[Mon Jan 16 20:52:58 2012] Detection parameters:
  Position = (521.3, 1111.6) = 3 32 8.66 -27 47 34.5
  Extent = 0.5" x 0.5", rotation angle = 139 degrees
  Source counts = 652.6 +/- 25.7
  Background counts = 7.4
  Rate = 0.01 +/- 0.0004

[Mon Jan 16 20:53:00 2012] Off-axis axis estimate = 4.60'
[Mon Jan 16 21:10:03 2012] Using EEF radius (= 1.03 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 21:10:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan 16 21:10:03 2012] Initial guess for spatial extent in simple fitting = 1.03"
[Mon Jan 16 21:10:03 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.932
[Mon Jan 16 21:10:03 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 1.03"
[Mon Jan 16 21:41:14 2012] fullrun_ccd1_acisf02405_pi14-548_cl_pass0_src1.ximg exists
[Mon Jan 16 21:41:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02405_pi14-548_cl_pass0_src1.csv
[Mon Jan 16 21:41:14 2012] fullrun_ccd1_acisf02405_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Jan 16 21:41:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02405_pi14-548_cl_pass0_src1.csv
[Mon Jan 16 21:41:14 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf02405_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf02405_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 21:41:14 2012] fullrun_ccd1_acisf02405_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Jan 16 21:41:14 2012] fullrun_ccd1_acisf02405_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jan 16 21:41:14 2012] Fit fullrun_ccd1_acisf02405_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jan 16 23:20:27 2012] Spatial fit model total counts = 684.885000, observed total counts = 683.000000
[Mon Jan 16 23:20:27 2012] Offset between fit and detection position for source 3 = 0.620536 pixels
[Mon Jan 16 23:20:27 2012] 690.189300 total counts/ 81.699300 bgd. counts: snr = 67.320026
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.620536 pixels
  Position = (521.5, 1112.2) = 3 32 8.67 -27 47 34.5
  Extent = 0.8 (0.8-0.9)", rotation angle = 0
  Source counts = 608.5 +/- 26.3
  Background counts = 81.7
  Rate = 0.01 +/- 0.0004
[Mon Jan 16 23:20:27 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 23:20:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 23:20:27 2012] Assessing source extent using major axis lower bound
[Mon Jan 16 23:20:27 2012] Source does appear to be extended
[Mon Jan 16 23:20:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 16 23:31:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 16 23:31:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan 16 23:31:03 2012] Initial guess for spatial extent in simple fitting = 0.82"
[Mon Jan 16 23:31:03 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.074
[Mon Jan 16 23:31:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.82"
[Mon Jan 16 23:55:56 2012] fullrun_ccd1_acisf02405_pi14-548_cl_pass1_src1.ximg exists
[Mon Jan 16 23:55:56 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf02405_pi14-548_cl_pass1_src1.csv
[Mon Jan 16 23:55:56 2012] fullrun_ccd1_acisf02405_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Jan 16 23:55:56 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf02405_pi14-548_cl_pass1_src1.csv
[Mon Jan 16 23:55:56 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf02405_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf02405_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 23:55:57 2012] fullrun_ccd1_acisf02405_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Jan 16 23:55:57 2012] fullrun_ccd1_acisf02405_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jan 16 23:55:57 2012] Fit fullrun_ccd1_acisf02405_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan 17 01:20:31 2012] Spatial fit model total counts = 682.645000, observed total counts = 683.000000
[Tue Jan 17 01:20:31 2012] Offset between fit and detection position for source 3 = 0.020843 pixels
[Tue Jan 17 01:20:31 2012] 682.092200 total counts/ 79.589200 bgd. counts: snr = 67.535504
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.020843 pixels
  Position = (521.5, 1112.2) = 3 32 8.67 -27 47 34.5
  Extent = 0.8 (0.8-0.9)", rotation angle = 0
  Source counts = 602.5 +/- 26.1
  Background counts = 79.6
  Rate = 0.01 +/- 0.0004
[Tue Jan 17 01:20:31 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 01:20:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 01:20:31 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 01:20:31 2012] Source does appear to be extended
[Tue Jan 17 01:20:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 01:29:03 2012] Writing source region out to fullrun_ccd1_acisf02405_pi14-548_pass1_cl_src3_src.reg
[Tue Jan 17 01:29:03 2012] Extracting stamp from image fullrun_ccd1_acisf02405_pi14-548_cl_sm2.00.img.gz, (484, 1075) - (559, 1149)
[Tue Jan 17 01:29:03 2012] Writing fullrun_ccd1_acisf02405_pi14-548_pass1_cl_src3.gif
[Tue Jan 17 01:29:05 2012] Size of ../../acisf02405/products/events/fullrun_ccd1_acisf02405_pi14-548_pass1_cl_src3_src.evt.gz[events] = 661 counts
[Tue Jan 17 01:29:05 2012] Mean chipx,y = (58.06, 454.17)
[Tue Jan 17 01:29:05 2012] Mean tdetx,y = (4677.83, 4165.06)
[Tue Jan 17 01:29:05 2012] chipx,y range = (39.00-81.00, 433.00-474.00)
[Tue Jan 17 01:29:05 2012] Size of ../../acisf02405/products/events/fullrun_ccd1_acisf02405_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 24 counts
[Tue Jan 17 01:29:06 2012] rmf not found, will run specextract
[Tue Jan 17 01:29:06 2012] arf not found, will run specextract
[Tue Jan 17 01:29:33 2012] ../../acisf02405/products/spectra/fullrun_ccd1_acisf02405_pi14-548_pass1_cl_src3.warf not found
[Tue Jan 17 01:29:33 2012] ../../acisf02405/products/spectra/fullrun_ccd1_acisf02405_pi14-548_pass1_cl_src3.wrmf not found
[Tue Jan 17 01:29:33 2012] Removal of ../../acisf02405/products/spectra/fullrun_ccd1_acisf02405_pi14-548_pass1_cl_src3.soff failed
[Tue Jan 17 01:43:08 2012] Keeping rmf generated by specextract
[Tue Jan 17 01:43:08 2012] 190.256
[Tue Jan 17 02:17:31 2012] Updating aperture counts using extracted products
[Tue Jan 17 02:17:31 2012] Error reading totcts from fullrun_ccd1_acisf02405_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Jan 17 02:17:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 02:17:32 2012] Using photon index=1.80, rate=0.0101, arf fullrun_ccd1_acisf02405_pi14-548_pass1_cl_src3.arf
[Tue Jan 17 02:17:32 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 02:17:32 2012] Updating source flux to 1.1e-13
[Tue Jan 17 02:17:41 2012] Reading fit data from acisf02405/analysis//spectral/fullrun_ccd1_acisf02405_pi14-548_pass1_cl_src3_pl.csv
[Tue Jan 17 02:17:41 2012] Spectral fit parameter nH value = 5.69967e+19
[Tue Jan 17 02:17:41 2012] Spectral fit parameter PhoIndex value = 1.87712
[Tue Jan 17 02:17:41 2012] Failed to get F(0.3-8.0) from acisf02405/analysis//spectral/fullrun_ccd1_acisf02405_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Jan 17 02:17:41 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 02:17:41 2012] Using Nh = 5.7e+19, photon index=1.88, rate=0.0101, arf fullrun_ccd1_acisf02405_pi14-548_pass1_cl_src3.arf
[Tue Jan 17 02:17:41 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 02:17:41 2012] Updating source flux to 1.1e-13