[Fri Sep 30 02:51:57 2011] Detection parameters:
  Position = (966.1, 538.7) = 0 22 31.05 0 24 40.9
  Extent = 0.7" x 0.5", rotation angle = 11 degrees
  Source counts = 21.1 +/- 4.7
  Background counts = 0.9
  Rate = 0.0003 +/- 7e-05

[Fri Sep 30 02:51:59 2011] Off-axis axis estimate = 4.09'
[Fri Sep 30 02:53:08 2011] Using EEF radius (= 0.86 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 02:53:08 2011] Initial guess for spatial extent in simple fitting = 0.86"
[Fri Sep 30 02:53:08 2011] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.996
[Fri Sep 30 02:53:08 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 0.86"
[Fri Sep 30 02:53:09 2011] fullrun_ccd3_acisf02252_pi14-548_cl_pass0_src14.ximg exists
[Fri Sep 30 02:53:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02252_pi14-548_cl_pass0_src14.csv
[Fri Sep 30 02:53:09 2011] fullrun_ccd3_acisf02252_pi14-548_cl_pass0_src14_1.ximg exists
[Fri Sep 30 02:53:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02252_pi14-548_cl_pass0_src14.csv
[Fri Sep 30 02:53:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02252_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02252_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 02:53:09 2011] fullrun_ccd3_acisf02252_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Fri Sep 30 02:53:09 2011] fullrun_ccd3_acisf02252_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Sep 30 02:53:09 2011] Fit fullrun_ccd3_acisf02252_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Sep 30 02:53:30 2011] Spatial fit model total counts = 26.256600, observed total counts = 28.000000
[Fri Sep 30 02:53:30 2011] Offset between fit and detection position for source 5 = 0.586013 pixels
[Fri Sep 30 02:53:30 2011] 27.364030 total counts/ 9.109130 bgd. counts: snr = 6.048407
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.586013 pixels
  Position = (966.5, 539.2) = 0 22 31.06 0 24 40.8
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 18.3 +/- 5.2
  Background counts = 9.1
  Rate = 0.0003 +/- 7e-05
[Fri Sep 30 02:53:30 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 02:53:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 02:53:30 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 02:53:30 2011] Source does appear to be extended
[Fri Sep 30 02:53:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 02:53:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 02:53:57 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Fri Sep 30 02:53:57 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.165
[Fri Sep 30 02:53:57 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 0.44"
[Fri Sep 30 02:53:58 2011] fullrun_ccd3_acisf02252_pi14-548_cl_pass1_src14.ximg exists
[Fri Sep 30 02:53:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02252_pi14-548_cl_pass1_src14.csv
[Fri Sep 30 02:53:58 2011] fullrun_ccd3_acisf02252_pi14-548_cl_pass1_src14_1.ximg exists
[Fri Sep 30 02:53:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02252_pi14-548_cl_pass1_src14.csv
[Fri Sep 30 02:53:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02252_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02252_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 02:53:58 2011] fullrun_ccd3_acisf02252_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Fri Sep 30 02:53:58 2011] fullrun_ccd3_acisf02252_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Sep 30 02:53:58 2011] Fit fullrun_ccd3_acisf02252_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Fri Sep 30 02:54:15 2011] Spatial fit model total counts = 27.591000, observed total counts = 28.000000
[Fri Sep 30 02:54:15 2011] Offset between fit and detection position for source 5 = 0.023418 pixels
[Fri Sep 30 02:54:15 2011] 28.454100 total counts/ 10.382100 bgd. counts: snr = 5.608718
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.023418 pixels
  Position = (966.5, 539.2) = 0 22 31.06 0 24 40.8
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 18.1 +/- 5.3
  Background counts = 10.4
  Rate = 0.0003 +/- 7e-05
[Fri Sep 30 02:54:15 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 02:54:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 02:54:15 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 02:54:15 2011] Source does appear to be extended
[Fri Sep 30 02:54:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 02:58:32 2011] Not overwriting source region fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src5_src.reg
[Fri Sep 30 02:58:32 2011] Extracting stamp from image fullrun_ccd3_acisf02252_pi14-548_cl_sm2.00.img.gz, (947, 520) - (986, 559)
[Fri Sep 30 02:58:32 2011] Writing fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src5.gif
[Fri Sep 30 02:59:21 2011] ../../acisf02252/products/events/fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src5_src.evt and ../../acisf02252/products/events/fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Fri Sep 30 02:59:21 2011] Size of ../../acisf02252/products/events/fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src5_src.evt.gz[events] = 20 counts
[Fri Sep 30 02:59:21 2011] Mean chipx,y = (844.50, 516.40)
[Fri Sep 30 02:59:21 2011] Mean tdetx,y = (4615.60, 3905.50)
[Fri Sep 30 02:59:21 2011] chipx,y range = (825.00-857.00, 499.00-533.00)
[Fri Sep 30 02:59:21 2011] Size of ../../acisf02252/products/events/fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 4 counts
[Fri Sep 30 02:59:21 2011] ../../acisf02252/products/images/fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src5_src.img and ../../acisf02252/products/images/fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Fri Sep 30 02:59:21 2011] ../../acisf02252/products/spectra/fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src5_src.pi and ../../acisf02252/products/spectra/fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Fri Sep 30 02:59:21 2011] Not generating rmf since there are only 18 counts
[Fri Sep 30 02:59:24 2011] ../../acisf02252/products/lightcurves/fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src5_src.lc and ../../acisf02252/products/lightcurves/fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Fri Sep 30 03:00:24 2011] 193.535
[Fri Sep 30 03:01:10 2011] Updating aperture counts using extracted products
[Fri Sep 30 03:01:10 2011] Error reading totcts from fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Sep 30 03:01:10 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 03:01:10 2011] Using photon index=1.80, rate=0.000254, arf fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src5.arf
[Fri Sep 30 03:01:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 03:01:10 2011] Updating source flux to 2.8e-15
[Fri Sep 30 03:01:47 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting