[Mon Sep 26 06:45:19 2011] Detection parameters:
  Position = (143.9, 659.7) = 7 47 26.33 -19 22 31.7
  Extent = 1.0" x 0.7", rotation angle = 157 degrees
  Source counts = 124.9 +/- 11.3
  Background counts = 3.1
  Rate = 0.007 +/- 0.0006

[Mon Sep 26 06:45:20 2011] Off-axis axis estimate = 4.20'
[Mon Sep 26 06:46:43 2011] Using EEF radius (= 0.89 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 06:46:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 06:46:43 2011] Initial guess for spatial extent in simple fitting = 0.89"
[Mon Sep 26 06:46:43 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.933
[Mon Sep 26 06:46:43 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.89"
[Mon Sep 26 06:46:44 2011] fullrun_ccd6_acisf02427_pi14-548_cl_pass0_src1.ximg exists
[Mon Sep 26 06:46:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02427_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 06:46:44 2011] fullrun_ccd6_acisf02427_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Sep 26 06:46:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02427_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 06:46:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02427_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02427_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 06:46:44 2011] fullrun_ccd6_acisf02427_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep 26 06:46:44 2011] fullrun_ccd6_acisf02427_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep 26 06:46:44 2011] Fit fullrun_ccd6_acisf02427_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep 26 06:46:52 2011] Spatial fit model total counts = 130.512000, observed total counts = 128.000000
[Mon Sep 26 06:46:52 2011] Offset between fit and detection position for source 10 = 0.738297 pixels
[Mon Sep 26 06:46:52 2011] 131.274300 total counts/ 11.791300 bgd. counts: snr = 34.795676
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.738297 pixels
  Position = (144.5, 660.1) = 7 47 26.33 -19 22 31.7
  Extent = 1.0 (0.8-1.1)", rotation angle = 0
  Source counts = 119.5 +/- 11.5
  Background counts = 11.8
  Rate = 0.007 +/- 0.0006
[Mon Sep 26 06:46:52 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 06:46:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 06:46:52 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 06:46:52 2011] Source does appear to be extended
[Mon Sep 26 06:46:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 06:47:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 06:47:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 06:47:15 2011] Initial guess for spatial extent in simple fitting = 0.97"
[Mon Sep 26 06:47:15 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.022
[Mon Sep 26 06:47:15 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.97"
[Mon Sep 26 06:47:16 2011] fullrun_ccd6_acisf02427_pi14-548_cl_pass1_src1.ximg exists
[Mon Sep 26 06:47:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02427_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 06:47:16 2011] fullrun_ccd6_acisf02427_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Sep 26 06:47:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02427_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 06:47:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02427_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02427_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 06:47:16 2011] fullrun_ccd6_acisf02427_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Sep 26 06:47:16 2011] fullrun_ccd6_acisf02427_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Sep 26 06:47:16 2011] Fit fullrun_ccd6_acisf02427_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Sep 26 06:47:24 2011] Spatial fit model total counts = 127.997000, observed total counts = 128.000000
[Mon Sep 26 06:47:24 2011] Offset between fit and detection position for source 10 = 0.024054 pixels
[Mon Sep 26 06:47:24 2011] 127.941320 total counts/ 9.358320 bgd. counts: snr = 38.763545
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.024054 pixels
  Position = (144.5, 660.1) = 7 47 26.33 -19 22 31.7
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 118.6 +/- 11.3
  Background counts = 9.4
  Rate = 0.007 +/- 0.0006
[Mon Sep 26 06:47:24 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 06:47:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 06:47:24 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 06:47:24 2011] Source does appear to be extended
[Mon Sep 26 06:47:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 06:48:10 2011] Not overwriting source region fullrun_ccd6_acisf02427_pi14-548_pass1_cl_src10_src.reg
[Mon Sep 26 06:48:10 2011] Extracting stamp from image fullrun_ccd6_acisf02427_pi14-548_cl_sm2.00.img.gz, (99, 615) - (190, 705)
[Mon Sep 26 06:48:10 2011] Writing fullrun_ccd6_acisf02427_pi14-548_pass1_cl_src10.gif
[Mon Sep 26 06:48:12 2011] ../../acisf02427/products/events/fullrun_ccd6_acisf02427_pi14-548_pass1_cl_src10_src.evt and ../../acisf02427/products/events/fullrun_ccd6_acisf02427_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Mon Sep 26 06:48:12 2011] Size of ../../acisf02427/products/events/fullrun_ccd6_acisf02427_pi14-548_pass1_cl_src10_src.evt.gz[events] = 128 counts
[Mon Sep 26 06:48:12 2011] Mean chipx,y = (932.35, 120.39)
[Mon Sep 26 06:48:12 2011] Mean tdetx,y = (3807.35, 1822.39)
[Mon Sep 26 06:48:12 2011] chipx,y range = (913.00-956.00, 101.00-139.00)
[Mon Sep 26 06:48:12 2011] Size of ../../acisf02427/products/events/fullrun_ccd6_acisf02427_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 24 counts
[Mon Sep 26 06:48:12 2011] ../../acisf02427/products/images/fullrun_ccd6_acisf02427_pi14-548_pass1_cl_src10_src.img and ../../acisf02427/products/images/fullrun_ccd6_acisf02427_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Mon Sep 26 06:48:12 2011] ../../acisf02427/products/spectra/fullrun_ccd6_acisf02427_pi14-548_pass1_cl_src10_src.pi and ../../acisf02427/products/spectra/fullrun_ccd6_acisf02427_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Mon Sep 26 06:48:18 2011] ../../acisf02427/products/lightcurves/fullrun_ccd6_acisf02427_pi14-548_pass1_cl_src10_src.lc and ../../acisf02427/products/lightcurves/fullrun_ccd6_acisf02427_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Mon Sep 26 06:48:50 2011] Keeping rmf generated by specextract
[Mon Sep 26 06:48:51 2011] 206.372
[Mon Sep 26 06:49:03 2011] Updating aperture counts using extracted products
[Mon Sep 26 06:49:03 2011] Error reading totcts from fullrun_ccd6_acisf02427_pi14-548_pass1_cl_src10_src.pi.gz
[Mon Sep 26 06:49:03 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 06:49:03 2011] Using photon index=1.80, rate=0.00664, arf fullrun_ccd6_acisf02427_pi14-548_pass1_cl_src10.arf
[Mon Sep 26 06:49:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 06:49:03 2011] Updating source flux to 7.5e-14
[Mon Sep 26 06:49:20 2011] Reading fit data from acisf02427/analysis//spectral/fullrun_ccd6_acisf02427_pi14-548_pass1_cl_src10_pl.csv
[Mon Sep 26 06:49:20 2011] Spectral fit parameter nH value = 3.25192e+14
[Mon Sep 26 06:49:20 2011] Spectral fit parameter PhoIndex value = 4.35415
[Mon Sep 26 06:49:20 2011] Failed to get F(0.3-8.0) from acisf02427/analysis//spectral/fullrun_ccd6_acisf02427_pi14-548_pass1_cl_src10_pl.csv, possibly due to different flux energy range selected
[Mon Sep 26 06:49:20 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 06:49:20 2011] Using Nh = 3.3e+14, photon index=4.35, rate=0.00664, arf fullrun_ccd6_acisf02427_pi14-548_pass1_cl_src10.arf
[Mon Sep 26 06:49:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 06:49:20 2011] Updating source flux to 1.3e-13