[Mon Jan 16 20:53:04 2012] Detection parameters:
  Position = (537.6, 982.2) = 3 32 27.00 -27 41 5.1
  Extent = 1.0" x 0.8", rotation angle = 173 degrees
  Source counts = 503.1 +/- 23.1
  Background counts = 28.9
  Rate = 0.008 +/- 0.0004

[Mon Jan 16 20:53:06 2012] Off-axis axis estimate = 7.65'
[Mon Jan 16 22:13:56 2012] Using EEF radius (= 2.59 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 22:13:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan 16 22:13:56 2012] Initial guess for spatial extent in simple fitting = 2.59"
[Mon Jan 16 22:13:56 2012] source mask rpix=5.3, npix_max = 132, mask sum = 131, frac = 0.987
[Mon Jan 16 22:13:56 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 2.59"
[Mon Jan 16 22:54:35 2012] fullrun_ccd3_acisf02405_pi14-548_cl_pass0_src1.ximg exists
[Mon Jan 16 22:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02405_pi14-548_cl_pass0_src1.csv
[Mon Jan 16 22:54:35 2012] fullrun_ccd3_acisf02405_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Jan 16 22:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02405_pi14-548_cl_pass0_src1.csv
[Mon Jan 16 22:54:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02405_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02405_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 22:54:36 2012] fullrun_ccd3_acisf02405_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Jan 16 22:54:36 2012] fullrun_ccd3_acisf02405_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jan 16 22:54:36 2012] Fit fullrun_ccd3_acisf02405_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jan 16 23:20:33 2012] Spatial fit model total counts = 547.197000, observed total counts = 543.000000
[Mon Jan 16 23:20:33 2012] Offset between fit and detection position for source 3 = 0.377696 pixels
[Mon Jan 16 23:20:33 2012] 547.362000 total counts/ 34.773000 bgd. counts: snr = 86.925701
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.377696 pixels
  Position = (537.8, 982.5) = 3 32 27.01 -27 41 5.2
  Extent = 2.3 (2.1-2.5)", rotation angle = 0
  Source counts = 512.6 +/- 23.4
  Background counts = 34.8
  Rate = 0.009 +/- 0.0004
[Mon Jan 16 23:20:33 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 23:20:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 23:20:33 2012] Assessing source extent using major axis lower bound
[Mon Jan 16 23:20:33 2012] Source does appear to be extended
[Mon Jan 16 23:20:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 00:23:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 00:23:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 00:23:28 2012] Initial guess for spatial extent in simple fitting = 2.32"
[Tue Jan 17 00:23:28 2012] source mask rpix=4.7, npix_max = 108, mask sum = 110, frac = 1.010
[Tue Jan 17 00:23:28 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.32"
[Tue Jan 17 00:53:58 2012] fullrun_ccd3_acisf02405_pi14-548_cl_pass1_src1.ximg exists
[Tue Jan 17 00:53:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02405_pi14-548_cl_pass1_src1.csv
[Tue Jan 17 00:53:58 2012] fullrun_ccd3_acisf02405_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Jan 17 00:53:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02405_pi14-548_cl_pass1_src1.csv
[Tue Jan 17 00:53:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02405_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02405_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 00:53:58 2012] fullrun_ccd3_acisf02405_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 17 00:53:58 2012] fullrun_ccd3_acisf02405_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 17 00:53:58 2012] Fit fullrun_ccd3_acisf02405_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan 17 01:20:36 2012] Spatial fit model total counts = 539.529000, observed total counts = 540.000000
[Tue Jan 17 01:20:36 2012] Offset between fit and detection position for source 3 = 0.253675 pixels
[Tue Jan 17 01:20:36 2012] 540.263200 total counts/ 47.488200 bgd. counts: snr = 71.508194
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.253675 pixels
  Position = (537.5, 982.5) = 3 32 27.02 -27 41 5.2
  Extent = 2.2 (2.0-2.4)", rotation angle = 0
  Source counts = 492.8 +/- 23.2
  Background counts = 47.5
  Rate = 0.008 +/- 0.0004
[Tue Jan 17 01:20:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 01:20:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 01:20:36 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 01:20:36 2012] Source does appear to be extended
[Tue Jan 17 01:20:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 02:00:03 2012] Writing source region out to fullrun_ccd3_acisf02405_pi14-548_pass1_cl_src3_src.reg
[Tue Jan 17 02:00:03 2012] Extracting stamp from image fullrun_ccd3_acisf02405_pi14-548_cl_sm2.00.img.gz, (436, 881) - (639, 1084)
[Tue Jan 17 02:00:03 2012] Writing fullrun_ccd3_acisf02405_pi14-548_pass1_cl_src3.gif
[Tue Jan 17 02:00:06 2012] Size of ../../acisf02405/products/events/fullrun_ccd3_acisf02405_pi14-548_pass1_cl_src3_src.evt.gz[events] = 534 counts
[Tue Jan 17 02:00:06 2012] Mean chipx,y = (172.58, 514.49)
[Tue Jan 17 02:00:06 2012] Mean tdetx,y = (4617.51, 3233.58)
[Tue Jan 17 02:00:06 2012] chipx,y range = (143.00-197.00, 484.00-543.00)
[Tue Jan 17 02:00:06 2012] Size of ../../acisf02405/products/events/fullrun_ccd3_acisf02405_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 164 counts
[Tue Jan 17 02:00:07 2012] rmf not found, will run specextract
[Tue Jan 17 02:00:07 2012] arf not found, will run specextract
[Tue Jan 17 02:00:31 2012] ../../acisf02405/products/spectra/fullrun_ccd3_acisf02405_pi14-548_pass1_cl_src3.warf not found
[Tue Jan 17 02:00:31 2012] ../../acisf02405/products/spectra/fullrun_ccd3_acisf02405_pi14-548_pass1_cl_src3.wrmf not found
[Tue Jan 17 02:00:31 2012] Removal of ../../acisf02405/products/spectra/fullrun_ccd3_acisf02405_pi14-548_pass1_cl_src3.soff failed
[Tue Jan 17 02:15:18 2012] Keeping rmf generated by specextract
[Tue Jan 17 02:15:18 2012] 171.038
[Tue Jan 17 02:17:32 2012] Updating aperture counts using extracted products
[Tue Jan 17 02:17:32 2012] Error reading totcts from fullrun_ccd3_acisf02405_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Jan 17 02:17:33 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 02:17:33 2012] Using photon index=1.80, rate=0.00826, arf fullrun_ccd3_acisf02405_pi14-548_pass1_cl_src3.arf
[Tue Jan 17 02:17:33 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 02:17:33 2012] Updating source flux to 1e-13
[Tue Jan 17 02:17:49 2012] Reading fit data from acisf02405/analysis//spectral/fullrun_ccd3_acisf02405_pi14-548_pass1_cl_src3_pl.csv
[Tue Jan 17 02:17:49 2012] Spectral fit parameter nH value = 1.87788e+14
[Tue Jan 17 02:17:49 2012] Spectral fit parameter PhoIndex value = 1.95965
[Tue Jan 17 02:17:49 2012] Failed to get F(0.3-8.0) from acisf02405/analysis//spectral/fullrun_ccd3_acisf02405_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Jan 17 02:17:49 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 02:17:49 2012] Using Nh = 1.9e+14, photon index=1.96, rate=0.00826, arf fullrun_ccd3_acisf02405_pi14-548_pass1_cl_src3.arf
[Tue Jan 17 02:17:49 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 02:17:49 2012] Updating source flux to 1e-13