[Fri Sep 30 02:51:58 2011] Detection parameters:
  Position = (1026.5, 385.2) = 0 22 29.07 0 23 25.3
  Extent = 0.5" x 0.5", rotation angle = 20 degrees
  Source counts = 18.1 +/- 4.4
  Background counts = 0.9
  Rate = 0.0003 +/- 6e-05

[Fri Sep 30 02:51:59 2011] Off-axis axis estimate = 2.98'
[Fri Sep 30 02:53:08 2011] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 02:53:08 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Fri Sep 30 02:53:08 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.805
[Fri Sep 30 02:53:08 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.58"
[Fri Sep 30 02:53:09 2011] fullrun_ccd3_acisf02252_pi14-548_cl_pass0_src15.ximg exists
[Fri Sep 30 02:53:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02252_pi14-548_cl_pass0_src15.csv
[Fri Sep 30 02:53:09 2011] fullrun_ccd3_acisf02252_pi14-548_cl_pass0_src15_1.ximg exists
[Fri Sep 30 02:53:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02252_pi14-548_cl_pass0_src15.csv
[Fri Sep 30 02:53:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02252_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02252_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 02:53:09 2011] fullrun_ccd3_acisf02252_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Fri Sep 30 02:53:09 2011] fullrun_ccd3_acisf02252_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Sep 30 02:53:09 2011] Fit fullrun_ccd3_acisf02252_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Sep 30 02:53:30 2011] Spatial fit model total counts = 21.343500, observed total counts = 22.000000
[Fri Sep 30 02:53:30 2011] Offset between fit and detection position for source 16 = 0.938825 pixels
[Fri Sep 30 02:53:30 2011] 20.732890 total counts/ 3.310990 bgd. counts: snr = 9.574511
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.938825 pixels
  Position = (1027.2, 385.8) = 0 22 29.06 0 23 25.4
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 17.4 +/- 4.6
  Background counts = 3.3
  Rate = 0.0002 +/- 6e-05
[Fri Sep 30 02:53:30 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 02:53:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 02:53:30 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 02:53:30 2011] Source does appear to be extended
[Fri Sep 30 02:53:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 02:53:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 02:53:57 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Fri Sep 30 02:53:57 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.224
[Fri Sep 30 02:53:57 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.42"
[Fri Sep 30 02:53:58 2011] fullrun_ccd3_acisf02252_pi14-548_cl_pass1_src15.ximg exists
[Fri Sep 30 02:53:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02252_pi14-548_cl_pass1_src15.csv
[Fri Sep 30 02:53:58 2011] fullrun_ccd3_acisf02252_pi14-548_cl_pass1_src15_1.ximg exists
[Fri Sep 30 02:53:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02252_pi14-548_cl_pass1_src15.csv
[Fri Sep 30 02:53:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02252_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02252_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 02:53:58 2011] fullrun_ccd3_acisf02252_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Fri Sep 30 02:53:58 2011] fullrun_ccd3_acisf02252_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Sep 30 02:53:58 2011] Fit fullrun_ccd3_acisf02252_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Fri Sep 30 02:54:15 2011] Spatial fit model total counts = 21.286500, observed total counts = 22.000000
[Fri Sep 30 02:54:15 2011] Offset between fit and detection position for source 16 = 0.013697 pixels
[Fri Sep 30 02:54:15 2011] 20.436120 total counts/ 2.874520 bgd. counts: snr = 10.358131
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.013697 pixels
  Position = (1027.2, 385.8) = 0 22 29.06 0 23 25.3
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 17.6 +/- 4.5
  Background counts = 2.9
  Rate = 0.0002 +/- 6e-05
[Fri Sep 30 02:54:15 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 02:54:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 02:54:15 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 02:54:15 2011] Source does appear to be extended
[Fri Sep 30 02:54:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 02:58:32 2011] Not overwriting source region fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src16_src.reg
[Fri Sep 30 02:58:32 2011] Extracting stamp from image fullrun_ccd3_acisf02252_pi14-548_cl_sm2.00.img.gz, (1008, 367) - (1046, 405)
[Fri Sep 30 02:58:32 2011] Writing fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src16.gif
[Fri Sep 30 02:59:24 2011] ../../acisf02252/products/events/fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src16_src.evt and ../../acisf02252/products/events/fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src16_bgd.evt exist, delete to re-create
[Fri Sep 30 02:59:24 2011] Size of ../../acisf02252/products/events/fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src16_src.evt.gz[events] = 18 counts
[Fri Sep 30 02:59:24 2011] Mean chipx,y = (958.39, 635.67)
[Fri Sep 30 02:59:24 2011] Mean tdetx,y = (4496.33, 4019.39)
[Fri Sep 30 02:59:24 2011] chipx,y range = (938.00-973.00, 615.00-651.00)
[Fri Sep 30 02:59:24 2011] Size of ../../acisf02252/products/events/fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 4 counts
[Fri Sep 30 02:59:24 2011] ../../acisf02252/products/images/fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src16_src.img and ../../acisf02252/products/images/fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src16_bgd.img exist, delete to re-create
[Fri Sep 30 02:59:24 2011] ../../acisf02252/products/spectra/fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src16_src.pi and ../../acisf02252/products/spectra/fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src16_bgd.pi exist, delete to re-create
[Fri Sep 30 02:59:24 2011] Not generating rmf since there are only 17 counts
[Fri Sep 30 02:59:26 2011] ../../acisf02252/products/lightcurves/fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src16_src.lc and ../../acisf02252/products/lightcurves/fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src16_bgd.lc exist, delete to re-create
[Fri Sep 30 03:00:24 2011] 199.248
[Fri Sep 30 03:01:10 2011] Updating aperture counts using extracted products
[Fri Sep 30 03:01:10 2011] Error reading totcts from fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src16_src.pi.gz
[Fri Sep 30 03:01:10 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 03:01:10 2011] Using photon index=1.80, rate=0.000247, arf fullrun_ccd3_acisf02252_pi14-548_pass1_cl_src16.arf
[Fri Sep 30 03:01:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 03:01:10 2011] Updating source flux to 2.7e-15
[Fri Sep 30 03:01:47 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting