[Fri Sep 23 02:15:08 2011] Detection parameters:
  Position = (889.3, 1071.7) = 6 41 5.36 9 33 13.4
  Extent = 0.5" x 0.5", rotation angle = 27 degrees
  Source counts = 2872.1 +/- 53.8
  Background counts = 17.9
  Rate = 0.03 +/- 0.0006

[Fri Sep 23 02:15:17 2011] Off-axis axis estimate = 1.93'
[Fri Sep 23 02:18:20 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 02:18:20 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Fri Sep 23 02:18:20 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.216
[Fri Sep 23 02:18:20 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.42"
[Fri Sep 23 02:18:25 2011] fullrun_ccd1_acisf02540_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 23 02:18:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02540_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 02:18:25 2011] fullrun_ccd1_acisf02540_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 23 02:18:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02540_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 02:18:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf02540_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf02540_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 02:18:28 2011] fullrun_ccd1_acisf02540_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 02:18:28 2011] fullrun_ccd1_acisf02540_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 02:18:28 2011] Fit fullrun_ccd1_acisf02540_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 02:19:45 2011] Spatial fit model total counts = 2898.540000, observed total counts = 2893.000000
[Fri Sep 23 02:19:45 2011] Offset between fit and detection position for source 1 = 0.715401 pixels
[Fri Sep 23 02:19:45 2011] 2902.225400 total counts/ 93.745400 bgd. counts: snr = 290.065684
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.715401 pixels
  Position = (889.8, 1072.2) = 6 41 5.36 9 33 13.4
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 2808.5 +/- 53.9
  Background counts = 93.7
  Rate = 0.03 +/- 0.0006
[Fri Sep 23 02:19:45 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 02:19:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 02:19:45 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 02:19:45 2011] Source does appear to be extended
[Fri Sep 23 02:19:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 02:21:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 02:21:12 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Fri Sep 23 02:21:12 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.129
[Fri Sep 23 02:21:12 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.45"
[Fri Sep 23 02:21:21 2011] fullrun_ccd1_acisf02540_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 23 02:21:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02540_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 02:21:21 2011] fullrun_ccd1_acisf02540_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 23 02:21:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02540_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 02:21:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf02540_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf02540_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 02:21:32 2011] fullrun_ccd1_acisf02540_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 02:21:32 2011] fullrun_ccd1_acisf02540_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 02:21:32 2011] Fit fullrun_ccd1_acisf02540_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 02:22:28 2011] Spatial fit model total counts = 2904.330000, observed total counts = 2894.000000
[Fri Sep 23 02:22:28 2011] Offset between fit and detection position for source 1 = 0.003415 pixels
[Fri Sep 23 02:22:28 2011] 2902.727500 total counts/ 88.347500 bgd. counts: snr = 299.423308
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.003415 pixels
  Position = (889.8, 1072.2) = 6 41 5.36 9 33 13.4
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 2814.4 +/- 53.9
  Background counts = 88.3
  Rate = 0.03 +/- 0.0006
[Fri Sep 23 02:22:28 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 02:22:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 02:22:28 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 02:22:28 2011] Source does appear to be extended
[Fri Sep 23 02:22:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 02:29:08 2011] Not overwriting source region fullrun_ccd1_acisf02540_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 23 02:29:08 2011] Extracting stamp from image fullrun_ccd1_acisf02540_pi14-548_cl_sm2.00.img.gz, (869, 1052) - (910, 1093)
[Fri Sep 23 02:29:09 2011] Writing fullrun_ccd1_acisf02540_pi14-548_pass1_cl_src1.gif
[Fri Sep 23 02:29:25 2011] ../../acisf02540/products/events/fullrun_ccd1_acisf02540_pi14-548_pass1_cl_src1_src.evt and ../../acisf02540/products/events/fullrun_ccd1_acisf02540_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 23 02:29:26 2011] Size of ../../acisf02540/products/events/fullrun_ccd1_acisf02540_pi14-548_pass1_cl_src1_src.evt.gz[events] = 2828 counts
[Fri Sep 23 02:29:26 2011] Mean chipx,y = (140.42, 918.20)
[Fri Sep 23 02:29:26 2011] Mean tdetx,y = (4213.80, 4247.42)
[Fri Sep 23 02:29:26 2011] chipx,y range = (123.00-160.00, 898.00-939.00)
[Fri Sep 23 02:29:26 2011] Size of ../../acisf02540/products/events/fullrun_ccd1_acisf02540_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 52 counts
[Fri Sep 23 02:29:26 2011] ../../acisf02540/products/images/fullrun_ccd1_acisf02540_pi14-548_pass1_cl_src1_src.img and ../../acisf02540/products/images/fullrun_ccd1_acisf02540_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 23 02:29:26 2011] ../../acisf02540/products/spectra/fullrun_ccd1_acisf02540_pi14-548_pass1_cl_src1_src.pi and ../../acisf02540/products/spectra/fullrun_ccd1_acisf02540_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 23 02:29:29 2011] ../../acisf02540/products/lightcurves/fullrun_ccd1_acisf02540_pi14-548_pass1_cl_src1_src.lc and ../../acisf02540/products/lightcurves/fullrun_ccd1_acisf02540_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 23 02:36:21 2011] Keeping rmf generated by specextract
[Fri Sep 23 02:36:21 2011] 204.783
[Fri Sep 23 02:47:32 2011] Updating aperture counts using extracted products
[Fri Sep 23 02:47:32 2011] Error reading totcts from fullrun_ccd1_acisf02540_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 23 02:47:34 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 02:47:34 2011] Using photon index=1.80, rate=0.0294, arf fullrun_ccd1_acisf02540_pi14-548_pass1_cl_src1.arf
[Fri Sep 23 02:47:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 02:47:34 2011] Updating source flux to 3.5e-13
[Fri Sep 23 02:52:28 2011] Reading fit data from acisf02540/analysis//spectral/fullrun_ccd1_acisf02540_pi14-548_pass1_cl_src1_pl.csv
[Fri Sep 23 02:52:28 2011] Spectral fit parameter nH value = 1.80462e+21
[Fri Sep 23 02:52:28 2011] Spectral fit parameter PhoIndex value = 2.5278
[Fri Sep 23 02:52:28 2011] Failed to get F(0.3-8.0) from acisf02540/analysis//spectral/fullrun_ccd1_acisf02540_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 23 02:52:28 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 02:52:28 2011] Using Nh = 1.8e+21, photon index=2.53, rate=0.0294, arf fullrun_ccd1_acisf02540_pi14-548_pass1_cl_src1.arf
[Fri Sep 23 02:52:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 02:52:28 2011] Updating source flux to 2.5e-13