[Mon Oct 31 09:02:25 2011] Detection parameters:
  Position = (1040.5, 320.5) = 17 19 58.66 -35 54 13.3
  Extent = 0.5" x 0.5", rotation angle = 31 degrees
  Source counts = 18.2 +/- 4.5
  Background counts = 1.8
  Rate = 0.0005 +/- 0.0001

[Mon Oct 31 09:02:30 2011] Off-axis axis estimate = 2.17'
[Mon Oct 31 09:04:54 2011] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 09:04:54 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Mon Oct 31 09:04:54 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.128
[Mon Oct 31 09:04:54 2011] Giving source the simple spatial ID 98 for pass 0, mean size = 0.45"
[Mon Oct 31 09:05:02 2011] fullrun_ccd3_acisf02573_pi14-548_cl_pass0_src98.ximg exists
[Mon Oct 31 09:05:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02573_pi14-548_cl_pass0_src98.csv
[Mon Oct 31 09:05:02 2011] fullrun_ccd3_acisf02573_pi14-548_cl_pass0_src98_1.ximg exists
[Mon Oct 31 09:05:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02573_pi14-548_cl_pass0_src98.csv
[Mon Oct 31 09:05:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02573_pi14-548_cl_pass0_src98_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02573_pi14-548_cl_pass0_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 09:05:04 2011] fullrun_ccd3_acisf02573_pi14-548_cl_pass0_tfrozen_src98.ximg exists
[Mon Oct 31 09:05:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02573_pi14-548_cl_pass0_tfrozen_src98.csv
[Mon Oct 31 09:05:04 2011] fullrun_ccd3_acisf02573_pi14-548_cl_pass0_tfrozen_src98_1.ximg exists
[Mon Oct 31 09:05:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02573_pi14-548_cl_pass0_tfrozen_src98.csv
[Mon Oct 31 09:05:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02573_pi14-548_cl_pass0_tfrozen_src98_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02573_pi14-548_cl_pass0_tfrozen_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 09:06:03 2011] Spatial fit model total counts = 18.038000, observed total counts = 21.000000
[Mon Oct 31 09:06:03 2011] Offset between fit and detection position for source 142 = 0.299552 pixels
[Mon Oct 31 09:06:03 2011] 19.507480 total counts/ 1.803680 bgd. counts: snr = 13.182165
Spatial fit parameters:
  Offset between fit and detection position for source 142 = 0.299552 pixels
  Position = (1040.6, 320.8) = 17 19 58.67 -35 54 13.5
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 17.7 +/- 4.4
  Background counts = 1.8
  Rate = 0.0004 +/- 0.0001
[Mon Oct 31 09:06:03 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 09:06:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 09:06:03 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 09:06:03 2011] Source does appear to be extended
[Mon Oct 31 09:06:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 09:07:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 09:07:10 2011] Initial guess for spatial extent in simple fitting = 0.37"
[Mon Oct 31 09:07:10 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.944
[Mon Oct 31 09:07:10 2011] Giving source the simple spatial ID 98 for pass 1, mean size = 0.37"
[Mon Oct 31 09:07:19 2011] fullrun_ccd3_acisf02573_pi14-548_cl_pass1_src98.ximg exists
[Mon Oct 31 09:07:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02573_pi14-548_cl_pass1_src98.csv
[Mon Oct 31 09:07:19 2011] fullrun_ccd3_acisf02573_pi14-548_cl_pass1_src98_1.ximg exists
[Mon Oct 31 09:07:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02573_pi14-548_cl_pass1_src98.csv
[Mon Oct 31 09:07:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02573_pi14-548_cl_pass1_src98_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02573_pi14-548_cl_pass1_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 09:07:23 2011] fullrun_ccd3_acisf02573_pi14-548_cl_pass1_tfrozen_src98.ximg exists
[Mon Oct 31 09:07:23 2011] fullrun_ccd3_acisf02573_pi14-548_cl_pass1_tfrozen_src98_1.ximg exists
[Mon Oct 31 09:07:23 2011] Fit fullrun_ccd3_acisf02573_pi14-548_cl_pass1_tfrozen_src98 appears to have run properly
[Mon Oct 31 09:08:21 2011] Spatial fit model total counts = 20.141400, observed total counts = 21.000000
[Mon Oct 31 09:08:21 2011] Offset between fit and detection position for source 142 = 0.010872 pixels
[Mon Oct 31 09:08:21 2011] 21.283650 total counts/ 3.534850 bgd. counts: snr = 9.440250
Spatial fit parameters:
  Offset between fit and detection position for source 142 = 0.010872 pixels
  Position = (1040.6, 320.8) = 17 19 58.67 -35 54 13.4
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 17.7 +/- 4.6
  Background counts = 3.5
  Rate = 0.0004 +/- 0.0001
[Mon Oct 31 09:08:21 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 09:08:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 09:08:21 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 09:08:21 2011] Source does appear to be extended
[Mon Oct 31 09:08:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 09:37:58 2011] Not overwriting source region fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src142_src.reg
[Mon Oct 31 09:37:58 2011] Extracting stamp from image fullrun_ccd3_acisf02573_pi14-548_cl_sm2.00.img.gz, (1024, 304) - (1058, 338)
[Mon Oct 31 09:37:58 2011] Writing fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src142.gif
[Mon Oct 31 09:49:31 2011] ../../acisf02573/products/events/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src142_src.evt and ../../acisf02573/products/events/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src142_bgd.evt exist, delete to re-create
[Mon Oct 31 09:49:31 2011] Size of ../../acisf02573/products/events/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src142_src.evt.gz[events] = 19 counts
[Mon Oct 31 09:49:31 2011] Mean chipx,y = (1009.79, 742.21)
[Mon Oct 31 09:49:31 2011] Mean tdetx,y = (4389.79, 4070.79)
[Mon Oct 31 09:49:31 2011] chipx,y range = (1001.00-1022.00, 724.00-755.00)
[Mon Oct 31 09:49:31 2011] Size of ../../acisf02573/products/events/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src142_bgd.evt.gz[events] = 4 counts
[Mon Oct 31 09:49:31 2011] ../../acisf02573/products/images/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src142_src.img and ../../acisf02573/products/images/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src142_bgd.img exist, delete to re-create
[Mon Oct 31 09:49:31 2011] Not generating rmf since there are only 17 counts
[Mon Oct 31 09:49:31 2011] arf not found, will run specextract
[Mon Oct 31 09:49:33 2011] ../../acisf02573/products/spectra/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src142_bkg.pi not found
[Mon Oct 31 09:49:33 2011] ../../acisf02573/products/spectra/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src142.warf not found
[Mon Oct 31 09:49:33 2011] ../../acisf02573/products/spectra/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src142.wrmf not found
[Mon Oct 31 09:49:33 2011] Removal of ../../acisf02573/products/spectra/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src142.soff failed
[Mon Oct 31 09:49:33 2011] Failed to rename ../../acisf02573/products/spectra/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src142_grp.pi to ../../acisf02573/products/spectra/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src142_src.pi
[Mon Oct 31 09:49:39 2011] ../../acisf02573/products/lightcurves/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src142_src.lc and ../../acisf02573/products/lightcurves/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src142_bgd.lc exist, delete to re-create
[Mon Oct 31 10:04:37 2011] No arf file found
[Mon Oct 31 10:05:23 2011] Updating aperture counts using extracted products
[Mon Oct 31 10:05:23 2011] Error reading totcts from fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src142_src.pi
[Mon Oct 31 10:05:24 2011] No arf file for this source, not re-computing flux
[Mon Oct 31 10:05:40 2011] Source 142 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 31 10:05:41 2011] acisf02573/analysis//spectral/fullrun_ccd3_acisf02573_pi14-548_pass1_cl_src142_pl.csv not found, spectral fit skipped or did not complete