[Fri Oct 28 17:37:00 2011] Detection parameters:
  Position = (667.6, 661.8) = 13 34 42.77 37 59 15.0
  Extent = 1.2" x 0.5", rotation angle = 98 degrees
  Source counts = 83.4 +/- 9.2
  Background counts = 1.6
  Rate = 0.003 +/- 0.0003

[Fri Oct 28 17:37:02 2011] Off-axis axis estimate = 5.82'
[Fri Oct 28 17:37:54 2011] Using EEF radius (= 1.54 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 17:37:54 2011] Initial guess for spatial extent in simple fitting = 1.54"
[Fri Oct 28 17:37:54 2011] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.928
[Fri Oct 28 17:37:54 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.54"
[Fri Oct 28 17:37:55 2011] fullrun_ccd3_acisf02236_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct 28 17:37:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02236_pi14-548_cl_pass0_src3.csv
[Fri Oct 28 17:37:55 2011] fullrun_ccd3_acisf02236_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct 28 17:37:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02236_pi14-548_cl_pass0_src3.csv
[Fri Oct 28 17:37:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02236_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02236_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 17:37:55 2011] fullrun_ccd3_acisf02236_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct 28 17:37:55 2011] fullrun_ccd3_acisf02236_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct 28 17:37:55 2011] Fit fullrun_ccd3_acisf02236_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Oct 28 17:38:06 2011] Spatial fit model total counts = 88.999300, observed total counts = 89.000000
[Fri Oct 28 17:38:06 2011] Offset between fit and detection position for source 2 = 0.463209 pixels
[Fri Oct 28 17:38:06 2011] 90.051900 total counts/ 20.575500 bgd. counts: snr = 15.316591
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.463209 pixels
  Position = (667.9, 662.1) = 13 34 42.77 37 59 14.9
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 69.5 +/- 9.5
  Background counts = 20.6
  Rate = 0.002 +/- 0.0003
[Fri Oct 28 17:38:06 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 17:38:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 17:38:06 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 17:38:06 2011] Source does appear to be extended
[Fri Oct 28 17:38:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 17:38:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 17:38:29 2011] Initial guess for spatial extent in simple fitting = 0.87"
[Fri Oct 28 17:38:29 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.773
[Fri Oct 28 17:38:29 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.87"
[Fri Oct 28 17:38:30 2011] fullrun_ccd3_acisf02236_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct 28 17:38:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02236_pi14-548_cl_pass1_src3.csv
[Fri Oct 28 17:38:30 2011] fullrun_ccd3_acisf02236_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct 28 17:38:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02236_pi14-548_cl_pass1_src3.csv
[Fri Oct 28 17:38:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02236_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02236_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 17:38:30 2011] fullrun_ccd3_acisf02236_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct 28 17:38:30 2011] fullrun_ccd3_acisf02236_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct 28 17:38:30 2011] Fit fullrun_ccd3_acisf02236_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Oct 28 17:38:41 2011] Spatial fit model total counts = 85.988100, observed total counts = 86.000000
[Fri Oct 28 17:38:41 2011] Offset between fit and detection position for source 2 = 0.004043 pixels
[Fri Oct 28 17:38:41 2011] 86.092500 total counts/ 18.267500 bgd. counts: snr = 15.869025
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.004043 pixels
  Position = (667.9, 662.1) = 13 34 42.77 37 59 14.9
  Extent = 0.8 (0.7-1.1)", rotation angle = 0
  Source counts = 67.8 +/- 9.3
  Background counts = 18.3
  Rate = 0.002 +/- 0.0003
[Fri Oct 28 17:38:41 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 17:38:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 17:38:41 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 17:38:41 2011] Source does appear to be extended
[Fri Oct 28 17:38:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 17:44:04 2011] Not overwriting source region fullrun_ccd3_acisf02236_pi14-548_pass1_cl_src2_src.reg
[Fri Oct 28 17:44:04 2011] Extracting stamp from image fullrun_ccd3_acisf02236_pi14-548_cl_sm2.00.img.gz, (629, 623) - (707, 701)
[Fri Oct 28 17:44:04 2011] Writing fullrun_ccd3_acisf02236_pi14-548_pass1_cl_src2.gif
[Fri Oct 28 17:44:13 2011] ../../acisf02236/products/events/fullrun_ccd3_acisf02236_pi14-548_pass1_cl_src2_src.evt and ../../acisf02236/products/events/fullrun_ccd3_acisf02236_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Oct 28 17:44:13 2011] Size of ../../acisf02236/products/events/fullrun_ccd3_acisf02236_pi14-548_pass1_cl_src2_src.evt.gz[events] = 81 counts
[Fri Oct 28 17:44:13 2011] Mean chipx,y = (446.85, 520.41)
[Fri Oct 28 17:44:13 2011] Mean tdetx,y = (4611.59, 3507.85)
[Fri Oct 28 17:44:13 2011] chipx,y range = (429.00-465.00, 501.00-542.00)
[Fri Oct 28 17:44:13 2011] Size of ../../acisf02236/products/events/fullrun_ccd3_acisf02236_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 17 counts
[Fri Oct 28 17:44:13 2011] ../../acisf02236/products/images/fullrun_ccd3_acisf02236_pi14-548_pass1_cl_src2_src.img and ../../acisf02236/products/images/fullrun_ccd3_acisf02236_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Oct 28 17:44:13 2011] ../../acisf02236/products/spectra/fullrun_ccd3_acisf02236_pi14-548_pass1_cl_src2_src.pi and ../../acisf02236/products/spectra/fullrun_ccd3_acisf02236_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Oct 28 17:44:13 2011] Not generating rmf since there are only 67 counts
[Fri Oct 28 17:44:15 2011] ../../acisf02236/products/lightcurves/fullrun_ccd3_acisf02236_pi14-548_pass1_cl_src2_src.lc and ../../acisf02236/products/lightcurves/fullrun_ccd3_acisf02236_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Oct 28 17:45:25 2011] 181.181
[Fri Oct 28 17:45:39 2011] Updating aperture counts using extracted products
[Fri Oct 28 17:45:39 2011] Error reading totcts from fullrun_ccd3_acisf02236_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Oct 28 17:45:40 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 17:45:40 2011] Using photon index=1.80, rate=0.00228, arf fullrun_ccd3_acisf02236_pi14-548_pass1_cl_src2.arf
[Fri Oct 28 17:45:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 17:45:40 2011] Updating source flux to 2.8e-14
[Fri Oct 28 17:45:57 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting