[Fri Oct 21 00:27:13 2011] Detection parameters:
  Position = (827.4, 1314.5) = 19 23 41.11 14 31 10.4
  Extent = 0.6" x 0.5", rotation angle = 73 degrees
  Source counts = 15.7 +/- 4.5
  Background counts = 4.3
  Rate = 0.0003 +/- 8e-05

[Fri Oct 21 00:27:15 2011] Off-axis axis estimate = 0.46'
[Fri Oct 21 00:28:23 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 00:28:23 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Oct 21 00:28:23 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.327
[Fri Oct 21 00:28:23 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 0.39"
[Fri Oct 21 00:28:25 2011] fullrun_ccd3_acisf02524_pi14-548_cl_pass0_src25.ximg exists
[Fri Oct 21 00:28:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02524_pi14-548_cl_pass0_src25.csv
[Fri Oct 21 00:28:25 2011] fullrun_ccd3_acisf02524_pi14-548_cl_pass0_src25_1.ximg exists
[Fri Oct 21 00:28:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02524_pi14-548_cl_pass0_src25.csv
[Fri Oct 21 00:28:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02524_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02524_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 00:28:26 2011] fullrun_ccd3_acisf02524_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Fri Oct 21 00:28:26 2011] fullrun_ccd3_acisf02524_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Oct 21 00:28:26 2011] Fit fullrun_ccd3_acisf02524_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Oct 21 00:28:44 2011] Spatial fit model total counts = 38.288900, observed total counts = 39.000000
[Fri Oct 21 00:28:44 2011] Offset between fit and detection position for source 26 = 0.791874 pixels
[Fri Oct 21 00:28:44 2011] 39.926300 total counts/ 29.286600 bgd. counts: snr = 1.966052
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.791874 pixels
  Position = (827.9, 1315.1) = 19 23 41.10 14 31 10.5
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 10.6 +/- 6.3
  Background counts = 29.3
  Rate = 0.0002 +/- 0.0001
[Fri Oct 21 00:28:44 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 00:28:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 00:28:44 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 00:28:44 2011] Source does appear to be extended
[Fri Oct 21 00:28:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 00:29:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 00:29:11 2011] Initial guess for spatial extent in simple fitting = 0.26"
[Fri Oct 21 00:29:11 2011] source mask rpix=0.5, npix_max = 4, mask sum = 4, frac = 0.935
[Fri Oct 21 00:29:11 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 0.26"
[Fri Oct 21 00:29:13 2011] fullrun_ccd3_acisf02524_pi14-548_cl_pass1_src25.ximg exists
[Fri Oct 21 00:29:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02524_pi14-548_cl_pass1_src25.csv
[Fri Oct 21 00:29:13 2011] fullrun_ccd3_acisf02524_pi14-548_cl_pass1_src25_1.ximg exists
[Fri Oct 21 00:29:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02524_pi14-548_cl_pass1_src25.csv
[Fri Oct 21 00:29:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02524_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02524_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 00:29:14 2011] fullrun_ccd3_acisf02524_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Fri Oct 21 00:29:14 2011] fullrun_ccd3_acisf02524_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Oct 21 00:29:14 2011] Fit fullrun_ccd3_acisf02524_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Fri Oct 21 00:29:30 2011] Spatial fit model total counts = 38.565200, observed total counts = 39.000000
[Fri Oct 21 00:29:30 2011] Offset between fit and detection position for source 26 = 0.022540 pixels
[Fri Oct 21 00:29:30 2011] 39.051900 total counts/ 28.134900 bgd. counts: snr = 2.058167
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.022540 pixels
  Position = (827.9, 1315.1) = 19 23 41.10 14 31 10.5
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 10.9 +/- 6.2
  Background counts = 28.1
  Rate = 0.0002 +/- 0.0001
[Fri Oct 21 00:29:30 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 00:29:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 00:29:30 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 00:29:30 2011] Source does appear to be extended
[Fri Oct 21 00:29:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 00:32:59 2011] Not overwriting source region fullrun_ccd3_acisf02524_pi14-548_pass1_cl_src26_src.reg
[Fri Oct 21 00:32:59 2011] Extracting stamp from image fullrun_ccd3_acisf02524_pi14-548_cl_sm2.00.img.gz, (816, 1303) - (840, 1327)
[Fri Oct 21 00:32:59 2011] Writing fullrun_ccd3_acisf02524_pi14-548_pass1_cl_src26.gif
[Fri Oct 21 00:34:11 2011] ../../acisf02524/products/events/fullrun_ccd3_acisf02524_pi14-548_pass1_cl_src26_src.evt and ../../acisf02524/products/events/fullrun_ccd3_acisf02524_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Fri Oct 21 00:34:11 2011] Size of ../../acisf02524/products/events/fullrun_ccd3_acisf02524_pi14-548_pass1_cl_src26_src.evt.gz[events] = 13 counts
[Fri Oct 21 00:34:11 2011] Mean chipx,y = (983.15, 951.46)
[Fri Oct 21 00:34:11 2011] Mean tdetx,y = (4180.54, 4044.15)
[Fri Oct 21 00:34:11 2011] chipx,y range = (966.00-1000.00, 934.00-961.00)
[Fri Oct 21 00:34:11 2011] Size of ../../acisf02524/products/events/fullrun_ccd3_acisf02524_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 15 counts
[Fri Oct 21 00:34:11 2011] ../../acisf02524/products/images/fullrun_ccd3_acisf02524_pi14-548_pass1_cl_src26_src.img and ../../acisf02524/products/images/fullrun_ccd3_acisf02524_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Fri Oct 21 00:34:11 2011] ../../acisf02524/products/spectra/fullrun_ccd3_acisf02524_pi14-548_pass1_cl_src26_src.pi and ../../acisf02524/products/spectra/fullrun_ccd3_acisf02524_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Fri Oct 21 00:34:11 2011] Not generating rmf since there are only 10 counts
[Fri Oct 21 00:34:14 2011] ../../acisf02524/products/lightcurves/fullrun_ccd3_acisf02524_pi14-548_pass1_cl_src26_src.lc and ../../acisf02524/products/lightcurves/fullrun_ccd3_acisf02524_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Fri Oct 21 00:35:18 2011] 206.37
[Fri Oct 21 00:35:39 2011] Updating aperture counts using extracted products
[Fri Oct 21 00:35:39 2011] Error reading totcts from fullrun_ccd3_acisf02524_pi14-548_pass1_cl_src26_src.pi.gz
[Fri Oct 21 00:35:40 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 00:35:40 2011] Using photon index=1.80, rate=0.000204, arf fullrun_ccd3_acisf02524_pi14-548_pass1_cl_src26.arf
[Fri Oct 21 00:35:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 00:35:40 2011] Updating source flux to 3.1e-15
[Fri Oct 21 00:36:00 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting