[Mon Feb 20 00:35:13 2012] Detection parameters:
  Position = (198.2, 806.9) = 18 2 30.19 -23 0 39.5
  Extent = 0.8" x 0.5", rotation angle = 7 degrees
  Source counts = 31.6 +/- 5.8
  Background counts = 2.4
  Rate = 0.0005 +/- 0.0001

[Mon Feb 20 00:35:17 2012] Off-axis axis estimate = 3.45'
[Mon Feb 20 03:56:20 2012] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 03:56:20 2012] Initial guess for spatial extent in simple fitting = 0.68"
[Mon Feb 20 03:56:20 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.126
[Mon Feb 20 03:56:20 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 0.68"
[Mon Feb 20 05:55:04 2012] fullrun_ccd3_acisf02566_pi14-548_cl_pass0_src61.ximg exists
[Mon Feb 20 05:55:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02566_pi14-548_cl_pass0_src61.csv
[Mon Feb 20 05:55:04 2012] fullrun_ccd3_acisf02566_pi14-548_cl_pass0_src61_1.ximg exists
[Mon Feb 20 05:55:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02566_pi14-548_cl_pass0_src61.csv
[Mon Feb 20 05:55:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02566_pi14-548_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02566_pi14-548_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 05:55:05 2012] fullrun_ccd3_acisf02566_pi14-548_cl_pass0_tfrozen_src61.ximg exists
[Mon Feb 20 05:55:05 2012] fullrun_ccd3_acisf02566_pi14-548_cl_pass0_tfrozen_src61_1.ximg exists
[Mon Feb 20 05:55:05 2012] Fit fullrun_ccd3_acisf02566_pi14-548_cl_pass0_tfrozen_src61 appears to have run properly
[Mon Feb 20 05:55:43 2012] Spatial fit model total counts = 42.999700, observed total counts = 43.000000
[Mon Feb 20 05:55:43 2012] Offset between fit and detection position for source 67 = 0.707419 pixels
[Mon Feb 20 05:55:43 2012] 43.584200 total counts/ 15.701200 bgd. counts: snr = 7.036765
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 0.707419 pixels
  Position = (198.7, 807.3) = 18 2 30.19 -23 0 39.6
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 27.9 +/- 6.6
  Background counts = 15.7
  Rate = 0.0005 +/- 0.0001
[Mon Feb 20 05:55:43 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 05:55:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 05:55:43 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 05:55:43 2012] Source does appear to be extended
[Mon Feb 20 05:55:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 09:16:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 09:16:47 2012] Initial guess for spatial extent in simple fitting = 0.63"
[Mon Feb 20 09:16:47 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.939
[Mon Feb 20 09:16:47 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 0.63"
[Mon Feb 20 11:11:15 2012] fullrun_ccd3_acisf02566_pi14-548_cl_pass1_src59.ximg exists
[Mon Feb 20 11:11:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02566_pi14-548_cl_pass1_src59.csv
[Mon Feb 20 11:11:15 2012] fullrun_ccd3_acisf02566_pi14-548_cl_pass1_src59_1.ximg exists
[Mon Feb 20 11:11:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02566_pi14-548_cl_pass1_src59.csv
[Mon Feb 20 11:11:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02566_pi14-548_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02566_pi14-548_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 11:11:15 2012] fullrun_ccd3_acisf02566_pi14-548_cl_pass1_tfrozen_src59.ximg exists
[Mon Feb 20 11:11:15 2012] fullrun_ccd3_acisf02566_pi14-548_cl_pass1_tfrozen_src59_1.ximg exists
[Mon Feb 20 11:11:15 2012] Fit fullrun_ccd3_acisf02566_pi14-548_cl_pass1_tfrozen_src59 appears to have run properly
[Mon Feb 20 11:11:53 2012] Spatial fit model total counts = 42.999500, observed total counts = 43.000000
[Mon Feb 20 11:11:53 2012] Offset between fit and detection position for source 67 = 0.006944 pixels
[Mon Feb 20 11:11:53 2012] 43.576800 total counts/ 15.563000 bgd. counts: snr = 7.101096
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 0.006944 pixels
  Position = (198.7, 807.3) = 18 2 30.19 -23 0 39.6
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 28.0 +/- 6.6
  Background counts = 15.6
  Rate = 0.0005 +/- 0.0001
[Mon Feb 20 11:11:53 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 11:11:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 11:11:53 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 11:11:53 2012] Source does appear to be extended
[Mon Feb 20 11:11:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 11:41:31 2012] Writing source region out to fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src67_src.reg
[Mon Feb 20 11:41:31 2012] Extracting stamp from image fullrun_ccd3_acisf02566_pi14-548_cl_sm2.00.img.gz, (169, 778) - (228, 837)
[Mon Feb 20 11:41:31 2012] Writing fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src67.gif
[Mon Feb 20 11:52:04 2012] Size of ../../acisf02566/products/events/fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src67_src.evt.gz[events] = 32 counts
[Mon Feb 20 11:52:04 2012] Mean chipx,y = (981.59, 577.97)
[Mon Feb 20 11:52:04 2012] Mean tdetx,y = (4554.03, 4042.59)
[Mon Feb 20 11:52:04 2012] chipx,y range = (963.00-999.00, 560.00-595.00)
[Mon Feb 20 11:52:04 2012] Size of ../../acisf02566/products/events/fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src67_bgd.evt.gz[events] = 36 counts
[Mon Feb 20 11:52:05 2012] Not generating rmf since there are only 28 counts
[Mon Feb 20 11:52:05 2012] arf not found, will run specextract
[Mon Feb 20 11:52:07 2012] ../../acisf02566/products/spectra/fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src67_bkg.pi not found
[Mon Feb 20 11:52:07 2012] ../../acisf02566/products/spectra/fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src67.warf not found
[Mon Feb 20 11:52:07 2012] ../../acisf02566/products/spectra/fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src67.wrmf not found
[Mon Feb 20 11:52:07 2012] Removal of ../../acisf02566/products/spectra/fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src67.soff failed
[Mon Feb 20 11:52:07 2012] Failed to rename ../../acisf02566/products/spectra/fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src67_grp.pi to ../../acisf02566/products/spectra/fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src67_src.pi
[Mon Feb 20 12:03:39 2012] No arf file found
[Mon Feb 20 12:04:15 2012] Updating aperture counts using extracted products
[Mon Feb 20 12:04:15 2012] Error reading totcts from fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src67_src.pi
[Mon Feb 20 12:04:16 2012] No arf file for this source, not re-computing flux
[Mon Feb 20 12:04:27 2012] Source 67 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Feb 20 12:04:28 2012] acisf02566/analysis//spectral/fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src67_pl.csv not found, spectral fit skipped or did not complete