[Sat Sep 24 05:06:57 2011] Detection parameters:
  Position = (674.2, 1154.1) = 12 36 54.97 62 14 9.9
  Extent = 0.7" x 0.5", rotation angle = 87 degrees
  Source counts = 10.2 +/- 3.5
  Background counts = 1.8
  Rate = 8e-05 +/- 3e-05

[Sat Sep 24 05:07:01 2011] Off-axis axis estimate = 2.26'
[Sat Sep 24 05:08:35 2011] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 05:08:35 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Sat Sep 24 05:08:35 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.093
[Sat Sep 24 05:08:35 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 0.46"
[Sat Sep 24 05:08:36 2011] fullrun_ccd3_acisf02232_pi14-548_cl_pass0_src37.ximg exists
[Sat Sep 24 05:08:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02232_pi14-548_cl_pass0_src37.csv
[Sat Sep 24 05:08:36 2011] fullrun_ccd3_acisf02232_pi14-548_cl_pass0_src37_1.ximg exists
[Sat Sep 24 05:08:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02232_pi14-548_cl_pass0_src37.csv
[Sat Sep 24 05:08:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02232_pi14-548_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02232_pi14-548_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 05:08:40 2011] fullrun_ccd3_acisf02232_pi14-548_cl_pass0_tfrozen_src37.ximg exists
[Sat Sep 24 05:08:42 2011] fullrun_ccd3_acisf02232_pi14-548_cl_pass0_tfrozen_src37_1.ximg exists
[Sat Sep 24 05:08:42 2011] Fit fullrun_ccd3_acisf02232_pi14-548_cl_pass0_tfrozen_src37 appears to have run properly
[Sat Sep 24 05:09:16 2011] Spatial fit model total counts = 15.487400, observed total counts = 16.000000
[Sat Sep 24 05:09:16 2011] Offset between fit and detection position for source 40 = 0.871672 pixels
[Sat Sep 24 05:09:16 2011] 15.398390 total counts/ 4.771890 bgd. counts: snr = 4.864576
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.871672 pixels
  Position = (674.8, 1154.8) = 12 36 54.96 62 14 10.0
  Extent = 0.8 (0.4-1.2)", rotation angle = 0
  Source counts = 10.6 +/- 3.9
  Background counts = 4.8
  Rate = 8e-05 +/- 3e-05
[Sat Sep 24 05:09:16 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 05:09:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 05:09:16 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 05:09:16 2011] Source does appear to be extended
[Sat Sep 24 05:09:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 05:09:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 05:09:53 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Sat Sep 24 05:09:53 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.972
[Sat Sep 24 05:09:53 2011] Giving source the simple spatial ID 35 for pass 1, mean size = 0.75"
[Sat Sep 24 05:09:56 2011] fullrun_ccd3_acisf02232_pi14-548_cl_pass1_src35.ximg exists
[Sat Sep 24 05:09:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02232_pi14-548_cl_pass1_src35.csv
[Sat Sep 24 05:09:56 2011] fullrun_ccd3_acisf02232_pi14-548_cl_pass1_src35_1.ximg exists
[Sat Sep 24 05:09:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02232_pi14-548_cl_pass1_src35.csv
[Sat Sep 24 05:09:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02232_pi14-548_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02232_pi14-548_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 05:10:00 2011] fullrun_ccd3_acisf02232_pi14-548_cl_pass1_tfrozen_src35.ximg exists
[Sat Sep 24 05:10:00 2011] fullrun_ccd3_acisf02232_pi14-548_cl_pass1_tfrozen_src35_1.ximg exists
[Sat Sep 24 05:10:00 2011] Fit fullrun_ccd3_acisf02232_pi14-548_cl_pass1_tfrozen_src35 appears to have run properly
[Sat Sep 24 05:10:34 2011] Spatial fit model total counts = 17.045700, observed total counts = 18.000000
[Sat Sep 24 05:10:34 2011] Offset between fit and detection position for source 40 = 0.251479 pixels
[Sat Sep 24 05:10:34 2011] 16.964100 total counts/ 5.946500 bgd. counts: snr = 4.518105
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.251479 pixels
  Position = (674.8, 1154.5) = 12 36 54.96 62 14 9.9
  Extent = 0.8 (0.4-1.2)", rotation angle = 0
  Source counts = 11.0 +/- 4.1
  Background counts = 5.9
  Rate = 9e-05 +/- 3e-05
[Sat Sep 24 05:10:34 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 05:10:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 05:10:34 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 05:10:34 2011] Source does appear to be extended
[Sat Sep 24 05:10:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 05:16:57 2011] Not overwriting source region fullrun_ccd3_acisf02232_pi14-548_pass1_cl_src40_src.reg
[Sat Sep 24 05:16:57 2011] Extracting stamp from image fullrun_ccd3_acisf02232_pi14-548_cl_sm2.00.img.gz, (639, 1119) - (710, 1190)
[Sat Sep 24 05:16:57 2011] Writing fullrun_ccd3_acisf02232_pi14-548_pass1_cl_src40.gif
[Sat Sep 24 05:19:11 2011] ../../acisf02232/products/events/fullrun_ccd3_acisf02232_pi14-548_pass1_cl_src40_src.evt and ../../acisf02232/products/events/fullrun_ccd3_acisf02232_pi14-548_pass1_cl_src40_bgd.evt exist, delete to re-create
[Sat Sep 24 05:19:11 2011] Size of ../../acisf02232/products/events/fullrun_ccd3_acisf02232_pi14-548_pass1_cl_src40_src.evt.gz[events] = 12 counts
[Sat Sep 24 05:19:11 2011] Mean chipx,y = (876.92, 756.17)
[Sat Sep 24 05:19:11 2011] Mean tdetx,y = (4375.83, 3937.92)
[Sat Sep 24 05:19:11 2011] chipx,y range = (866.00-891.00, 750.00-781.00)
[Sat Sep 24 05:19:11 2011] Size of ../../acisf02232/products/events/fullrun_ccd3_acisf02232_pi14-548_pass1_cl_src40_bgd.evt.gz[events] = 40 counts
[Sat Sep 24 05:19:11 2011] ../../acisf02232/products/images/fullrun_ccd3_acisf02232_pi14-548_pass1_cl_src40_src.img and ../../acisf02232/products/images/fullrun_ccd3_acisf02232_pi14-548_pass1_cl_src40_bgd.img exist, delete to re-create
[Sat Sep 24 05:19:11 2011] ../../acisf02232/products/spectra/fullrun_ccd3_acisf02232_pi14-548_pass1_cl_src40_src.pi and ../../acisf02232/products/spectra/fullrun_ccd3_acisf02232_pi14-548_pass1_cl_src40_bgd.pi exist, delete to re-create
[Sat Sep 24 05:19:11 2011] Not generating rmf since there are only 11 counts
[Sat Sep 24 05:19:14 2011] ../../acisf02232/products/lightcurves/fullrun_ccd3_acisf02232_pi14-548_pass1_cl_src40_src.lc and ../../acisf02232/products/lightcurves/fullrun_ccd3_acisf02232_pi14-548_pass1_cl_src40_bgd.lc exist, delete to re-create
[Sat Sep 24 05:21:10 2011] 203.385
[Sat Sep 24 05:21:58 2011] Updating aperture counts using extracted products
[Sat Sep 24 05:21:58 2011] Error reading totcts from fullrun_ccd3_acisf02232_pi14-548_pass1_cl_src40_src.pi.gz
[Sat Sep 24 05:21:59 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 05:21:59 2011] Using photon index=1.80, rate=8.52e-05, arf fullrun_ccd3_acisf02232_pi14-548_pass1_cl_src40.arf
[Sat Sep 24 05:21:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 05:21:59 2011] Updating source flux to 9.2e-16
[Sat Sep 24 05:23:25 2011] Source 40 has fewer than 100.000000 counts, skipping spectral fitting