[Wed Oct  5 23:30:28 2011] Detection parameters:
  Position = (1054.6, 920.1) = 5 46 52.26 -51 3 37.9
  Extent = 1.2" x 0.6", rotation angle = 83 degrees
  Source counts = 18.2 +/- 4.8
  Background counts = 4.8
  Rate = 0.002 +/- 0.0005

[Wed Oct  5 23:30:28 2011] Off-axis axis estimate = 4.15'
[Wed Oct  5 23:31:55 2011] Using EEF radius (= 0.88 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 23:31:55 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 23:31:55 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Wed Oct  5 23:31:55 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.962
[Wed Oct  5 23:31:55 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.88"
[Wed Oct  5 23:31:55 2011] fullrun_ccd7_acisf02537_pi14-548_cl_pass0_src6.ximg exists
[Wed Oct  5 23:31:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02537_pi14-548_cl_pass0_src6.csv
[Wed Oct  5 23:31:55 2011] fullrun_ccd7_acisf02537_pi14-548_cl_pass0_src6_1.ximg exists
[Wed Oct  5 23:31:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02537_pi14-548_cl_pass0_src6.csv
[Wed Oct  5 23:31:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02537_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02537_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 23:31:55 2011] fullrun_ccd7_acisf02537_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Wed Oct  5 23:31:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02537_pi14-548_cl_pass0_tfrozen_src6.csv
[Wed Oct  5 23:31:55 2011] fullrun_ccd7_acisf02537_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Oct  5 23:31:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02537_pi14-548_cl_pass0_tfrozen_src6.csv
[Wed Oct  5 23:31:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02537_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02537_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 23:32:03 2011] Spatial fit model total counts = 2.088650, observed total counts = 3.000000
[Wed Oct  5 23:32:03 2011] Offset between fit and detection position for source 8 = 1.232243 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.232243 pixels
  Position = (1055.5, 920.9) = 5 46 52.24 -51 3 37.8
  Extent = 0.2" x 0.2", rotation angle = 0
  Source counts = 2.0 +/- 1.4
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0005
[Wed Oct  5 23:32:03 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 23:32:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 23:32:03 2011] Assessing source extent using major
[Wed Oct  5 23:32:03 2011] Source does appear to be extended
[Wed Oct  5 23:32:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 23:32:03 2011] Deleting source due to low Poisson probability 0.9