[Sun Sep 25 12:43:32 2011] Detection parameters:
  Position = (689.6, 577.5) = 23 11 46.91 -21 56 11.3
  Extent = 6.1" x 5.8", rotation angle = 47 degrees
  Source counts = 74.4 +/- 12.4
  Background counts = 78.6
  Rate = 0.001 +/- 0.0002

[Sun Sep 25 12:43:33 2011] Off-axis axis estimate = 12.44'
[Sun Sep 25 12:44:51 2011] Using EEF radius (= 6.93 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 12:44:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 12:44:51 2011] Initial guess for spatial extent in simple fitting = 6.93"
[Sun Sep 25 12:44:51 2011] source mask rpix=14.1, npix_max = 850, mask sum = 841, frac = 0.989
[Sun Sep 25 12:44:51 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 6.93"
[Sun Sep 25 12:44:55 2011] fullrun_ccd3_acisf02225_pi14-548_cl_pass0_src1.ximg exists
[Sun Sep 25 12:44:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02225_pi14-548_cl_pass0_src1.csv
[Sun Sep 25 12:44:56 2011] fullrun_ccd3_acisf02225_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Sep 25 12:44:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02225_pi14-548_cl_pass0_src1.csv
[Sun Sep 25 12:44:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02225_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02225_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 12:44:59 2011] fullrun_ccd3_acisf02225_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Sep 25 12:44:59 2011] fullrun_ccd3_acisf02225_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Sep 25 12:44:59 2011] Fit fullrun_ccd3_acisf02225_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Sep 25 12:45:11 2011] Spatial fit model total counts = 249.762000, observed total counts = 250.000000
[Sun Sep 25 12:45:11 2011] Offset between fit and detection position for source 1 = 2.531010 pixels
[Sun Sep 25 12:45:11 2011] 250.053400 total counts/ 157.895000 bgd. counts: snr = 7.334166
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.531010 pixels
  Position = (691.2, 579.5) = 23 11 46.87 -21 56 10.6
  Extent = 6.7 (5.3-8.4)", rotation angle = 0
  Source counts = 92.2 +/- 15.8
  Background counts = 157.9
  Rate = 0.002 +/- 0.0003
[Sun Sep 25 12:45:11 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 12:45:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 12:45:11 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 12:45:11 2011] Source does appear to be extended
[Sun Sep 25 12:45:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 12:45:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 12:45:45 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 12:45:45 2011] Initial guess for spatial extent in simple fitting = 6.70"
[Sun Sep 25 12:45:45 2011] source mask rpix=13.6, npix_max = 796, mask sum = 812, frac = 1.019
[Sun Sep 25 12:45:45 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.70"
[Sun Sep 25 12:45:46 2011] fullrun_ccd3_acisf02225_pi14-548_cl_pass1_src1.ximg exists
[Sun Sep 25 12:45:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02225_pi14-548_cl_pass1_src1.csv
[Sun Sep 25 12:45:46 2011] fullrun_ccd3_acisf02225_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Sep 25 12:45:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02225_pi14-548_cl_pass1_src1.csv
[Sun Sep 25 12:45:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02225_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02225_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 12:45:46 2011] fullrun_ccd3_acisf02225_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Sep 25 12:45:46 2011] fullrun_ccd3_acisf02225_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Sep 25 12:45:46 2011] Fit fullrun_ccd3_acisf02225_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Sep 25 12:46:02 2011] Spatial fit model total counts = 242.871000, observed total counts = 242.000000
[Sun Sep 25 12:46:02 2011] Offset between fit and detection position for source 1 = 0.325359 pixels
[Sun Sep 25 12:46:02 2011] 243.111200 total counts/ 151.635000 bgd. counts: snr = 7.428624
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.325359 pixels
  Position = (691.5, 579.6) = 23 11 46.86 -21 56 10.6
  Extent = 6.6 (5.3-8.4)", rotation angle = 0
  Source counts = 91.5 +/- 15.6
  Background counts = 151.6
  Rate = 0.002 +/- 0.0003
[Sun Sep 25 12:46:02 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 12:46:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 12:46:02 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 12:46:02 2011] Source does appear to be extended
[Sun Sep 25 12:46:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 12:46:22 2011] Not overwriting source region fullrun_ccd3_acisf02225_pi14-548_pass1_cl_src1_src.reg
[Sun Sep 25 12:46:22 2011] Extracting stamp from image fullrun_ccd3_acisf02225_pi14-548_cl_sm2.00.img.gz, (389, 277) - (994, 882)
[Sun Sep 25 12:46:22 2011] Writing fullrun_ccd3_acisf02225_pi14-548_pass1_cl_src1.gif
[Sun Sep 25 12:46:25 2011] ../../acisf02225/products/events/fullrun_ccd3_acisf02225_pi14-548_pass1_cl_src1_src.evt and ../../acisf02225/products/events/fullrun_ccd3_acisf02225_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Sep 25 12:46:25 2011] Size of ../../acisf02225/products/events/fullrun_ccd3_acisf02225_pi14-548_pass1_cl_src1_src.evt.gz[events] = 206 counts
[Sun Sep 25 12:46:25 2011] Mean chipx,y = (581.88, 461.82)
[Sun Sep 25 12:46:25 2011] Mean tdetx,y = (4670.18, 3642.88)
[Sun Sep 25 12:46:25 2011] chipx,y range = (520.00-648.00, 412.00-523.00)
[Sun Sep 25 12:46:25 2011] Size of ../../acisf02225/products/events/fullrun_ccd3_acisf02225_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1248 counts
[Sun Sep 25 12:46:25 2011] ../../acisf02225/products/images/fullrun_ccd3_acisf02225_pi14-548_pass1_cl_src1_src.img and ../../acisf02225/products/images/fullrun_ccd3_acisf02225_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Sep 25 12:46:25 2011] Not generating rmf since there are only 91 counts
[Sun Sep 25 12:46:25 2011] arf not found, will run specextract
[Sun Sep 25 12:46:28 2011] ../../acisf02225/products/spectra/fullrun_ccd3_acisf02225_pi14-548_pass1_cl_src1_bkg.pi not found
[Sun Sep 25 12:46:28 2011] ../../acisf02225/products/spectra/fullrun_ccd3_acisf02225_pi14-548_pass1_cl_src1.warf not found
[Sun Sep 25 12:46:28 2011] ../../acisf02225/products/spectra/fullrun_ccd3_acisf02225_pi14-548_pass1_cl_src1.wrmf not found
[Sun Sep 25 12:46:28 2011] Removal of ../../acisf02225/products/spectra/fullrun_ccd3_acisf02225_pi14-548_pass1_cl_src1.soff failed
[Sun Sep 25 12:46:28 2011] Failed to rename ../../acisf02225/products/spectra/fullrun_ccd3_acisf02225_pi14-548_pass1_cl_src1_grp.pi to ../../acisf02225/products/spectra/fullrun_ccd3_acisf02225_pi14-548_pass1_cl_src1_src.pi
[Sun Sep 25 12:46:33 2011] ../../acisf02225/products/lightcurves/fullrun_ccd3_acisf02225_pi14-548_pass1_cl_src1_src.lc and ../../acisf02225/products/lightcurves/fullrun_ccd3_acisf02225_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Sep 25 12:48:14 2011] No arf file found
[Sun Sep 25 12:54:12 2011] Updating aperture counts using extracted products
[Sun Sep 25 12:54:12 2011] Error reading totcts from fullrun_ccd3_acisf02225_pi14-548_pass1_cl_src1_src.pi
[Sun Sep 25 12:54:12 2011] No arf file for this source, not re-computing flux
[Sun Sep 25 12:54:15 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Sep 25 12:54:16 2011] acisf02225/analysis//spectral/fullrun_ccd3_acisf02225_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete