[Mon Oct 31 09:02:20 2011] Detection parameters:
  Position = (608.7, 150.6) = 17 20 16.14 -35 55 36.9
  Extent = 0.5" x 0.5", rotation angle = 122 degrees
  Source counts = 23.6 +/- 5.1
  Background counts = 2.4
  Rate = 0.0006 +/- 0.0001

[Mon Oct 31 09:02:30 2011] Off-axis axis estimate = 3.27'
[Mon Oct 31 09:04:54 2011] Using EEF radius (= 0.64 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 09:04:54 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Mon Oct 31 09:04:54 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.929
[Mon Oct 31 09:04:54 2011] Giving source the simple spatial ID 78 for pass 0, mean size = 0.64"
[Mon Oct 31 09:05:01 2011] fullrun_ccd3_acisf02573_pi14-548_cl_pass0_src78.ximg exists
[Mon Oct 31 09:05:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02573_pi14-548_cl_pass0_src78.csv
[Mon Oct 31 09:05:01 2011] fullrun_ccd3_acisf02573_pi14-548_cl_pass0_src78_1.ximg exists
[Mon Oct 31 09:05:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02573_pi14-548_cl_pass0_src78.csv
[Mon Oct 31 09:05:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02573_pi14-548_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02573_pi14-548_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 09:05:03 2011] fullrun_ccd3_acisf02573_pi14-548_cl_pass0_tfrozen_src78.ximg exists
[Mon Oct 31 09:05:03 2011] fullrun_ccd3_acisf02573_pi14-548_cl_pass0_tfrozen_src78_1.ximg exists
[Mon Oct 31 09:05:03 2011] Fit fullrun_ccd3_acisf02573_pi14-548_cl_pass0_tfrozen_src78 appears to have run properly
[Mon Oct 31 09:06:03 2011] Spatial fit model total counts = 29.049900, observed total counts = 30.000000
[Mon Oct 31 09:06:03 2011] Offset between fit and detection position for source 25 = 0.746089 pixels
[Mon Oct 31 09:06:03 2011] 28.679450 total counts/ 5.140550 bgd. counts: snr = 10.382008
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.746089 pixels
  Position = (609.1, 151.2) = 17 20 16.15 -35 55 36.8
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 23.5 +/- 5.4
  Background counts = 5.1
  Rate = 0.0006 +/- 0.0001
[Mon Oct 31 09:06:03 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 09:06:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 09:06:03 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 09:06:03 2011] Source does appear to be extended
[Mon Oct 31 09:06:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 09:07:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 09:07:10 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Mon Oct 31 09:07:10 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.067
[Mon Oct 31 09:07:10 2011] Giving source the simple spatial ID 78 for pass 1, mean size = 0.58"
[Mon Oct 31 09:07:17 2011] fullrun_ccd3_acisf02573_pi14-548_cl_pass1_src78.ximg exists
[Mon Oct 31 09:07:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02573_pi14-548_cl_pass1_src78.csv
[Mon Oct 31 09:07:17 2011] fullrun_ccd3_acisf02573_pi14-548_cl_pass1_src78_1.ximg exists
[Mon Oct 31 09:07:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02573_pi14-548_cl_pass1_src78.csv
[Mon Oct 31 09:07:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02573_pi14-548_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02573_pi14-548_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 09:07:22 2011] fullrun_ccd3_acisf02573_pi14-548_cl_pass1_tfrozen_src78.ximg exists
[Mon Oct 31 09:07:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02573_pi14-548_cl_pass1_tfrozen_src78.csv
[Mon Oct 31 09:07:22 2011] fullrun_ccd3_acisf02573_pi14-548_cl_pass1_tfrozen_src78_1.ximg exists
[Mon Oct 31 09:07:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02573_pi14-548_cl_pass1_tfrozen_src78.csv
[Mon Oct 31 09:07:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02573_pi14-548_cl_pass1_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02573_pi14-548_cl_pass1_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 09:08:21 2011] Spatial fit model total counts = 25.064400, observed total counts = 29.000000
[Mon Oct 31 09:08:21 2011] Offset between fit and detection position for source 25 = 0.145336 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.145336 pixels
  Position = (609.0, 151.1) = 17 20 16.15 -35 55 36.9
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 26.2 +/- 5.1
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Mon Oct 31 09:08:21 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 09:08:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 09:08:21 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 09:08:21 2011] Source does appear to be extended
[Mon Oct 31 09:08:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 09:37:57 2011] Not overwriting source region fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src25_src.reg
[Mon Oct 31 09:37:57 2011] Extracting stamp from image fullrun_ccd3_acisf02573_pi14-548_cl_sm2.00.img.gz, (581, 123) - (637, 179)
[Mon Oct 31 09:37:57 2011] Writing fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src25.gif
[Mon Oct 31 09:47:12 2011] ../../acisf02573/products/events/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src25_src.evt and ../../acisf02573/products/events/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src25_bgd.evt exist, delete to re-create
[Mon Oct 31 09:47:12 2011] Size of ../../acisf02573/products/events/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src25_src.evt.gz[events] = 26 counts
[Mon Oct 31 09:47:12 2011] Mean chipx,y = (585.08, 901.69)
[Mon Oct 31 09:47:12 2011] Mean tdetx,y = (4230.31, 3646.08)
[Mon Oct 31 09:47:12 2011] chipx,y range = (568.00-600.00, 885.00-917.00)
[Mon Oct 31 09:47:12 2011] Size of ../../acisf02573/products/events/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 30 counts
[Mon Oct 31 09:47:12 2011] ../../acisf02573/products/images/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src25_src.img and ../../acisf02573/products/images/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src25_bgd.img exist, delete to re-create
[Mon Oct 31 09:47:12 2011] Not generating rmf since there are only 26 counts
[Mon Oct 31 09:47:12 2011] arf not found, will run specextract
[Mon Oct 31 09:47:14 2011] ../../acisf02573/products/spectra/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src25_bkg.pi not found
[Mon Oct 31 09:47:14 2011] ../../acisf02573/products/spectra/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src25.warf not found
[Mon Oct 31 09:47:14 2011] ../../acisf02573/products/spectra/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src25.wrmf not found
[Mon Oct 31 09:47:14 2011] Removal of ../../acisf02573/products/spectra/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src25.soff failed
[Mon Oct 31 09:47:14 2011] Failed to rename ../../acisf02573/products/spectra/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src25_grp.pi to ../../acisf02573/products/spectra/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src25_src.pi
[Mon Oct 31 09:47:19 2011] ../../acisf02573/products/lightcurves/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src25_src.lc and ../../acisf02573/products/lightcurves/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src25_bgd.lc exist, delete to re-create
[Mon Oct 31 10:04:37 2011] No arf file found
[Mon Oct 31 10:05:23 2011] Updating aperture counts using extracted products
[Mon Oct 31 10:05:23 2011] Error reading totcts from fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src25_src.pi
[Mon Oct 31 10:05:24 2011] No arf file for this source, not re-computing flux
[Mon Oct 31 10:05:40 2011] Source 25 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 31 10:05:41 2011] acisf02573/analysis//spectral/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete