[Mon Jan 16 20:53:02 2012] Detection parameters:
  Position = (525.3, 928.3) = 3 33 1.52 -27 45 42.4
  Extent = 2.9" x 0.9", rotation angle = 42 degrees
  Source counts = 19.1 +/- 5.0
  Background counts = 5.9
  Rate = 0.0003 +/- 8e-05

[Mon Jan 16 20:53:02 2012] Off-axis axis estimate = 7.84'
[Mon Jan 16 21:41:15 2012] Using EEF radius (= 2.72 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 21:41:15 2012] Initial guess for spatial extent in simple fitting = 2.72"
[Mon Jan 16 21:41:15 2012] source mask rpix=5.5, npix_max = 145, mask sum = 144, frac = 0.991
[Mon Jan 16 21:41:15 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 2.72"
[Mon Jan 16 22:13:56 2012] fullrun_ccd2_acisf02405_pi14-548_cl_pass0_src12.ximg exists
[Mon Jan 16 22:13:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02405_pi14-548_cl_pass0_src12.csv
[Mon Jan 16 22:13:56 2012] fullrun_ccd2_acisf02405_pi14-548_cl_pass0_src12_1.ximg exists
[Mon Jan 16 22:13:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02405_pi14-548_cl_pass0_src12.csv
[Mon Jan 16 22:13:56 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02405_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02405_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 22:13:56 2012] fullrun_ccd2_acisf02405_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Mon Jan 16 22:13:56 2012] fullrun_ccd2_acisf02405_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Jan 16 22:13:56 2012] Fit fullrun_ccd2_acisf02405_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Mon Jan 16 23:20:30 2012] Spatial fit model total counts = 32.348500, observed total counts = 33.000000
[Mon Jan 16 23:20:30 2012] Offset between fit and detection position for source 28 = 7.911584 pixels
[Mon Jan 16 23:20:30 2012] 33.573530 total counts/ 1.773230 bgd. counts: snr = 23.880790
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 7.911584 pixels
  Position = (518.3, 924.6) = 3 33 1.80 -27 45 44.4
  Extent = 4.5 (3.6-4.5)", rotation angle = 0
  Source counts = 31.8 +/- 5.8
  Background counts = 1.8
  Rate = 0.0005 +/- 0.0001
[Mon Jan 16 23:20:30 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 23:20:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 23:20:30 2012] Assessing source extent using major axis lower bound
[Mon Jan 16 23:20:30 2012] Source does appear to be extended
[Mon Jan 16 23:20:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 16 23:55:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 16 23:55:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan 16 23:55:57 2012] Initial guess for spatial extent in simple fitting = 4.51"
[Mon Jan 16 23:55:57 2012] source mask rpix=9.2, npix_max = 374, mask sum = 361, frac = 0.965
[Mon Jan 16 23:55:57 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 4.51"
[Tue Jan 17 00:23:28 2012] fullrun_ccd2_acisf02405_pi14-548_cl_pass1_src12.ximg exists
[Tue Jan 17 00:23:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02405_pi14-548_cl_pass1_src12.csv
[Tue Jan 17 00:23:28 2012] fullrun_ccd2_acisf02405_pi14-548_cl_pass1_src12_1.ximg exists
[Tue Jan 17 00:23:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02405_pi14-548_cl_pass1_src12.csv
[Tue Jan 17 00:23:28 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02405_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02405_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 00:23:28 2012] fullrun_ccd2_acisf02405_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Tue Jan 17 00:23:28 2012] fullrun_ccd2_acisf02405_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Jan 17 00:23:28 2012] Fit fullrun_ccd2_acisf02405_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Tue Jan 17 01:20:33 2012] Source 28 is offset by -5.646016 and -3.006951 pixels which is larger than
2 X fitted extent = 4.585569 x 4.585569, not incorporating fit results
[Tue Jan 17 01:20:33 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 01:20:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 01:20:33 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 01:20:33 2012] Source does appear to be extended
[Tue Jan 17 01:20:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 01:43:08 2012] Writing source region out to fullrun_ccd2_acisf02405_pi14-548_pass1_cl_src28_src.reg
[Tue Jan 17 01:43:08 2012] Extracting stamp from image fullrun_ccd2_acisf02405_pi14-548_cl_sm2.00.img.gz, (312, 718) - (725, 1131)
[Tue Jan 17 01:43:08 2012] Writing fullrun_ccd2_acisf02405_pi14-548_pass1_cl_src28.gif
[Tue Jan 17 01:49:50 2012] Size of ../../acisf02405/products/events/fullrun_ccd2_acisf02405_pi14-548_pass1_cl_src28_src.evt.gz[events] = 70 counts
[Tue Jan 17 01:49:50 2012] Mean chipx,y = (795.07, 455.20)
[Tue Jan 17 01:49:50 2012] Mean tdetx,y = (3516.20, 3290.93)
[Tue Jan 17 01:49:50 2012] chipx,y range = (747.00-839.00, 413.00-497.00)
[Tue Jan 17 01:49:50 2012] Size of ../../acisf02405/products/events/fullrun_ccd2_acisf02405_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 516 counts
[Tue Jan 17 01:49:52 2012] Not generating rmf since there are only 31 counts
[Tue Jan 17 01:49:52 2012] arf not found, will run specextract
[Tue Jan 17 01:50:20 2012] ../../acisf02405/products/spectra/fullrun_ccd2_acisf02405_pi14-548_pass1_cl_src28.warf not found
[Tue Jan 17 01:50:20 2012] ../../acisf02405/products/spectra/fullrun_ccd2_acisf02405_pi14-548_pass1_cl_src28.wrmf not found
[Tue Jan 17 01:50:20 2012] Removal of ../../acisf02405/products/spectra/fullrun_ccd2_acisf02405_pi14-548_pass1_cl_src28.soff failed
[Tue Jan 17 02:00:02 2012] Spectrum 28 has only 32 counts, deleting rmf
[Tue Jan 17 02:00:02 2012] 172.565
[Tue Jan 17 02:17:32 2012] Updating aperture counts using extracted products
[Tue Jan 17 02:17:32 2012] Error reading totcts from fullrun_ccd2_acisf02405_pi14-548_pass1_cl_src28_src.pi.gz
[Tue Jan 17 02:17:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 02:17:32 2012] Using photon index=1.80, rate=0.000533, arf fullrun_ccd2_acisf02405_pi14-548_pass1_cl_src28.arf
[Tue Jan 17 02:17:32 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 02:17:32 2012] Updating source flux to 6.5e-15
[Tue Jan 17 02:17:41 2012] Flag b found in src. 28 procflags, skipping spectral fitting
[Tue Jan 17 02:17:41 2012] Source 28 has fewer than 100.000000 counts, skipping spectral fitting