[Mon Oct 31 09:02:08 2011] Detection parameters:
  Position = (423.3, 645.4) = 17 19 40.70 -35 59 55.2
  Extent = 0.8" x 0.5", rotation angle = 167 degrees
  Source counts = 21.5 +/- 4.8
  Background counts = 1.5
  Rate = 0.0005 +/- 0.0001

[Mon Oct 31 09:02:10 2011] Off-axis axis estimate = 5.34'
[Mon Oct 31 09:04:42 2011] Using EEF radius (= 1.32 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 09:04:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 31 09:04:42 2011] Initial guess for spatial extent in simple fitting = 1.32"
[Mon Oct 31 09:04:42 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.033
[Mon Oct 31 09:04:42 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.32"
[Mon Oct 31 09:04:43 2011] fullrun_ccd0_acisf02573_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 31 09:04:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02573_pi14-548_cl_pass0_src1.csv
[Mon Oct 31 09:04:43 2011] fullrun_ccd0_acisf02573_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 31 09:04:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02573_pi14-548_cl_pass0_src1.csv
[Mon Oct 31 09:04:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf02573_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf02573_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 09:04:44 2011] fullrun_ccd0_acisf02573_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 31 09:04:44 2011] fullrun_ccd0_acisf02573_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 31 09:04:44 2011] Fit fullrun_ccd0_acisf02573_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 31 09:05:28 2011] Spatial fit model total counts = 31.687800, observed total counts = 34.000000
[Mon Oct 31 09:05:28 2011] Offset between fit and detection position for source 1 = 0.990477 pixels
[Mon Oct 31 09:05:28 2011] 33.234500 total counts/ 12.092300 bgd. counts: snr = 6.079890
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.990477 pixels
  Position = (424.2, 645.8) = 17 19 40.69 -35 59 55.3
  Extent = 0.8 (0.6-1.5)", rotation angle = 0
  Source counts = 21.1 +/- 5.8
  Background counts = 12.1
  Rate = 0.0005 +/- 0.0001
[Mon Oct 31 09:05:29 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 09:05:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 09:05:29 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 09:05:29 2011] Source does appear to be extended
[Mon Oct 31 09:05:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 09:06:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 09:06:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 31 09:06:58 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Mon Oct 31 09:06:58 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.830
[Mon Oct 31 09:06:58 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.83"
[Mon Oct 31 09:06:58 2011] fullrun_ccd0_acisf02573_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 31 09:06:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02573_pi14-548_cl_pass1_src1.csv
[Mon Oct 31 09:06:58 2011] fullrun_ccd0_acisf02573_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 31 09:06:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02573_pi14-548_cl_pass1_src1.csv
[Mon Oct 31 09:06:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf02573_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf02573_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 09:07:00 2011] fullrun_ccd0_acisf02573_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 31 09:07:00 2011] fullrun_ccd0_acisf02573_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 31 09:07:00 2011] Fit fullrun_ccd0_acisf02573_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 31 09:07:42 2011] Spatial fit model total counts = 30.615800, observed total counts = 32.000000
[Mon Oct 31 09:07:42 2011] Offset between fit and detection position for source 1 = 0.093681 pixels
[Mon Oct 31 09:07:42 2011] 32.374100 total counts/ 12.297800 bgd. counts: snr = 5.724927
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.093681 pixels
  Position = (424.1, 645.8) = 17 19 40.69 -35 59 55.3
  Extent = 0.8 (0.5-1.1)", rotation angle = 0
  Source counts = 20.1 +/- 5.7
  Background counts = 12.3
  Rate = 0.0005 +/- 0.0001
[Mon Oct 31 09:07:42 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 09:07:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 09:07:42 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 09:07:42 2011] Source does appear to be extended
[Mon Oct 31 09:07:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 09:09:16 2011] Not overwriting source region fullrun_ccd0_acisf02573_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 31 09:09:16 2011] Extracting stamp from image fullrun_ccd0_acisf02573_pi14-548_cl_sm2.00.img.gz, (387, 609) - (461, 683)
[Mon Oct 31 09:09:16 2011] Writing fullrun_ccd0_acisf02573_pi14-548_pass1_cl_src1.gif
[Mon Oct 31 09:09:23 2011] ../../acisf02573/products/events/fullrun_ccd0_acisf02573_pi14-548_pass1_cl_src1_src.evt and ../../acisf02573/products/events/fullrun_ccd0_acisf02573_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 31 09:09:23 2011] Size of ../../acisf02573/products/events/fullrun_ccd0_acisf02573_pi14-548_pass1_cl_src1_src.evt.gz[events] = 26 counts
[Mon Oct 31 09:09:23 2011] Mean chipx,y = (621.62, 623.96)
[Mon Oct 31 09:09:23 2011] Mean tdetx,y = (3684.96, 4510.38)
[Mon Oct 31 09:09:23 2011] chipx,y range = (601.00-639.00, 610.00-646.00)
[Mon Oct 31 09:09:23 2011] Size of ../../acisf02573/products/events/fullrun_ccd0_acisf02573_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 28 counts
[Mon Oct 31 09:09:23 2011] ../../acisf02573/products/images/fullrun_ccd0_acisf02573_pi14-548_pass1_cl_src1_src.img and ../../acisf02573/products/images/fullrun_ccd0_acisf02573_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 31 09:09:23 2011] Not generating rmf since there are only 20 counts
[Mon Oct 31 09:09:23 2011] arf not found, will run specextract
[Mon Oct 31 09:09:27 2011] ../../acisf02573/products/spectra/fullrun_ccd0_acisf02573_pi14-548_pass1_cl_src1_bkg.pi not found
[Mon Oct 31 09:09:27 2011] ../../acisf02573/products/spectra/fullrun_ccd0_acisf02573_pi14-548_pass1_cl_src1.warf not found
[Mon Oct 31 09:09:27 2011] ../../acisf02573/products/spectra/fullrun_ccd0_acisf02573_pi14-548_pass1_cl_src1.wrmf not found
[Mon Oct 31 09:09:27 2011] Removal of ../../acisf02573/products/spectra/fullrun_ccd0_acisf02573_pi14-548_pass1_cl_src1.soff failed
[Mon Oct 31 09:09:27 2011] Failed to rename ../../acisf02573/products/spectra/fullrun_ccd0_acisf02573_pi14-548_pass1_cl_src1_grp.pi to ../../acisf02573/products/spectra/fullrun_ccd0_acisf02573_pi14-548_pass1_cl_src1_src.pi
[Mon Oct 31 09:09:33 2011] ../../acisf02573/products/lightcurves/fullrun_ccd0_acisf02573_pi14-548_pass1_cl_src1_src.lc and ../../acisf02573/products/lightcurves/fullrun_ccd0_acisf02573_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 31 09:14:11 2011] No arf file found
[Mon Oct 31 10:05:19 2011] Updating aperture counts using extracted products
[Mon Oct 31 10:05:19 2011] Error reading totcts from fullrun_ccd0_acisf02573_pi14-548_pass1_cl_src1_src.pi
[Mon Oct 31 10:05:19 2011] No arf file for this source, not re-computing flux
[Mon Oct 31 10:05:36 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 31 10:05:37 2011] acisf02573/analysis//spectral/fullrun_ccd0_acisf02573_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete