[Mon Feb 20 00:34:58 2012] Detection parameters:
  Position = (1054.7, 629.6) = 18 2 35.55 -22 59 55.4
  Extent = 0.5" x 0.5", rotation angle = 10 degrees
  Source counts = 92.6 +/- 9.7
  Background counts = 2.4
  Rate = 0.002 +/- 0.0002

[Mon Feb 20 00:35:02 2012] Off-axis axis estimate = 3.39'
[Mon Feb 20 02:00:28 2012] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 02:00:28 2012] Initial guess for spatial extent in simple fitting = 0.67"
[Mon Feb 20 02:00:28 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.872
[Mon Feb 20 02:00:28 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 0.67"
[Mon Feb 20 03:22:12 2012] fullrun_ccd1_acisf02566_pi14-548_cl_pass0_src11.ximg exists
[Mon Feb 20 03:22:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02566_pi14-548_cl_pass0_src11.csv
[Mon Feb 20 03:22:12 2012] fullrun_ccd1_acisf02566_pi14-548_cl_pass0_src11_1.ximg exists
[Mon Feb 20 03:22:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02566_pi14-548_cl_pass0_src11.csv
[Mon Feb 20 03:22:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf02566_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf02566_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 03:22:13 2012] fullrun_ccd1_acisf02566_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Mon Feb 20 03:22:13 2012] fullrun_ccd1_acisf02566_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Feb 20 03:22:13 2012] Fit fullrun_ccd1_acisf02566_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Mon Feb 20 05:55:26 2012] Spatial fit model total counts = 97.998500, observed total counts = 98.000000
[Mon Feb 20 05:55:26 2012] Offset between fit and detection position for source 13 = 0.797313 pixels
[Mon Feb 20 05:55:26 2012] 97.810710 total counts/ 5.692510 bgd. counts: snr = 38.609444
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.797313 pixels
  Position = (1055.3, 630.1) = 18 2 35.55 -22 59 55.4
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 92.1 +/- 9.9
  Background counts = 5.7
  Rate = 0.002 +/- 0.0002
[Mon Feb 20 05:55:27 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 05:55:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 05:55:27 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 05:55:27 2012] Source does appear to be extended
[Mon Feb 20 05:55:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 07:34:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 07:34:25 2012] Initial guess for spatial extent in simple fitting = 0.53"
[Mon Feb 20 07:34:25 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.900
[Mon Feb 20 07:34:25 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 0.53"
[Mon Feb 20 08:41:14 2012] fullrun_ccd1_acisf02566_pi14-548_cl_pass1_src11.ximg exists
[Mon Feb 20 08:41:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02566_pi14-548_cl_pass1_src11.csv
[Mon Feb 20 08:41:14 2012] fullrun_ccd1_acisf02566_pi14-548_cl_pass1_src11_1.ximg exists
[Mon Feb 20 08:41:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02566_pi14-548_cl_pass1_src11.csv
[Mon Feb 20 08:41:14 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf02566_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf02566_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 08:41:15 2012] fullrun_ccd1_acisf02566_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Mon Feb 20 08:41:15 2012] fullrun_ccd1_acisf02566_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Feb 20 08:41:15 2012] Fit fullrun_ccd1_acisf02566_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Feb 20 11:11:37 2012] Spatial fit model total counts = 100.000000, observed total counts = 100.000000
[Mon Feb 20 11:11:37 2012] Offset between fit and detection position for source 13 = 0.006713 pixels
[Mon Feb 20 11:11:37 2012] 99.657400 total counts/ 8.173000 bgd. counts: snr = 32.000465
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.006713 pixels
  Position = (1055.3, 630.1) = 18 2 35.55 -22 59 55.4
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 91.5 +/- 10.0
  Background counts = 8.2
  Rate = 0.002 +/- 0.0002
[Mon Feb 20 11:11:37 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 11:11:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 11:11:37 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 11:11:37 2012] Source does appear to be extended
[Mon Feb 20 11:11:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 11:19:41 2012] Writing source region out to fullrun_ccd1_acisf02566_pi14-548_pass1_cl_src13_src.reg
[Mon Feb 20 11:19:41 2012] Extracting stamp from image fullrun_ccd1_acisf02566_pi14-548_cl_sm2.00.img.gz, (1031, 606) - (1080, 654)
[Mon Feb 20 11:19:41 2012] Writing fullrun_ccd1_acisf02566_pi14-548_pass1_cl_src13.gif
[Mon Feb 20 11:21:34 2012] Size of ../../acisf02566/products/events/fullrun_ccd1_acisf02566_pi14-548_pass1_cl_src13_src.evt.gz[events] = 93 counts
[Mon Feb 20 11:21:34 2012] Mean chipx,y = (102.84, 627.47)
[Mon Feb 20 11:21:34 2012] Mean tdetx,y = (4504.53, 4209.84)
[Mon Feb 20 11:21:34 2012] chipx,y range = (85.00-121.00, 608.00-645.00)
[Mon Feb 20 11:21:34 2012] Size of ../../acisf02566/products/events/fullrun_ccd1_acisf02566_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 19 counts
[Mon Feb 20 11:21:36 2012] Not generating rmf since there are only 91 counts
[Mon Feb 20 11:21:36 2012] arf not found, will run specextract
[Mon Feb 20 11:21:37 2012] ../../acisf02566/products/spectra/fullrun_ccd1_acisf02566_pi14-548_pass1_cl_src13_bkg.pi not found
[Mon Feb 20 11:21:37 2012] ../../acisf02566/products/spectra/fullrun_ccd1_acisf02566_pi14-548_pass1_cl_src13.warf not found
[Mon Feb 20 11:21:37 2012] ../../acisf02566/products/spectra/fullrun_ccd1_acisf02566_pi14-548_pass1_cl_src13.wrmf not found
[Mon Feb 20 11:21:37 2012] Removal of ../../acisf02566/products/spectra/fullrun_ccd1_acisf02566_pi14-548_pass1_cl_src13.soff failed
[Mon Feb 20 11:21:37 2012] Failed to rename ../../acisf02566/products/spectra/fullrun_ccd1_acisf02566_pi14-548_pass1_cl_src13_grp.pi to ../../acisf02566/products/spectra/fullrun_ccd1_acisf02566_pi14-548_pass1_cl_src13_src.pi
[Mon Feb 20 11:33:28 2012] No arf file found
[Mon Feb 20 12:04:13 2012] Updating aperture counts using extracted products
[Mon Feb 20 12:04:13 2012] Error reading totcts from fullrun_ccd1_acisf02566_pi14-548_pass1_cl_src13_src.pi
[Mon Feb 20 12:04:14 2012] No arf file for this source, not re-computing flux
[Mon Feb 20 12:04:25 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Feb 20 12:04:26 2012] acisf02566/analysis//spectral/fullrun_ccd1_acisf02566_pi14-548_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete