[Wed Aug  4 06:51:49 2010] Detection parameters:
  Position = (-1037.5, -258.6) = 0 23 14.17 0 27 42.2
  Extent = 0.6" x 0.5", rotation angle = 52 degrees
  Source counts = 67.2 +/- 14.0
  Background counts = 128.8
  Rate = 0.0009 +/- 0.0002

[Wed Aug  4 06:51:49 2010] Off-axis axis estimate = 12.43'
[Wed Aug  4 06:52:56 2010] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting
[Wed Aug  4 06:52:56 2010] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  4 06:52:56 2010] Initial guess for spatial extent in simple fitting = 6.91"
[Wed Aug  4 06:52:56 2010] source mask rpix=14.0, npix_max = 846, mask sum = 768, frac = 0.907
[Wed Aug  4 06:52:56 2010] Giving source the simple spatial ID 3 for pass 0, mean size = 6.91"
[Wed Aug  4 06:52:56 2010] fullrun_ccd5_acisf02253_pi14-548_cl_pass0_src3.ximg exists
[Wed Aug  4 06:52:57 2010] Warning: total counts is not > 0
[Wed Aug  4 06:52:57 2010] fullrun_ccd5_acisf02253_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Aug  4 06:52:57 2010] Warning: total counts is not > 0
[Wed Aug  4 06:52:57 2010] It looks like the fit did not converge
You should probably delete fullrun_ccd5_acisf02253_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd5_acisf02253_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  4 06:52:57 2010] fullrun_ccd5_acisf02253_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Aug  4 06:52:57 2010] Warning: total counts is not > 0
[Wed Aug  4 06:52:57 2010] fullrun_ccd5_acisf02253_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Aug  4 06:52:57 2010] Warning: total counts is not > 0
[Wed Aug  4 06:52:57 2010] It looks like the fit did not converge
You should probably delete fullrun_ccd5_acisf02253_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd5_acisf02253_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  4 06:53:05 2010] Warning, spatial fit 3 centroid is now closest to src. 2
[Wed Aug  4 06:53:05 2010] Source 3 in spatial fitting is no longer close to this source
[Wed Aug  4 06:53:05 2010] Vigneting correction estimate = 1.000000
[Wed Aug  4 06:53:05 2010] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  4 06:53:05 2010] Assessing source extent using major
[Wed Aug  4 06:53:05 2010] Source does appear to be extended
[Wed Aug  4 06:53:05 2010] Computing asymmetry using major and minor axis, asym = 1.32
[Wed Aug  4 06:53:27 2010] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting
[Wed Aug  4 06:53:27 2010] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  4 06:53:27 2010] Initial guess for spatial extent in simple fitting = 6.91"
[Wed Aug  4 06:53:27 2010] source mask rpix=14.0, npix_max = 846, mask sum = 768, frac = 0.907
[Wed Aug  4 06:53:27 2010] Giving source the simple spatial ID 3 for pass 1, mean size = 6.91"
[Wed Aug  4 06:53:27 2010] fullrun_ccd5_acisf02253_pi14-548_cl_pass1_src3.ximg exists
[Wed Aug  4 06:53:27 2010] Warning: total counts is not > 0
[Wed Aug  4 06:53:27 2010] fullrun_ccd5_acisf02253_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Aug  4 06:53:27 2010] Warning: total counts is not > 0
[Wed Aug  4 06:53:27 2010] It looks like the fit did not converge
You should probably delete fullrun_ccd5_acisf02253_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd5_acisf02253_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  4 06:53:27 2010] fullrun_ccd5_acisf02253_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Aug  4 06:53:27 2010] Warning: total counts is not > 0
[Wed Aug  4 06:53:27 2010] fullrun_ccd5_acisf02253_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Aug  4 06:53:27 2010] Warning: total counts is not > 0
[Wed Aug  4 06:53:27 2010] It looks like the fit did not converge
You should probably delete fullrun_ccd5_acisf02253_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd5_acisf02253_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  4 06:53:37 2010] Warning, spatial fit 3 centroid is now closest to src. 19
[Wed Aug  4 06:53:37 2010] Source 3 in spatial fitting is no longer close to this source
[Wed Aug  4 06:53:37 2010] Vigneting correction estimate = 1.000000
[Wed Aug  4 06:53:37 2010] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  4 06:53:37 2010] Assessing source extent using major
[Wed Aug  4 06:53:37 2010] Source does appear to be extended
[Wed Aug  4 06:53:37 2010] Computing asymmetry using major and minor axis, asym = 1.32
[Wed Aug  4 06:54:41 2010] Not overwriting source region fullrun_ccd5_acisf02253_pi14-548_pass1_cl_src3_src.reg
[Wed Aug  4 06:54:41 2010] ../../acisf02253/products/events/fullrun_ccd5_acisf02253_pi14-548_pass1_cl_src3_src.evt and ../../acisf02253/products/events/fullrun_ccd5_acisf02253_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Aug  4 06:54:41 2010] ../../acisf02253/products/events/fullrun_ccd5_acisf02253_pi14-548_pass1_cl_src3_src.evt.gz[events] does not have any counts, not extracting products.
[Wed Aug  4 06:54:41 2010] ../../acisf02253/products/images/fullrun_ccd5_acisf02253_pi14-548_pass1_cl_src3_src.img and ../../acisf02253/products/images/fullrun_ccd5_acisf02253_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Aug  4 06:54:41 2010] ../../acisf02253/products/lightcurves/fullrun_ccd5_acisf02253_pi14-548_pass1_cl_src3_src.lc and ../../acisf02253/products/lightcurves/fullrun_ccd5_acisf02253_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Aug  4 06:54:41 2010] No arf file found
[Wed Aug  4 06:56:48 2010] Updating aperture counts using extracted products
[Wed Aug  4 06:56:48 2010] Error reading totcts from fullrun_ccd5_acisf02253_pi14-548_pass1_cl_src3_src.pi
[Wed Aug  4 06:56:48 2010] No arf file for this source, not re-computing flux