[Sun Oct 16 22:44:51 2011] Detection parameters:
  Position = (703.2, 1094.4) = 3 17 53.85 -44 11 56.6
  Extent = 0.9" x 0.7", rotation angle = 92 degrees
  Source counts = 17.9 +/- 5.2
  Background counts = 9.1
  Rate = 0.001 +/- 0.0003

[Sun Oct 16 22:44:52 2011] Off-axis axis estimate = 1.76'
[Sun Oct 16 22:45:35 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 22:45:35 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Sun Oct 16 22:45:35 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.270
[Sun Oct 16 22:45:35 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.41"
[Sun Oct 16 22:45:37 2011] fullrun_ccd7_acisf02516_pi14-548_cl_pass0_src10.ximg exists
[Sun Oct 16 22:45:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02516_pi14-548_cl_pass0_src10.csv
[Sun Oct 16 22:45:37 2011] fullrun_ccd7_acisf02516_pi14-548_cl_pass0_src10_1.ximg exists
[Sun Oct 16 22:45:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02516_pi14-548_cl_pass0_src10.csv
[Sun Oct 16 22:45:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02516_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02516_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 22:45:38 2011] fullrun_ccd7_acisf02516_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sun Oct 16 22:45:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02516_pi14-548_cl_pass0_tfrozen_src10.csv
[Sun Oct 16 22:45:38 2011] fullrun_ccd7_acisf02516_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Oct 16 22:45:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02516_pi14-548_cl_pass0_tfrozen_src10.csv
[Sun Oct 16 22:45:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02516_pi14-548_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02516_pi14-548_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 22:45:46 2011] Spatial fit model total counts = 36.327200, observed total counts = 43.000000
[Sun Oct 16 22:45:46 2011] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Oct 16 22:45:46 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 22:45:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 22:45:46 2011] Assessing source extent using major
[Sun Oct 16 22:45:46 2011] Source does appear to be extended
[Sun Oct 16 22:45:46 2011] Computing asymmetry using major and minor axis, asym = 1.27
[Sun Oct 16 22:45:46 2011] Deleting source due to low Poisson probability 0.8