[Tue Sep 27 22:14:21 2011] Detection parameters:
  Position = (439.4, 435.5) = 17 20 33.45 -35 44 5.4
  Extent = 0.7" x 0.5", rotation angle = 154 degrees
  Source counts = 15.0 +/- 4.0
  Background counts = 1.0
  Rate = 0.0004 +/- 0.0001

[Tue Sep 27 22:14:28 2011] Off-axis axis estimate = 5.18'
[Tue Sep 27 22:16:34 2011] Using EEF radius (= 1.25 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 22:16:34 2011] Initial guess for spatial extent in simple fitting = 1.25"
[Tue Sep 27 22:16:34 2011] source mask rpix=2.5, npix_max = 37, mask sum = 42, frac = 1.129
[Tue Sep 27 22:16:34 2011] Giving source the simple spatial ID 42 for pass 0, mean size = 1.25"
[Tue Sep 27 22:16:36 2011] fullrun_ccd1_acisf02574_pi14-548_cl_pass0_src42.ximg exists
[Tue Sep 27 22:16:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02574_pi14-548_cl_pass0_src42.csv
[Tue Sep 27 22:16:36 2011] fullrun_ccd1_acisf02574_pi14-548_cl_pass0_src42_1.ximg exists
[Tue Sep 27 22:16:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02574_pi14-548_cl_pass0_src42.csv
[Tue Sep 27 22:16:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf02574_pi14-548_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf02574_pi14-548_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 22:16:37 2011] fullrun_ccd1_acisf02574_pi14-548_cl_pass0_tfrozen_src42.ximg exists
[Tue Sep 27 22:16:37 2011] fullrun_ccd1_acisf02574_pi14-548_cl_pass0_tfrozen_src42_1.ximg exists
[Tue Sep 27 22:16:37 2011] Fit fullrun_ccd1_acisf02574_pi14-548_cl_pass0_tfrozen_src42 appears to have run properly
[Tue Sep 27 22:17:17 2011] Spatial fit model total counts = 17.359200, observed total counts = 18.000000
[Tue Sep 27 22:17:17 2011] Offset between fit and detection position for source 48 = 0.703003 pixels
[Tue Sep 27 22:17:17 2011] 17.970420 total counts/ 1.958120 bgd. counts: snr = 11.442846
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.703003 pixels
  Position = (440.0, 435.9) = 17 20 33.45 -35 44 5.4
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 16.0 +/- 4.2
  Background counts = 2.0
  Rate = 0.0004 +/- 0.0001
[Tue Sep 27 22:17:17 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 22:17:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 22:17:17 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 22:17:17 2011] Source does appear to be extended
[Tue Sep 27 22:17:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 22:19:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 22:19:01 2011] Initial guess for spatial extent in simple fitting = 0.87"
[Tue Sep 27 22:19:01 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.783
[Tue Sep 27 22:19:01 2011] Giving source the simple spatial ID 42 for pass 1, mean size = 0.87"
[Tue Sep 27 22:19:15 2011] fullrun_ccd1_acisf02574_pi14-548_cl_pass1_src42.ximg exists
[Tue Sep 27 22:19:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02574_pi14-548_cl_pass1_src42.csv
[Tue Sep 27 22:19:16 2011] fullrun_ccd1_acisf02574_pi14-548_cl_pass1_src42_1.ximg exists
[Tue Sep 27 22:19:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02574_pi14-548_cl_pass1_src42.csv
[Tue Sep 27 22:19:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf02574_pi14-548_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf02574_pi14-548_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 22:19:22 2011] fullrun_ccd1_acisf02574_pi14-548_cl_pass1_tfrozen_src42.ximg exists
[Tue Sep 27 22:19:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02574_pi14-548_cl_pass1_tfrozen_src42.csv
[Tue Sep 27 22:19:22 2011] fullrun_ccd1_acisf02574_pi14-548_cl_pass1_tfrozen_src42_1.ximg exists
[Tue Sep 27 22:19:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02574_pi14-548_cl_pass1_tfrozen_src42.csv
[Tue Sep 27 22:19:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf02574_pi14-548_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf02574_pi14-548_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 22:20:30 2011] Spatial fit model total counts = 17.034200, observed total counts = 19.000000
[Tue Sep 27 22:20:30 2011] Offset between fit and detection position for source 48 = 0.273737 pixels
[Tue Sep 27 22:20:30 2011] 17.366605 total counts/ 0.431605 bgd. counts: snr = 25.777570
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.273737 pixels
  Position = (439.9, 436.2) = 17 20 33.45 -35 44 5.3
  Extent = 0.9 (0.8-1.3)", rotation angle = 0
  Source counts = 16.9 +/- 4.2
  Background counts = 0.4
  Rate = 0.0004 +/- 0.0001
[Tue Sep 27 22:20:30 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 22:20:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 22:20:30 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 22:20:30 2011] Source does appear to be extended
[Tue Sep 27 22:20:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 22:44:39 2011] Not overwriting source region fullrun_ccd1_acisf02574_pi14-548_pass1_cl_src48_src.reg
[Tue Sep 27 22:44:39 2011] Extracting stamp from image fullrun_ccd1_acisf02574_pi14-548_cl_sm2.00.img.gz, (398, 394) - (482, 479)
[Tue Sep 27 22:44:39 2011] Writing fullrun_ccd1_acisf02574_pi14-548_pass1_cl_src48.gif
[Tue Sep 27 22:51:21 2011] ../../acisf02574/products/events/fullrun_ccd1_acisf02574_pi14-548_pass1_cl_src48_src.evt and ../../acisf02574/products/events/fullrun_ccd1_acisf02574_pi14-548_pass1_cl_src48_bgd.evt exist, delete to re-create
[Tue Sep 27 22:51:21 2011] Size of ../../acisf02574/products/events/fullrun_ccd1_acisf02574_pi14-548_pass1_cl_src48_src.evt.gz[events] = 18 counts
[Tue Sep 27 22:51:21 2011] Mean chipx,y = (419.67, 606.50)
[Tue Sep 27 22:51:21 2011] Mean tdetx,y = (4525.50, 4526.67)
[Tue Sep 27 22:51:21 2011] chipx,y range = (404.00-438.00, 588.00-622.00)
[Tue Sep 27 22:51:21 2011] Size of ../../acisf02574/products/events/fullrun_ccd1_acisf02574_pi14-548_pass1_cl_src48_bgd.evt.gz[events] = 20 counts
[Tue Sep 27 22:51:21 2011] ../../acisf02574/products/images/fullrun_ccd1_acisf02574_pi14-548_pass1_cl_src48_src.img and ../../acisf02574/products/images/fullrun_ccd1_acisf02574_pi14-548_pass1_cl_src48_bgd.img exist, delete to re-create
[Tue Sep 27 22:51:21 2011] Not generating rmf since there are only 16 counts
[Tue Sep 27 22:51:21 2011] arf not found, will run specextract
[Tue Sep 27 22:51:23 2011] ../../acisf02574/products/spectra/fullrun_ccd1_acisf02574_pi14-548_pass1_cl_src48_bkg.pi not found
[Tue Sep 27 22:51:23 2011] ../../acisf02574/products/spectra/fullrun_ccd1_acisf02574_pi14-548_pass1_cl_src48.warf not found
[Tue Sep 27 22:51:23 2011] ../../acisf02574/products/spectra/fullrun_ccd1_acisf02574_pi14-548_pass1_cl_src48.wrmf not found
[Tue Sep 27 22:51:23 2011] Removal of ../../acisf02574/products/spectra/fullrun_ccd1_acisf02574_pi14-548_pass1_cl_src48.soff failed
[Tue Sep 27 22:51:23 2011] Failed to rename ../../acisf02574/products/spectra/fullrun_ccd1_acisf02574_pi14-548_pass1_cl_src48_grp.pi to ../../acisf02574/products/spectra/fullrun_ccd1_acisf02574_pi14-548_pass1_cl_src48_src.pi
[Tue Sep 27 22:51:29 2011] ../../acisf02574/products/lightcurves/fullrun_ccd1_acisf02574_pi14-548_pass1_cl_src48_src.lc and ../../acisf02574/products/lightcurves/fullrun_ccd1_acisf02574_pi14-548_pass1_cl_src48_bgd.lc exist, delete to re-create
[Tue Sep 27 22:56:34 2011] No arf file found
[Tue Sep 27 23:13:38 2011] Updating aperture counts using extracted products
[Tue Sep 27 23:13:38 2011] Error reading totcts from fullrun_ccd1_acisf02574_pi14-548_pass1_cl_src48_src.pi
[Tue Sep 27 23:13:39 2011] No arf file for this source, not re-computing flux
[Tue Sep 27 23:13:51 2011] Source 48 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Sep 27 23:13:52 2011] acisf02574/analysis//spectral/fullrun_ccd1_acisf02574_pi14-548_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete