 08:22:29 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf02737_pi14-548_cl_pass0_src2.csv
[Mon Oct 10 08:22:29 2011] fullrun_ccd6_acisf02737_pi14-548_cl_pass0_src2_1.ximg exists
[Mon Oct 10 08:22:29 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf02737_pi14-548_cl_pass0_src2.csv
[Mon Oct 10 08:22:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02737_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02737_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 08:22:30 2011] fullrun_ccd6_acisf02737_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Mon Oct 10 08:22:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02737_pi14-548_cl_pass0_tfrozen_src2.csv
[Mon Oct 10 08:22:30 2011] fullrun_ccd6_acisf02737_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Oct 10 08:22:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02737_pi14-548_cl_pass0_tfrozen_src2.csv
[Mon Oct 10 08:22:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02737_pi14-548_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02737_pi14-548_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 08:22:48 2011] Spatial fit model total counts = 53.505800, observed total counts = 59.000000
[Mon Oct 10 08:22:48 2011] Offset between fit and detection position for source 6 = 0.521654 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.521654 pixels
  Position = (687.7, 670.9) = 0 25 22.04 -72 4 10.1
  Extent = 1.4 (1.2-1.5)", rotation angle = 0
  Source counts = 54.6 +/- 7.4
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0001
[Mon Oct 10 08:22:48 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 08:22:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 08:22:48 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 08:22:48 2011] Source does appear to be extended
[Mon Oct 10 08:22:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 08:23:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 08:23:20 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 08:23:20 2011] Initial guess for spatial extent in simple fitting = 1.42"
[Mon Oct 10 08:23:20 2011] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.919
[Mon Oct 10 08:23:20 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.42"
[Mon Oct 10 08:23:21 2011] fullrun_ccd6_acisf02737_pi14-548_cl_pass1_src2.ximg exists
[Mon Oct 10 08:23:21 2011] fullrun_ccd6_acisf02737_pi14-548_cl_pass1_src2_1.ximg exists
[Mon Oct 10 08:23:21 2011] Fit fullrun_ccd6_acisf02737_pi14-548_cl_pass1_src2 appears to have run properly
[Mon Oct 10 08:23:21 2011] fullrun_ccd6_acisf02737_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Mon Oct 10 08:23:21 2011] fullrun_ccd6_acisf02737_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Oct 10 08:23:21 2011] Fit fullrun_ccd6_acisf02737_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Oct 10 08:23:41 2011] Spatial fit model total counts = 57.049600, observed total counts = 59.000000
[Mon Oct 10 08:23:41 2011] Offset between fit and detection position for source 6 = 0.261200 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.261200 pixels
  Position = (687.8, 671.2) = 0 25 22.03 -72 4 10.0
  Extent = 1.7 (1.5-2.1)" x 1.1 (0.8-1.4)", rotation angle = 350 (318-8) degrees
  Source counts = 57.1 +/- 7.6
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0001
[Mon Oct 10 08:23:41 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 08:23:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 08:23:41 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 08:23:41 2011] Source does appear to be extended
[Mon Oct 10 08:23:41 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.12
[Mon Oct 10 08:25:09 2011] Not overwriting source region fullrun_ccd6_acisf02737_pi14-548_pass1_cl_src6_src.reg
[Mon Oct 10 08:25:09 2011] Extracting stamp from image fullrun_ccd6_acisf02737_pi14-548_cl_sm2.00.img.gz, (609, 592) - (767, 750)
[Mon Oct 10 08:25:09 2011] Writing fullrun_ccd6_acisf02737_pi14-548_pass1_cl_src6.gif
[Mon Oct 10 08:25:16 2011] ../../acisf02737/products/events/fullrun_ccd6_acisf02737_pi14-548_pass1_cl_src6_src.evt and ../../acisf02737/products/events/fullrun_ccd6_acisf02737_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Mon Oct 10 08:25:16 2011] Size of ../../acisf02737/products/events/fullrun_ccd6_acisf02737_pi14-548_pass1_cl_src6_src.evt.gz[events] = 63 counts
[Mon Oct 10 08:25:16 2011] Mean chipx,y = (661.79, 389.35)
[Mon Oct 10 08:25:16 2011] Mean tdetx,y = (3536.79, 2091.35)
[Mon Oct 10 08:25:16 2011] chipx,y range = (643.00-691.00, 370.00-412.00)
[Mon Oct 10 08:25:16 2011] Size of ../../acisf02737/products/events/fullrun_ccd6_acisf02737_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 132 counts
[Mon Oct 10 08:25:16 2011] ../../acisf02737/products/images/fullrun_ccd6_acisf02737_pi14-548_pass1_cl_src6_src.img and ../../acisf02737/products/images/fullrun_ccd6_acisf02737_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Mon Oct 10 08:25:16 2011] ../../acisf02737/products/spectra/fullrun_ccd6_acisf02737_pi14-548_pass1_cl_src6_src.pi and ../../acisf02737/products/spectra/fullrun_ccd6_acisf02737_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Mon Oct 10 08:25:16 2011] Not generating rmf since there are only 57 counts
[Mon Oct 10 08:25:19 2011] ../../acisf02737/products/lightcurves/fullrun_ccd6_acisf02737_pi14-548_pass1_cl_src6_src.lc and ../../acisf02737/products/lightcurves/fullrun_ccd6_acisf02737_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Mon Oct 10 08:26:10 2011] 201.865
[Mon Oct 10 08:31:08 2011] Updating aperture counts using extracted products
[Mon Oct 10 08:31:08 2011] Error reading totcts from fullrun_ccd6_acisf02737_pi14-548_pass1_cl_src6_src.pi.gz
[Mon Oct 10 08:31:08 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 08:31:08 2011] Using photon index=1.80, rate=0.000876, arf fullrun_ccd6_acisf02737_pi14-548_pass1_cl_src6.arf
[Mon Oct 10 08:31:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 08:31:08 2011] Updating source flux to 8.9e-15
[Mon Oct 10 08:31:40 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting