[Sun Sep 25 12:43:44 2011] Detection parameters:
  Position = (297.3, 677.4) = 23 11 49.78 -21 44 28.3
  Extent = 0.5" x 0.5", rotation angle = 33 degrees
  Source counts = 10.6 +/- 3.5
  Background counts = 1.4
  Rate = 0.0002 +/- 6e-05

[Sun Sep 25 12:43:46 2011] Off-axis axis estimate = 1.08'
[Sun Sep 25 12:45:04 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 12:45:04 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Sep 25 12:45:04 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.389
[Sun Sep 25 12:45:04 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 0.38"
[Sun Sep 25 12:45:05 2011] fullrun_ccd7_acisf02225_pi14-548_cl_pass0_src29.ximg exists
[Sun Sep 25 12:45:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02225_pi14-548_cl_pass0_src29.csv
[Sun Sep 25 12:45:05 2011] fullrun_ccd7_acisf02225_pi14-548_cl_pass0_src29_1.ximg exists
[Sun Sep 25 12:45:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02225_pi14-548_cl_pass0_src29.csv
[Sun Sep 25 12:45:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02225_pi14-548_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02225_pi14-548_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 12:45:06 2011] fullrun_ccd7_acisf02225_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Sun Sep 25 12:45:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02225_pi14-548_cl_pass0_tfrozen_src29.csv
[Sun Sep 25 12:45:06 2011] fullrun_ccd7_acisf02225_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Sun Sep 25 12:45:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02225_pi14-548_cl_pass0_tfrozen_src29.csv
[Sun Sep 25 12:45:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02225_pi14-548_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02225_pi14-548_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 12:45:20 2011] Spatial fit model total counts = 12.813700, observed total counts = 16.000000
[Sun Sep 25 12:45:20 2011] Offset between fit and detection position for source 16 = 0.721890 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.721890 pixels
  Position = (297.8, 677.9) = 23 11 49.78 -21 44 28.3
  Extent = 0.3 (0.3-0.4)", rotation angle = 0
  Source counts = 11.8 +/- 3.4
  Background counts = 0.0
  Rate = 0.0002 +/- 6e-05
[Sun Sep 25 12:45:20 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 12:45:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 12:45:20 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 12:45:20 2011] Source does appear to be extended
[Sun Sep 25 12:45:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 12:45:20 2011] Deleting source due to low Poisson probability 0.9