[Mon Feb 20 00:35:15 2012] Detection parameters:
  Position = (517.6, 435.0) = 18 2 18.81 -23 3 42.5
  Extent = 1.8" x 1.1", rotation angle = 41 degrees
  Source counts = 37.8 +/- 6.7
  Background counts = 7.2
  Rate = 0.0007 +/- 0.0001

[Mon Feb 20 00:35:17 2012] Off-axis axis estimate = 6.57'
[Mon Feb 20 03:56:20 2012] Using EEF radius (= 1.93 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 03:56:20 2012] Initial guess for spatial extent in simple fitting = 1.93"
[Mon Feb 20 03:56:20 2012] source mask rpix=3.9, npix_max = 78, mask sum = 72, frac = 0.918
[Mon Feb 20 03:56:20 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 1.93"
[Mon Feb 20 05:55:04 2012] fullrun_ccd3_acisf02566_pi14-548_cl_pass0_src55.ximg exists
[Mon Feb 20 05:55:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02566_pi14-548_cl_pass0_src55.csv
[Mon Feb 20 05:55:04 2012] fullrun_ccd3_acisf02566_pi14-548_cl_pass0_src55_1.ximg exists
[Mon Feb 20 05:55:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02566_pi14-548_cl_pass0_src55.csv
[Mon Feb 20 05:55:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02566_pi14-548_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02566_pi14-548_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 05:55:05 2012] fullrun_ccd3_acisf02566_pi14-548_cl_pass0_tfrozen_src55.ximg exists
[Mon Feb 20 05:55:05 2012] fullrun_ccd3_acisf02566_pi14-548_cl_pass0_tfrozen_src55_1.ximg exists
[Mon Feb 20 05:55:05 2012] Fit fullrun_ccd3_acisf02566_pi14-548_cl_pass0_tfrozen_src55 appears to have run properly
[Mon Feb 20 05:55:43 2012] Spatial fit model total counts = 45.475700, observed total counts = 46.000000
[Mon Feb 20 05:55:43 2012] Offset between fit and detection position for source 110 = 0.449978 pixels
[Mon Feb 20 05:55:43 2012] 45.670130 total counts/ 6.903730 bgd. counts: snr = 14.754129
Spatial fit parameters:
  Offset between fit and detection position for source 110 = 0.449978 pixels
  Position = (517.7, 435.5) = 18 2 18.82 -23 3 42.5
  Extent = 1.8 (1.2-2.4)", rotation angle = 0
  Source counts = 38.8 +/- 6.8
  Background counts = 6.9
  Rate = 0.0007 +/- 0.0001
[Mon Feb 20 05:55:43 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 05:55:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 05:55:43 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 05:55:43 2012] Source does appear to be extended
[Mon Feb 20 05:55:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 09:16:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 09:16:47 2012] Initial guess for spatial extent in simple fitting = 1.78"
[Mon Feb 20 09:16:47 2012] source mask rpix=3.6, npix_max = 67, mask sum = 72, frac = 1.066
[Mon Feb 20 09:16:47 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 1.78"
[Mon Feb 20 11:11:15 2012] fullrun_ccd3_acisf02566_pi14-548_cl_pass1_src53.ximg exists
[Mon Feb 20 11:11:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02566_pi14-548_cl_pass1_src53.csv
[Mon Feb 20 11:11:15 2012] fullrun_ccd3_acisf02566_pi14-548_cl_pass1_src53_1.ximg exists
[Mon Feb 20 11:11:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02566_pi14-548_cl_pass1_src53.csv
[Mon Feb 20 11:11:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02566_pi14-548_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02566_pi14-548_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 11:11:15 2012] fullrun_ccd3_acisf02566_pi14-548_cl_pass1_tfrozen_src53.ximg exists
[Mon Feb 20 11:11:15 2012] fullrun_ccd3_acisf02566_pi14-548_cl_pass1_tfrozen_src53_1.ximg exists
[Mon Feb 20 11:11:15 2012] Fit fullrun_ccd3_acisf02566_pi14-548_cl_pass1_tfrozen_src53 appears to have run properly
[Mon Feb 20 11:11:53 2012] Spatial fit model total counts = 44.609600, observed total counts = 45.000000
[Mon Feb 20 11:11:53 2012] Offset between fit and detection position for source 110 = 0.186912 pixels
[Mon Feb 20 11:11:53 2012] 43.884880 total counts/ 7.898080 bgd. counts: snr = 12.805085
Spatial fit parameters:
  Offset between fit and detection position for source 110 = 0.186912 pixels
  Position = (517.8, 435.6) = 18 2 18.82 -23 3 42.4
  Extent = 1.6 (1.1-2.4)", rotation angle = 0
  Source counts = 36.0 +/- 6.6
  Background counts = 7.9
  Rate = 0.0006 +/- 0.0001
[Mon Feb 20 11:11:53 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 11:11:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 11:11:53 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 11:11:53 2012] Source does appear to be extended
[Mon Feb 20 11:11:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 11:41:31 2012] Writing source region out to fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src110_src.reg
[Mon Feb 20 11:41:31 2012] Extracting stamp from image fullrun_ccd3_acisf02566_pi14-548_cl_sm2.00.img.gz, (443, 361) - (592, 510)
[Mon Feb 20 11:41:31 2012] Writing fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src110.gif
[Mon Feb 20 11:51:01 2012] Size of ../../acisf02566/products/events/fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src110_src.evt.gz[events] = 48 counts
[Mon Feb 20 11:51:01 2012] Mean chipx,y = (572.12, 303.44)
[Mon Feb 20 11:51:01 2012] Mean tdetx,y = (4828.56, 3633.12)
[Mon Feb 20 11:51:01 2012] chipx,y range = (546.00-595.00, 282.00-325.00)
[Mon Feb 20 11:51:01 2012] Size of ../../acisf02566/products/events/fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src110_bgd.evt.gz[events] = 108 counts
[Mon Feb 20 11:51:03 2012] Not generating rmf since there are only 35 counts
[Mon Feb 20 11:51:03 2012] arf not found, will run specextract
[Mon Feb 20 11:51:04 2012] ../../acisf02566/products/spectra/fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src110_bkg.pi not found
[Mon Feb 20 11:51:04 2012] ../../acisf02566/products/spectra/fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src110.warf not found
[Mon Feb 20 11:51:04 2012] ../../acisf02566/products/spectra/fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src110.wrmf not found
[Mon Feb 20 11:51:04 2012] Removal of ../../acisf02566/products/spectra/fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src110.soff failed
[Mon Feb 20 11:51:04 2012] Failed to rename ../../acisf02566/products/spectra/fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src110_grp.pi to ../../acisf02566/products/spectra/fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src110_src.pi
[Mon Feb 20 12:03:39 2012] No arf file found
[Mon Feb 20 12:04:15 2012] Updating aperture counts using extracted products
[Mon Feb 20 12:04:15 2012] Error reading totcts from fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src110_src.pi
[Mon Feb 20 12:04:16 2012] No arf file for this source, not re-computing flux
[Mon Feb 20 12:04:27 2012] Source 110 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Feb 20 12:04:28 2012] acisf02566/analysis//spectral/fullrun_ccd3_acisf02566_pi14-548_pass1_cl_src110_pl.csv not found, spectral fit skipped or did not complete