[Tue Jan 17 02:44:17 2012] Detection parameters:
  Position = (1150.9, 742.5) = 3 31 44.22 -27 49 28.8
  Extent = 1.4" x 0.6", rotation angle = 142 degrees
  Source counts = 14.2 +/- 4.9
  Background counts = 9.8
  Rate = 0.0002 +/- 7e-05

[Tue Jan 17 02:44:18 2012] Off-axis axis estimate = 9.73'
[Tue Jan 17 03:08:16 2012] Using EEF radius (= 4.19 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 03:08:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 03:08:16 2012] Initial guess for spatial extent in simple fitting = 4.19"
[Tue Jan 17 03:08:16 2012] source mask rpix=8.5, npix_max = 325, mask sum = 327, frac = 1.006
[Tue Jan 17 03:08:16 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 4.19"
[Tue Jan 17 03:41:37 2012] fullrun_ccd1_acisf02409_pi14-548_cl_pass0_src20.ximg exists
[Tue Jan 17 03:41:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02409_pi14-548_cl_pass0_src20.csv
[Tue Jan 17 03:41:37 2012] fullrun_ccd1_acisf02409_pi14-548_cl_pass0_src20_1.ximg exists
[Tue Jan 17 03:41:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02409_pi14-548_cl_pass0_src20.csv
[Tue Jan 17 03:41:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf02409_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf02409_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 03:41:37 2012] fullrun_ccd1_acisf02409_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Tue Jan 17 03:41:37 2012] fullrun_ccd1_acisf02409_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Jan 17 03:41:37 2012] Fit fullrun_ccd1_acisf02409_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Tue Jan 17 05:02:38 2012] Spatial fit model total counts = 48.945300, observed total counts = 49.000000
[Tue Jan 17 05:02:38 2012] Offset between fit and detection position for source 23 = 1.607790 pixels
[Tue Jan 17 05:02:38 2012] 49.079580 total counts/ 39.811700 bgd. counts: snr = 1.468842
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.607790 pixels
  Position = (1151.2, 744.1) = 3 31 44.23 -27 49 28.3
  Extent = 1.7 (1.1-2.5)", rotation angle = 0
  Source counts = 9.3 +/- 7.0
  Background counts = 39.8
  Rate = 0.0001 +/- 0.0001
  Deleting source due to low Poisson probability