[Sat Sep 24 05:06:47 2011] Detection parameters:
  Position = (1122.2, 490.3) = 12 35 28.77 62 14 28.7
  Extent = 1.8" x 1.4", rotation angle = 78 degrees
  Source counts = 19.5 +/- 5.4
  Background counts = 9.5
  Rate = 0.0002 +/- 4e-05

[Sat Sep 24 05:06:51 2011] Off-axis axis estimate = 7.82'
[Sat Sep 24 05:08:32 2011] Using EEF radius (= 2.70 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 05:08:32 2011] Initial guess for spatial extent in simple fitting = 2.70"
[Sat Sep 24 05:08:32 2011] source mask rpix=5.5, npix_max = 143, mask sum = 135, frac = 0.939
[Sat Sep 24 05:08:32 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 2.70"
[Sat Sep 24 05:08:33 2011] fullrun_ccd2_acisf02232_pi14-548_cl_pass0_src26.ximg exists
[Sat Sep 24 05:08:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02232_pi14-548_cl_pass0_src26.csv
[Sat Sep 24 05:08:33 2011] fullrun_ccd2_acisf02232_pi14-548_cl_pass0_src26_1.ximg exists
[Sat Sep 24 05:08:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02232_pi14-548_cl_pass0_src26.csv
[Sat Sep 24 05:08:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02232_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02232_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 05:08:34 2011] fullrun_ccd2_acisf02232_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Sat Sep 24 05:08:34 2011] fullrun_ccd2_acisf02232_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Sat Sep 24 05:08:34 2011] Fit fullrun_ccd2_acisf02232_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Sat Sep 24 05:09:07 2011] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 30.774787 pixels away
[Sat Sep 24 05:09:07 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 05:09:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 05:09:07 2011] Assessing source extent using major
[Sat Sep 24 05:09:07 2011] Source does appear to be extended
[Sat Sep 24 05:09:07 2011] Computing asymmetry using major and minor axis, asym = 1.30
[Sat Sep 24 05:09:51 2011] Using EEF radius (= 2.70 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 05:09:51 2011] Initial guess for spatial extent in simple fitting = 2.70"
[Sat Sep 24 05:09:51 2011] source mask rpix=5.5, npix_max = 143, mask sum = 135, frac = 0.939
[Sat Sep 24 05:09:51 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 2.70"
[Sat Sep 24 05:09:52 2011] fullrun_ccd2_acisf02232_pi14-548_cl_pass1_src26.ximg exists
[Sat Sep 24 05:09:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02232_pi14-548_cl_pass1_src26.csv
[Sat Sep 24 05:09:52 2011] fullrun_ccd2_acisf02232_pi14-548_cl_pass1_src26_1.ximg exists
[Sat Sep 24 05:09:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02232_pi14-548_cl_pass1_src26.csv
[Sat Sep 24 05:09:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02232_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02232_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 05:09:53 2011] fullrun_ccd2_acisf02232_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Sat Sep 24 05:09:53 2011] fullrun_ccd2_acisf02232_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Sat Sep 24 05:09:53 2011] Fit fullrun_ccd2_acisf02232_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Sat Sep 24 05:10:25 2011] Spatial fit model total counts = 54.654600, observed total counts = 53.000000
[Sat Sep 24 05:10:25 2011] Offset between fit and detection position for source 26 = 1.028752 pixels
[Sat Sep 24 05:10:25 2011] 55.604700 total counts/ 37.761700 bgd. counts: snr = 2.903636
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 1.028752 pixels
  Position = (1122.9, 491.0) = 12 35 28.76 62 14 28.9
  Extent = 1.7 (1.0-2.9)", rotation angle = 0
  Source counts = 17.8 +/- 7.5
  Background counts = 37.8
  Rate = 0.0001 +/- 6e-05
[Sat Sep 24 05:10:25 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 05:10:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 05:10:25 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 05:10:25 2011] Source does appear to be extended
[Sat Sep 24 05:10:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 05:14:07 2011] Not overwriting source region fullrun_ccd2_acisf02232_pi14-548_pass1_cl_src26_src.reg
[Sat Sep 24 05:14:07 2011] Extracting stamp from image fullrun_ccd2_acisf02232_pi14-548_cl_sm2.00.img.gz, (1045, 413) - (1201, 569)
[Sat Sep 24 05:14:07 2011] Writing fullrun_ccd2_acisf02232_pi14-548_pass1_cl_src26.gif
[Sat Sep 24 05:15:47 2011] ../../acisf02232/products/events/fullrun_ccd2_acisf02232_pi14-548_pass1_cl_src26_src.evt and ../../acisf02232/products/events/fullrun_ccd2_acisf02232_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Sat Sep 24 05:15:47 2011] Size of ../../acisf02232/products/events/fullrun_ccd2_acisf02232_pi14-548_pass1_cl_src26_src.evt.gz[events] = 39 counts
[Sat Sep 24 05:15:47 2011] Mean chipx,y = (964.64, 384.77)
[Sat Sep 24 05:15:47 2011] Mean tdetx,y = (3445.77, 3121.36)
[Sat Sep 24 05:15:47 2011] chipx,y range = (935.00-987.00, 364.00-405.00)
[Sat Sep 24 05:15:47 2011] Size of ../../acisf02232/products/events/fullrun_ccd2_acisf02232_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 171 counts
[Sat Sep 24 05:15:47 2011] ../../acisf02232/products/images/fullrun_ccd2_acisf02232_pi14-548_pass1_cl_src26_src.img and ../../acisf02232/products/images/fullrun_ccd2_acisf02232_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Sat Sep 24 05:15:47 2011] ../../acisf02232/products/spectra/fullrun_ccd2_acisf02232_pi14-548_pass1_cl_src26_src.pi and ../../acisf02232/products/spectra/fullrun_ccd2_acisf02232_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Sat Sep 24 05:15:47 2011] Not generating rmf since there are only 17 counts
[Sat Sep 24 05:15:51 2011] ../../acisf02232/products/lightcurves/fullrun_ccd2_acisf02232_pi14-548_pass1_cl_src26_src.lc and ../../acisf02232/products/lightcurves/fullrun_ccd2_acisf02232_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Sat Sep 24 05:16:55 2011] 174.19
[Sat Sep 24 05:21:57 2011] Updating aperture counts using extracted products
[Sat Sep 24 05:21:57 2011] Error reading totcts from fullrun_ccd2_acisf02232_pi14-548_pass1_cl_src26_src.pi.gz
[Sat Sep 24 05:21:58 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 05:21:58 2011] Using photon index=1.80, rate=0.000138, arf fullrun_ccd2_acisf02232_pi14-548_pass1_cl_src26.arf
[Sat Sep 24 05:21:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 05:21:58 2011] Updating source flux to 1.8e-15
[Sat Sep 24 05:23:08 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting