[Fri Oct 21 00:47:05 2011] Detection parameters:
  Position = (743.6, 123.2) = 5 35 16.80 -5 39 17.4
  Extent = 0.7" x 0.5", rotation angle = 144 degrees
  Source counts = 42.3 +/- 6.6
  Background counts = 1.7
  Rate = 0.0009 +/- 0.0001

[Fri Oct 21 00:47:08 2011] Off-axis axis estimate = 3.12'
[Fri Oct 21 00:48:49 2011] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 00:48:49 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Fri Oct 21 00:48:49 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.751
[Fri Oct 21 00:48:49 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.61"
[Fri Oct 21 00:48:51 2011] fullrun_ccd0_acisf02548_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct 21 00:48:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02548_pi14-548_cl_pass0_src3.csv
[Fri Oct 21 00:48:51 2011] fullrun_ccd0_acisf02548_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct 21 00:48:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02548_pi14-548_cl_pass0_src3.csv
[Fri Oct 21 00:48:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf02548_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf02548_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 00:48:52 2011] fullrun_ccd0_acisf02548_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct 21 00:48:52 2011] fullrun_ccd0_acisf02548_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct 21 00:48:52 2011] Fit fullrun_ccd0_acisf02548_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Oct 21 00:49:21 2011] Spatial fit model total counts = 43.704500, observed total counts = 46.000000
[Fri Oct 21 00:49:21 2011] Offset between fit and detection position for source 3 = 0.751039 pixels
[Fri Oct 21 00:49:21 2011] 44.499180 total counts/ 6.344080 bgd. counts: snr = 15.148453
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.751039 pixels
  Position = (744.1, 123.8) = 5 35 16.80 -5 39 17.4
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 38.2 +/- 6.7
  Background counts = 6.3
  Rate = 0.0008 +/- 0.0001
[Fri Oct 21 00:49:21 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 00:49:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 00:49:21 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 00:49:21 2011] Source does appear to be extended
[Fri Oct 21 00:49:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 00:50:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 00:50:13 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Fri Oct 21 00:50:13 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.423
[Fri Oct 21 00:50:13 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.58"
[Fri Oct 21 00:50:15 2011] fullrun_ccd0_acisf02548_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct 21 00:50:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02548_pi14-548_cl_pass1_src3.csv
[Fri Oct 21 00:50:15 2011] fullrun_ccd0_acisf02548_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct 21 00:50:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02548_pi14-548_cl_pass1_src3.csv
[Fri Oct 21 00:50:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf02548_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf02548_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 00:50:16 2011] fullrun_ccd0_acisf02548_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct 21 00:50:16 2011] fullrun_ccd0_acisf02548_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct 21 00:50:16 2011] Fit fullrun_ccd0_acisf02548_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Oct 21 00:50:45 2011] Spatial fit model total counts = 46.060200, observed total counts = 46.000000
[Fri Oct 21 00:50:45 2011] Offset between fit and detection position for source 3 = 0.001566 pixels
[Fri Oct 21 00:50:45 2011] 46.502900 total counts/ 6.392200 bgd. counts: snr = 15.864817
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.001566 pixels
  Position = (744.1, 123.8) = 5 35 16.80 -5 39 17.4
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 40.1 +/- 6.8
  Background counts = 6.4
  Rate = 0.0008 +/- 0.0001
[Fri Oct 21 00:50:45 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 00:50:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 00:50:45 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 00:50:45 2011] Source does appear to be extended
[Fri Oct 21 00:50:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 00:51:37 2011] Not overwriting source region fullrun_ccd0_acisf02548_pi14-548_pass1_cl_src3_src.reg
[Fri Oct 21 00:51:37 2011] Extracting stamp from image fullrun_ccd0_acisf02548_pi14-548_cl_sm2.00.img.gz, (718, 98) - (770, 150)
[Fri Oct 21 00:51:37 2011] Writing fullrun_ccd0_acisf02548_pi14-548_pass1_cl_src3.gif
[Fri Oct 21 00:51:49 2011] ../../acisf02548/products/events/fullrun_ccd0_acisf02548_pi14-548_pass1_cl_src3_src.evt and ../../acisf02548/products/events/fullrun_ccd0_acisf02548_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Oct 21 00:51:49 2011] Size of ../../acisf02548/products/events/fullrun_ccd0_acisf02548_pi14-548_pass1_cl_src3_src.evt.gz[events] = 42 counts
[Fri Oct 21 00:51:49 2011] Mean chipx,y = (740.76, 955.12)
[Fri Oct 21 00:51:49 2011] Mean tdetx,y = (4016.12, 4391.24)
[Fri Oct 21 00:51:49 2011] chipx,y range = (724.00-759.00, 937.00-972.00)
[Fri Oct 21 00:51:49 2011] Size of ../../acisf02548/products/events/fullrun_ccd0_acisf02548_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 3 counts
[Fri Oct 21 00:51:49 2011] ../../acisf02548/products/images/fullrun_ccd0_acisf02548_pi14-548_pass1_cl_src3_src.img and ../../acisf02548/products/images/fullrun_ccd0_acisf02548_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Oct 21 00:51:49 2011] ../../acisf02548/products/spectra/fullrun_ccd0_acisf02548_pi14-548_pass1_cl_src3_src.pi and ../../acisf02548/products/spectra/fullrun_ccd0_acisf02548_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Oct 21 00:51:49 2011] Not generating rmf since there are only 40 counts
[Fri Oct 21 00:51:52 2011] ../../acisf02548/products/lightcurves/fullrun_ccd0_acisf02548_pi14-548_pass1_cl_src3_src.lc and ../../acisf02548/products/lightcurves/fullrun_ccd0_acisf02548_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Oct 21 00:55:49 2011] 198.845
[Fri Oct 21 01:03:26 2011] Updating aperture counts using extracted products
[Fri Oct 21 01:03:26 2011] Error reading totcts from fullrun_ccd0_acisf02548_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Oct 21 01:03:27 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 01:03:27 2011] Using photon index=1.80, rate=0.000838, arf fullrun_ccd0_acisf02548_pi14-548_pass1_cl_src3.arf
[Fri Oct 21 01:03:27 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 01:03:27 2011] Updating source flux to 9.2e-15
[Fri Oct 21 01:03:40 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting