[Mon Oct  3 18:19:05 2011] Detection parameters:
  Position = (291.8, 630.4) = 17 44 17.30 -29 39 44.3
  Extent = 0.5" x 0.5", rotation angle = 40 degrees
  Source counts = 403.6 +/- 20.2
  Background counts = 4.4
  Rate = 0.03 +/- 0.002

[Mon Oct  3 18:19:06 2011] Off-axis axis estimate = 3.99'
[Mon Oct  3 18:19:47 2011] Using EEF radius (= 0.83 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 18:19:47 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 18:19:47 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Mon Oct  3 18:19:47 2011] source mask rpix=1.7, npix_max = 19, mask sum = 18, frac = 0.945
[Mon Oct  3 18:19:47 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.83"
[Mon Oct  3 18:19:48 2011] fullrun_ccd1_acisf02278_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct  3 18:19:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02278_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 18:19:48 2011] fullrun_ccd1_acisf02278_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct  3 18:19:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02278_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 18:19:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf02278_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf02278_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 18:19:48 2011] fullrun_ccd1_acisf02278_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct  3 18:19:48 2011] fullrun_ccd1_acisf02278_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct  3 18:19:48 2011] Fit fullrun_ccd1_acisf02278_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct  3 18:19:54 2011] Spatial fit model total counts = 719.540000, observed total counts = 696.000000
[Mon Oct  3 18:19:54 2011] Offset between fit and detection position for source 6 = 1.511002 pixels
[Mon Oct  3 18:19:54 2011] 719.227600 total counts/ 13.553600 bgd. counts: snr = 191.679993
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.511002 pixels
  Position = (293.2, 630.9) = 17 44 17.26 -29 39 44.3
  Extent = 0.8 (0.7-0.8)", rotation angle = 0
  Source counts = 705.7 +/- 26.8
  Background counts = 13.6
  Rate = 0.06 +/- 0.002
[Mon Oct  3 18:19:54 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 18:19:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 18:19:54 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 18:19:54 2011] Source does appear to be extended
[Mon Oct  3 18:19:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 18:20:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 18:20:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 18:20:12 2011] Initial guess for spatial extent in simple fitting = 0.78"
[Mon Oct  3 18:20:12 2011] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.694
[Mon Oct  3 18:20:12 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.78"
[Mon Oct  3 18:20:15 2011] fullrun_ccd1_acisf02278_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct  3 18:20:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02278_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 18:20:15 2011] fullrun_ccd1_acisf02278_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct  3 18:20:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf02278_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 18:20:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf02278_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf02278_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 18:20:15 2011] fullrun_ccd1_acisf02278_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct  3 18:20:15 2011] fullrun_ccd1_acisf02278_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct  3 18:20:15 2011] Fit fullrun_ccd1_acisf02278_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct  3 18:20:21 2011] Spatial fit model total counts = 720.674000, observed total counts = 696.000000
[Mon Oct  3 18:20:21 2011] Offset between fit and detection position for source 6 = 0.018483 pixels
[Mon Oct  3 18:20:21 2011] 719.475800 total counts/ 13.881800 bgd. counts: snr = 189.379074
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.018483 pixels
  Position = (293.2, 630.9) = 17 44 17.26 -29 39 44.3
  Extent = 0.8 (0.7-0.8)", rotation angle = 0
  Source counts = 705.6 +/- 26.8
  Background counts = 13.9
  Rate = 0.06 +/- 0.002
[Mon Oct  3 18:20:21 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 18:20:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 18:20:21 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 18:20:21 2011] Source does appear to be extended
[Mon Oct  3 18:20:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 18:21:01 2011] Not overwriting source region fullrun_ccd1_acisf02278_pi14-548_pass1_cl_src6_src.reg
[Mon Oct  3 18:21:01 2011] Extracting stamp from image fullrun_ccd1_acisf02278_pi14-548_cl_sm2.00.img.gz, (258, 595) - (329, 667)
[Mon Oct  3 18:21:01 2011] Writing fullrun_ccd1_acisf02278_pi14-548_pass1_cl_src6.gif
[Mon Oct  3 18:21:02 2011] ../../acisf02278/products/events/fullrun_ccd1_acisf02278_pi14-548_pass1_cl_src6_src.evt and ../../acisf02278/products/events/fullrun_ccd1_acisf02278_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Mon Oct  3 18:21:02 2011] Size of ../../acisf02278/products/events/fullrun_ccd1_acisf02278_pi14-548_pass1_cl_src6_src.evt.gz[events] = 690 counts
[Mon Oct  3 18:21:02 2011] Mean chipx,y = (192.52, 586.55)
[Mon Oct  3 18:21:02 2011] Mean tdetx,y = (4545.45, 4299.52)
[Mon Oct  3 18:21:02 2011] chipx,y range = (170.00-212.00, 568.00-606.00)
[Mon Oct  3 18:21:02 2011] Size of ../../acisf02278/products/events/fullrun_ccd1_acisf02278_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 26 counts
[Mon Oct  3 18:21:02 2011] ../../acisf02278/products/images/fullrun_ccd1_acisf02278_pi14-548_pass1_cl_src6_src.img and ../../acisf02278/products/images/fullrun_ccd1_acisf02278_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Mon Oct  3 18:21:02 2011] ../../acisf02278/products/spectra/fullrun_ccd1_acisf02278_pi14-548_pass1_cl_src6_src.pi and ../../acisf02278/products/spectra/fullrun_ccd1_acisf02278_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Mon Oct  3 18:21:05 2011] ../../acisf02278/products/lightcurves/fullrun_ccd1_acisf02278_pi14-548_pass1_cl_src6_src.lc and ../../acisf02278/products/lightcurves/fullrun_ccd1_acisf02278_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Mon Oct  3 18:21:30 2011] Keeping rmf generated by specextract
[Mon Oct  3 18:21:30 2011] 196.039
[Mon Oct  3 18:23:11 2011] Updating aperture counts using extracted products
[Mon Oct  3 18:23:11 2011] Error reading totcts from fullrun_ccd1_acisf02278_pi14-548_pass1_cl_src6_src.pi.gz
[Mon Oct  3 18:23:11 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 18:23:11 2011] Using photon index=1.80, rate=0.0608, arf fullrun_ccd1_acisf02278_pi14-548_pass1_cl_src6.arf
[Mon Oct  3 18:23:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 18:23:11 2011] Updating source flux to 9.7e-13
[Mon Oct  3 18:23:21 2011] Reading fit data from acisf02278/analysis//spectral/fullrun_ccd1_acisf02278_pi14-548_pass1_cl_src6_pl.csv
[Mon Oct  3 18:23:21 2011] Spectral fit parameter nH value = 6.83135e+21
[Mon Oct  3 18:23:21 2011] Spectral fit parameter PhoIndex value = 2.39408
[Mon Oct  3 18:23:21 2011] Failed to get F(0.3-8.0) from acisf02278/analysis//spectral/fullrun_ccd1_acisf02278_pi14-548_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Mon Oct  3 18:23:21 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 18:23:21 2011] Using Nh = 6.8e+21, photon index=2.39, rate=0.0608, arf fullrun_ccd1_acisf02278_pi14-548_pass1_cl_src6.arf
[Mon Oct  3 18:23:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 18:23:21 2011] Updating source flux to 6.3e-13