[Fri Sep 30 02:17:04 2011] Detection parameters:
  Position = (282.4, 471.8) = 13 34 45.33 37 57 22.8
  Extent = 0.5" x 0.5", rotation angle = 151 degrees
  Source counts = 26.5 +/- 5.3
  Background counts = 1.5
  Rate = 0.0009 +/- 0.0002

[Fri Sep 30 02:17:05 2011] Off-axis axis estimate = 3.97'
[Fri Sep 30 02:17:52 2011] Using EEF radius (= 0.82 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 02:17:52 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Fri Sep 30 02:17:52 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.065
[Fri Sep 30 02:17:52 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.82"
[Fri Sep 30 02:17:52 2011] fullrun_ccd0_acisf02238_pi14-548_cl_pass0_src3.ximg exists
[Fri Sep 30 02:17:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02238_pi14-548_cl_pass0_src3.csv
[Fri Sep 30 02:17:52 2011] fullrun_ccd0_acisf02238_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Sep 30 02:17:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02238_pi14-548_cl_pass0_src3.csv
[Fri Sep 30 02:17:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf02238_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf02238_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 02:17:53 2011] fullrun_ccd0_acisf02238_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Sep 30 02:17:53 2011] fullrun_ccd0_acisf02238_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Sep 30 02:17:53 2011] Fit fullrun_ccd0_acisf02238_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Sep 30 02:18:00 2011] Spatial fit model total counts = 26.625300, observed total counts = 27.000000
[Fri Sep 30 02:18:00 2011] Offset between fit and detection position for source 3 = 0.636281 pixels
[Fri Sep 30 02:18:00 2011] 26.639300 total counts/ 0.000000 bgd. counts: snr = 187722236085751.093750
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.636281 pixels
  Position = (282.4, 472.5) = 13 34 45.35 37 57 22.8
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 26.6 +/- 5.2
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Fri Sep 30 02:18:00 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 02:18:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 02:18:00 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 02:18:00 2011] Source does appear to be extended
[Fri Sep 30 02:18:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 02:18:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 02:18:22 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Fri Sep 30 02:18:22 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.120
[Fri Sep 30 02:18:22 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.92"
[Fri Sep 30 02:18:22 2011] fullrun_ccd0_acisf02238_pi14-548_cl_pass1_src3.ximg exists
[Fri Sep 30 02:18:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02238_pi14-548_cl_pass1_src3.csv
[Fri Sep 30 02:18:22 2011] fullrun_ccd0_acisf02238_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Sep 30 02:18:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02238_pi14-548_cl_pass1_src3.csv
[Fri Sep 30 02:18:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf02238_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf02238_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 02:18:23 2011] fullrun_ccd0_acisf02238_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Sep 30 02:18:23 2011] fullrun_ccd0_acisf02238_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Sep 30 02:18:23 2011] Fit fullrun_ccd0_acisf02238_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Sep 30 02:18:33 2011] Spatial fit model total counts = 25.627000, observed total counts = 27.000000
[Fri Sep 30 02:18:33 2011] Offset between fit and detection position for source 3 = 0.118794 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.118794 pixels
  Position = (282.4, 472.3) = 13 34 45.35 37 57 22.8
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 25.6 +/- 5.1
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Fri Sep 30 02:18:33 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 02:18:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 02:18:33 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 02:18:33 2011] Source does appear to be extended
[Fri Sep 30 02:18:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 02:18:53 2011] Not overwriting source region fullrun_ccd0_acisf02238_pi14-548_pass1_cl_src3_src.reg
[Fri Sep 30 02:18:53 2011] Extracting stamp from image fullrun_ccd0_acisf02238_pi14-548_cl_sm2.00.img.gz, (239, 429) - (325, 515)
[Fri Sep 30 02:18:53 2011] Writing fullrun_ccd0_acisf02238_pi14-548_pass1_cl_src3.gif
[Fri Sep 30 02:19:01 2011] ../../acisf02238/products/events/fullrun_ccd0_acisf02238_pi14-548_pass1_cl_src3_src.evt and ../../acisf02238/products/events/fullrun_ccd0_acisf02238_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Sep 30 02:19:01 2011] Size of ../../acisf02238/products/events/fullrun_ccd0_acisf02238_pi14-548_pass1_cl_src3_src.evt.gz[events] = 27 counts
[Fri Sep 30 02:19:01 2011] Mean chipx,y = (993.52, 596.81)
[Fri Sep 30 02:19:01 2011] Mean tdetx,y = (3657.81, 4138.48)
[Fri Sep 30 02:19:01 2011] chipx,y range = (979.00-1007.00, 577.00-613.00)
[Fri Sep 30 02:19:01 2011] Size of ../../acisf02238/products/events/fullrun_ccd0_acisf02238_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 17 counts
[Fri Sep 30 02:19:01 2011] ../../acisf02238/products/images/fullrun_ccd0_acisf02238_pi14-548_pass1_cl_src3_src.img and ../../acisf02238/products/images/fullrun_ccd0_acisf02238_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Sep 30 02:19:01 2011] ../../acisf02238/products/spectra/fullrun_ccd0_acisf02238_pi14-548_pass1_cl_src3_src.pi and ../../acisf02238/products/spectra/fullrun_ccd0_acisf02238_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Sep 30 02:19:01 2011] Not generating rmf since there are only 25 counts
[Fri Sep 30 02:19:04 2011] ../../acisf02238/products/lightcurves/fullrun_ccd0_acisf02238_pi14-548_pass1_cl_src3_src.lc and ../../acisf02238/products/lightcurves/fullrun_ccd0_acisf02238_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Sep 30 02:19:40 2011] 173.388
[Fri Sep 30 02:21:24 2011] Updating aperture counts using extracted products
[Fri Sep 30 02:21:24 2011] Error reading totcts from fullrun_ccd0_acisf02238_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Sep 30 02:21:24 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 02:21:24 2011] Using photon index=1.80, rate=0.000954, arf fullrun_ccd0_acisf02238_pi14-548_pass1_cl_src3.arf
[Fri Sep 30 02:21:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 02:21:24 2011] Updating source flux to 1.2e-14
[Fri Sep 30 02:21:28 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting